What engines were available in 1963 Impala SS?

Once again, the base engines for all models were the 140 horsepower 230 cubic-inch six cylinder, or the 195 horsepower Turbo-Fire 283 cubic-inch V8. Stepping up to more powerful small-blocks, allowed buyers to choose from two of the available 327 cubic-inch engines.

What Motor came in a 1963 Impala SS?

Standard items that were new for 1963 included a 230-cu.in. inline six-cylinder engine; an updated 283 V-8; safety door latches; self-adjusting Safety Master brakes; extended-life exhaust system; air-washed rocker panels and a Delcotron Generator (alternator), which was first offered in 1962 as an option.

What engine came in the Impala SS?

Starting for the 1962 model year, the Impala SS was an appearance package limited to hardtop coupe and convertible coupe models, available with all engines in the Impala series starting with the base 235 cu in (3.9 L), 135 hp (101 kW; 137 PS) inline-6 through 1967, though the big-block engines and heavy-duty parts ...

What type of motor does 1962 Impala SS have?

Engine choices for 1962 included the 348-cubic-inch V8 discontinued and replaced by the 380 HP 409-cubic-inch or 409 HP 409-cubic-inch engine. These engines could only be ordered with a manual shift transmission. The small-block 283 was offered with a two barrel carburetor.

How do you tell if my 63 Impala is an SS?

There is no differenciation between Impala and SS Impala in the 63 VIN. As you mentioned, that started in 64. The best indication of SS is the trim code on the trim tag for bucket seat nterior.

1963 Chevrolet Impala SS "Mystery Motor"

What engine came in a 1964 Impala SS?

The standard SS engine was actually the Turbo-Thrift 230-cid inline six, rated at a pedestrian 140 hp. Above that were the 195-hp 283, and 250- and 300-hp versions of the 327 mill. Further up the ladder, the Turbo-Fire 409 V-8 was available in three versions.

How can you tell a real Impala SS?

Check the SPID (Service Parts Identification) label in the trunk and make sure the VIN matches the VIN on the dash. Look for the code WX3 on the label. If it's there it's an Impala. There should also be a decal on the drivers side cowl, below the hood hinge just behind the front fender.

How much horsepower did a Chevy 409 have?

The 409 featured a 4.31-inch bore and 3.5-inch stroke. The intake valves were 2.06 inches and fit next to 1.72-inch exhaust valves. Both actuated by a mechanical camshaft that fed air and fuel to forged pistons that created more than 11:1 compression. With its single four-barrel carb, the engine was rated at 360 hp.

Was there a 1962 Impala SS?

For 1962, availability of the SS package was restricted to the Impala convertible and two-door hardtop. However, the $156 option could now be ordered on cars with any engine—even the Chevy six.

What is the rarest Impala?

The 1969 Impala SS was often considered a “sleeper” in that there was no distinctive SS badging inside the car (again, there was no Z03 offered that year), and a true 1969 Z24-optioned car is the rarest and most collectible of any year with this package available.

What is the most sought after Impala?

What year did the Chevy 409 engine come out?

The 409 was introduced at the end of 1961. With a bore of 4.3125 inches and a stroke of 3.5 inches it had a solid lifter cam, a single Carter AFB, and was rated at 360 hp. Due to the late introduction, there were just 142 Impala SS 409 cars produced, making them very rare.

How many 1963 convertible Impalas were made?

The 1963 Chevy Impala constituted more than 50 percent of the company's total output and of 832,600 cars sold, 735,900 had V-8 engines. Chevrolet's full-size styling changed grilles, bumpers, hoods, side panels and rear deck to make the cars look more luxurious.

Was the Chevy 348 a good engine?

The 348 should be remembered not as a mighty powerhouse, but as a smooth and reliable big-block for the new, larger Impala. Its 10-second 0-60 mph capability was about the norm for 1958 - hardly the kick-in-the-back acceleration provided by the FI or dual-quad 283s.

What cars had the 409 engine?

The 409 remained on the Chevy options sheet through 1965, after which it was replaced by the next-generation 396 Big Block. As it stands, you'll regularly still find the early '60s Impala SS with an original 409 in it.

Why was the Chevy 409 discontinued?

But in stark contrast to the Methuselah-like life span of the Chevrolet small-block, as early as 1963 it was clear that the 409 had reached the end of its developmental rope, due primarily to shortcomings in the design of its iconic scalloped heads.

What is a 6.2 Chevy engine?

The 6.2 liter LS3 V8 engine is currently produced by Chevrolet Performance as a crate engine, offering a peak output of 430 horsepower at 5900 RPM. Between 2007 and 2017, the LS3 was used in high-performance vehicles, such as the Camaro and Corvette, among others.

How wide is a 62 Impala?

Hi showtimeca, The dimensions of the 1962 Chevrolet Impala are as follows. Length = 269 inches Width = 124 inches Hope this helps!

What engine came in a 1965 Impala SS?

Because of midyear changes, there were really two model years for 1965. Until February, the Impala SS could be ordered only with a 340- or 400-horsepower version of the 409-cubic-inch V-8 engine. Chevrolet then replaced the 409 with a 325-horsepower, 396-cubic-inch engine.

Is a caprice the same as an Impala?

In a very similar fashion, the Caprice also started out as a trim option for the Impala but quickly superseded the Impala in terms of sales numbers despite its much higher price. The production of the Impala was halted within a few years of the introduction of the Caprice.

What does SS mean on a car?

Super Sport, or SS, is the signature performance option package offered by Chevrolet on a limited number of its vehicles. All SS models come with distinctive "SS" markings on their exterior.