What does the C mean in tire size?

The C-Type tire, on the other hand, is specifically meant as a commercial-rated tire, with a higher load rating for a given size than many LT tires. These C-Type tires will show the letter “C” immediately after the wheel diameter in the tire code. Example: 225/75R16C.

What does C mean on bike tire?

Option A: “C = Clincher Tires“

According to some, the letter “C”, indicates that the tire in question may be a clincher type. “Clinchers” are the most common bicycle tires. They work with a tube and hook up with the rim with a lip (bead).

What does C mean in 700c?

It's a historical relic. At one point in time, "700c" was a standard tire/rim size, where "c" indicated the bead seat diameter and "700" was the diameter, in millimeters, when the tire was installed and inflated. That "700c" tire size has a 622 millimeter bead seat diameter.

What does C in wheels mean?

Option A: “C= Clincher Tires“

According to some, the letter “C”, indicates that the tire in question is a clincher type. “Clinchers” are the most common bicycle tires. They work with an inner tube and connect to the rim with a lip (bead).

What does 700x32c mean?

Here's the simple answer: At its most basic, a 700x32c tire is around 27 1/2 inches by 1 1/4 inches (or 1.26 inches).

How to Read a Tire Size

What does 700x38c mean?

700x38c is the size of your bicycle tire. 700 is the nominal diameter of the tire in millimeters. 38 is the width of the tire (as seen if you were looking at your bike from the front/back). C refers to the old French system of classifying wheels according to their Bead Seat Diameter.

What does 700x40c mean?

The first number refers to the diameter and the second number is the tire width. On a 700x40c tire, the first number indicates that the outside diameter is approximately 700 millimeters.

What does 700x35c mean?

700x35c is the dimension of your bicycle tire, as measured using the 'French system'. Breaking this down, 700 is the nominal diameter of the bike tire in millimeters. The next number, 35, is the nominal width of the tire (again, this is measured in millimeters).

Are 700c and 27.5 the same?

That's changed over the past decade, so the majority of modern mountain bikes now come either with 29in or 27.5in wheels. These two sizes are equivalent to 700c and 650b wheel sizes expressed in the European ETRTO wheel size designations and have the same bead seat diameters.

What does 700x25 28c mean?

New Specialized tires have split sizing. So your 700x25/28 tires have the width of a 25c and height of a 28c.

What does 700x23 28c mean?

“700” is the overall diameter of the bike tire, measured in millimeters. “28” is the width of the tire, again in millimeters and “c” refers to the width code of the tire (like you'd see when you look at your bike either from behind or in front).

What does 700x23 25c mean?

Some manufacturers (e.g., Specialize) offer two width measurements (e.g., 700x23/25c) to indicate that the carcass is 25 mm wide, but that the tread patch is equivalent to a 23 mm tire.

Are 700C and 29 the same?

29" (ISO size 622) is actually the same rim diameter as 700C, although most 29" tires will not fit 700C road rims because they're too wide.

What does 38C mean?

For example, a 38C means a chest measurement of 38 inches and a breast measurement of 41 inches. The difference between the two measurements is 3 inches which is a C cup. A 38D would be a chest measurement of 38 inches and a breast measurement of 42 inches.

Is 622 the same as 700C?

The standard modern road bike wheel has an ISO diameter of 622 mm and is referred to as 700c (makes sense, right? /s).

How wide is a 38C tire?

“The 38c (40mm) width is by far the most popular now, but things keep getting wider,” said Nathan Forbes, Schwalbe brand manager.

Can I put a 700c tire on a 27.5 rim?

No, a 28" tire is 700c generally, but a 27" tire will not fit. Tubes, on the other hand, will work just fine. Show activity on this post. 700 c tire will is too small to put on 27" rim...

Is a 700c wheel 29 inches?

All road and cyclocross bikes are built with 700c wheels, which are 29 inches. However, 700c wheels are designed to accommodate a thinner tire. Many come in widths ranging from 18 to 23 millimeters, with touring tires ranging from 25 to 28 millimeters.

Will a 700c tyre fit a 29?

700c is the same rim bead-seat diameter ETRTO-622 and the same as road 28" and the same as MTB 29" (29er). So yes, you can fit 29" tyres on a 700c rim (of course, subject to the tyre and rim width compatibility What is the maximum or minimum tire width I can fit on my bicycle).

What is the difference between 27 inch and 700C?

The rim diameter of a 700c wheel is actually slightly smaller than that of a '27inch'. 700c bead diameter is 622mm whereas 27" bead diameter is 630mm.

Is a 28 inch tire the same as 700C?

28”/700C/29er

The tyres can differ, but the 28”, 700C and 29er are all the exact same rim diameter. The 700 markings will be followed by the width in mm, and the 28 or 29 markings will be followed by the width in inches. This is the most common wheel size, so look out for familiar markings (such as 28x1.

Are 700 and 700C the same?

The modern standard for road, cyclocross, and many hybrid tires is 700C. You'll also find 700C tires on some European-style cruiser bikes. The "700" refers to the rough outer diameter of the tire, although the actual outer diameter will vary greatly, depending on the type of tire and tread pattern.

What is a 700c tire in inches?

700C = Bigger than 650B & 26, A FAT 700C tire (say, 2-inches wide or more) is called roughly 29-inches, and is called a 29-er. 650B = Medium = 27.5-inch.

How many inches is a 700x38c tire?

Here's the quick answer: In basic terms, a 700x38c tire is approximately 27 1/2 inches by 1 1/2 inches (or 1.50 inches). Easy, yeah?