What does Shocking a pool do?

The term, "Shocking” refers to the process of adding chlorine or non-chlorine chemicals to your pool in order to raise the "free chlorine” level to a point where contaminates such as algae, combined chlorine (also known as chloramines) and bacteria are destroyed.

What are the benefits of shocking your pool?

Why do you need to shock a pool? Pools are shocked to remove combined chlorine molecules, aka chloramines from the water. Pools are also shocked to remove excess bather waste and bacteria after heavy pool use, contamination events, or for the removal of visible algae in the water.

When should I shock my pool?

After Days of Hot Weather

During extended periods of hot weather, the temperature in your pool can rise, leading to bacteria growth and a decrease in the strength of your chlorine. After an extended period of hot, sunny weather, be sure to shock your pool.

Does shocking your pool make it clear?

In summary, if your combined chlorine reads above 0.5 ppm, your water may turn cloudy and become unsafe for swimming. If this is the case, you need to shock your pool immediately to clear it.

Is shock and chlorine the same thing?

Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.

Pool Shock Explained - Swimming Pool Maintenance For Beginners

Can I swim 12 hours after shocking pool?

After Shocking Your Pool

It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!

How long does pool shock take to work?

Always run the pump when shocking the pool and allow it to circulate for 24 hours. The water should then be a blue or cloudy blue color. Test the water 24 hours after shocking and start adjusting pH and alkalinity levels. The chlorine will still be elevated, but over a few days, it should stabilize.

Why did my pool turn cloudy after I shocked it?

High doses of chlorine, like pool shock, can cause temporary cloudiness as it kills contaminants. High levels of pH, alkalinity, and calcium hardness are more likely to cause cloudy water.

How long should you run filter after shocking pool?

While shocking your pool will help kill any germs any algae, it won't actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.

Why did my pool get cloudy overnight?

There are three main causes for cloudy pool water: poor filtration, chemical imbalances, or environmental factors like nearby construction, trees, or wildlife. Filter and pump problems can be caused by a range of issues. If the system is run for just a few hours each day, it may not be able to clean the entire pool.

Should I shock my pool every week?

It's often recommended to shock your pool once a week. If you don't do it every week, you should at least do it every other week. This is necessary to maintain your pool's water chemistry. If you have a lot of people over in your pool or have a party, you may want to shock your pool more frequently.

Can you pour shock directly into pool?

Lithium Hypochlorite Shock

It dissolves much more quickly than calcium hypochlorite, so you can add it directly to your pool without dissolving it beforehand. Commercial versions contain 35% chlorine. It must be used after dusk. It will be roughly eight hours before you can safely swim again.

Is it OK to shock pool during the day?

Best Time to Shock Your Pool

The best time of day to shock pool is when the sun is down. So, experts recommend shocking your pool in the evening or at night, to make sure it does its job. Shocking during the day can be ineffective as UV rays from direct sunlight significantly reduce free chlorine levels.

Will pool shock raise pH?

It will slightly raise your pH, so make sure you adjust pH while using it. As the name implies, it will also raise your calcium hardness levels in your pool slightly. It is sold in granular or in pucks/tablets. A close relative of calcium hypochlorite is sodium hypochlorite, commonly known as bleach.

How long does pool shock last?

As a general rule, most pool chemicals, including pool shock and balancers, should be used within two pool seasons.

Should I brush pool before shocking?

Before you start pouring shock in the pool, the first step is to brush the sides and floor of your pool to loosen all the algae. Doing this breaks the skin and allows the pool shock to more easily kill the algae. Once you've done this, it is important to make sure you have the proper pH level in your water.

Do I run pump after shocking pool?

It is a question a lot of pool owners have and a question that we have the answer to! A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water.

Should you vacuum pool before shocking?

Although vacuuming should be combined with pool shocking, it's better to vacuum the pool before you shock the water. A good scrubbing and vacuuming of the pool walls and floor will ensure that dirt and debris that can affect the water chemistry is removed before the chlorine is added.

Will baking soda clear a cloudy pool?

Baking soda can work wonders in a pool. Baking soda can: Help to clear cloudy water and restore the sparkle. Spot-treat algae.

Will baking soda clear a green pool?

Will baking soda clear a green pool? No. Baking soda will only raise your alkalinity and pH levels and this will not kill algae. Chlorine is what kills algae.

Should I backwash after shocking pool?

Steps for Preventing Algae

If your pool is used frequently, shock it at least once a week. Clean or backwash your filter regularly. Run your pool pump for at least 10 hours per day to completely circulate the water. Keep your phosphate levels below 100 ppb (parts per billion).

Can you swim in a cloudy pool after shocking?

Wait until the chlorine level in the water drops down to 1-4 parts per million (ppm) before allowing swimmers back into the pool. If the water still looks a little cloudy after the shock treatment, you may want to use a water clarifier before allowing swimmers back into the pool.

Should you shock pool before or after rain?

Give your pool a good shock treatment 1 to 2 days before the storm hits. You can bring the chlorine level up pretty high to prolong the pool being depleted of chlorine.

Does Shocking a pool lower alkalinity?

Another cause for high alkalinity can be when you shock the pool. While this is performed to quickly rid the pool of pollutants, chlorine-based pool shock is highly alkaline, and can raise the water's total alkalinity level in the process.

How can I make my pool water clear naturally?

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity.