What does red light on Reolink camera mean?

Red solid HDD light: The NVR has detected the HDD but not recording. Red blinking HDD light: The cameras connected to the NVR are recording to the HDD.

What does blue light mean on Reolink camera?

Note: The solid blue light means that the camera is connected to WiFi; The blinking blue light means that the camera is disconnected from WiFi. When the camera couldn't get power supply, the light will stay off.

Why won't my Reolink camera connect?

Click Add Device->Scan in LAN to see whether the camera shows up. For the mobile app, please check whether it has a firewall or APN settings, and disable the APN to add again. If still fail to add, please try to reboot this camera and your home router network or hard reset this camera and set up from factory status.

Why does live viewing fail on Reolink?

Solution: If you can't see live stream image on all devices such as the mobile app, iPad, client and web browser, and the Bitrate under the Performance page is 0Kbps( reference for IP cameras, the battery camera doesn't have such setting), then it should be the hardware defect of the camera.

Is Reolink always recording?

Applies to: All Reolink cameras except battery-powered cameras. When you set the camera to continuously record, the camera will keep recording all the time, no matter it detects motions or it doesn't detect motions. All the Reolink cameras except battery-powered cameras can record continuously to Reolink NVR.

Watch BEFORE you buy Reolink security cameras.

How do I know if Reolink is recording?

Log in to your security camera software

For example, you can turn on your monitor to see whether your IP security camera is recording videotape. If the footage is showing up correctly, the IP security camera is on. If not, it would be either the cable or the camera issue.

Can a Reolink record 24 7?

You can set up the recording now, such as 24/7 recording, or motion detection recording (which means only when the cameras detect a moving action will the recording begin).

How do I get my Reolink camera back online?

How do you reboot Reolink camera?

Why is my Reolink not playing back?

Please switch to the Fluent (low) resolution on the playback page. Check if you cannot playback on both Reolink APP and Client. Switch to another wifi/ mobile data on your phone and computer.

Why is camera not working?

Step 1: Long-tap on the Camera app icon and open the app info menu. Step 2: Go to Storage & cache menu. Step 3: Tap on Clear cache and you are all set to use a working Camera app on Android.

Why did my security camera stop working?

At times when the security camera's lights don't work at night is due to poor cable connections. Make sure to check that all connections, cables, and power is intact and tightly connected. If your security cameras are wireless, check the internet and make sure that it is connected successfully to the WiFi.

Why won't my security camera connect to my WiFi?

Make Sure the Wireless IP Camera Is Powered on. Check if the power supply of the wireless IP camera is working properly. Make sure the power adapter is plugged into a working socket. If you get a battery powered wireless IP camera, check if the battery is still at work.

Why is my Reolink blinking red?

Red solid HDD light: The NVR has detected the HDD but not recording. Red blinking HDD light: The cameras connected to the NVR are recording to the HDD.

What does red and blue light on Blink camera mean?

A blinking blue light indicates that the camera has lost connection to the Internet and is trying to reconnect. A red light indicates that the camera has been factory reset and is in pairing mode.

How do I turn off the red flashing light on my camera?

Insert Fresh Batteries

Now it starts recording until blue light goes out and turns flashing red. You will see the device blink solid red light for a certain period and then disappear suddenly.

Can I reset my Reolink camera remotely?

Reolink camera/NVR can't be switched off remotely, but you can restore/reboot the camera/NVR remotely when you can still connect it.

Why is my security camera offline?

There are several reasons why your camera may be offline, including a depleted battery, high bandwidth usage, updated router settings, or wireless interference. The camera is designed to automatically re-connect once there is internet available.

Why do my IP cameras keep going offline?

Security cameras go offline for three main reasons: power outages, loss of internet, or failure of the camera's components (broken parts or wires). Knowing some quick troubleshooting tips will help you get your camera back up and running in no-time.

How do I make a Reolink record continuously?

What does continuous recording mean?

Types of Security Cameras: Motion Detecting and Continuous Recording. There are two types of cameras offered on the market for security systems. There are continuously recording cameras, which record 24/7 every day of the week, and there are motion detection cameras that record only when it detects motion.

Are security cameras always recording?

Most home security cameras are motion-activated and will record when they detect motion, as well as send you an alert. Some can record 24/7, which is known as continuous video recording (CVR). A security camera is an excellent tool for providing home security and the peace of mind that goes with it.