What does NSF mean on grease?

Since 1998, when the National Sanitation Foundation (NSF) took over the H1 lubricant standard from the U.S. Department of Agriculture (USDA), concerns about food safety have only increased.
Takedown request   |   View complete answer on food-safety.com


What is NSF grease?

Infographic - Potable Water Lubricants

It is an odorless grease that provides excellent water and oxidative resistance over a broad temperature range. It was designed for sealing, damping, and lubricating potable water applications, such as faucets, plumbing, water filters, and pumps, amongst others.
Takedown request   |   View complete answer on nyelubricants.com


Is NSF a food grade?

Ensuring accountability from farm to fork, the NSF is known as “The Most Trusted Name in Food Safety™.” Today, the NSF mark is the only certification that identifies food safe chemicals.
Takedown request   |   View complete answer on bradley-systems.com


What grease is food safe?

H3 lubricants are additives that can be used in the formulation of food-grade products. H3 lubricants are often “edible oils,” and are safe for human consumption such as corn oil, sunflower oil, soybean oil, or cottonseed oil.
Takedown request   |   View complete answer on sclubricants.com


What is a good food grade lubricant?

H1 Silicone Spray is a great H1 food grade silicone-based aerosol spray for use on machine parts and equipment in locations in which there is potential exposure of the lubricated part to food. Available in an aerosol can.
Takedown request   |   View complete answer on lelubricants.com


How To Apply And Use An NSF 3H Lubricant!



Is NSF H2 food grade?

H2 products use the same standard ingredients as all other modern industrial lubes and are not food-grade at all.
Takedown request   |   View complete answer on lubesngreases.com


Does food grade grease expire?

Normal Shelf Life: In general, the recommended shelf life for oils and greases is typically five years when stored properly in the original sealed containers.
Takedown request   |   View complete answer on mobil.com


What is NSF 3H?

Product Description. FOOD GRADE GREASE 3H is a non-toxic lubricant designed for optimum lubrication and protection of seals, guides, bearings, blades, and other machinery operating in Food & Pharmaceutical environments where direct food contact is inevitable.
Takedown request   |   View complete answer on brit-lube.co.uk


What is H1 food grade grease?

Synthetic Food Grade Grease H-1 is a full synthetic, extreme pressure, anti-wear, high temperature, bentone-based grease designed for food, feed and pharmaceutical processing and packaging equipment subjected to high loads and high moisture.
Takedown request   |   View complete answer on schaefferoil.com


What is food grade grease made out of?

H1 lubricants are classified as food-grade lubricants. Made of refined synthetic oils, USP white oil and/or vegetable stocks, they are edible, safe and nontoxic. If these food-grade lubricants fall into food or beverages on the processing line, the lubricants won't affect the taste, smell or color of the products.
Takedown request   |   View complete answer on profoodworld.com


What does NSF mean in cooking?

What is NSF? NSF International (formerly the National Sanitation Foundation) is a third-party company that does a complete check of various foodservice equipment and supplies to ensure they meet or exceed NSF's standards for cleanability, sanitation, and food protection.
Takedown request   |   View complete answer on shopatdean.com


Is NSF better than FDA?

In the United States, the most recognized and frequently encountered food safety agency is the FDA. NSF International is the most recognized food safety standards organization.
Takedown request   |   View complete answer on industrialspec.com


Is NSF reliable?

Independently Credible

In many cases, NSF standards are so trusted that health codes accept them, or even defer to them. In fact, the way NSF standards are created is through a process involving industry experts, health departments and other interested parties that are a part of an NSF Joint Committee.
Takedown request   |   View complete answer on blog.orendatech.com


What is NSF listing?

Products that earn NSF certification are said to be “NSF certified” or “NSF listed” and display the applicable NSF certification mark to show that they have been tested by one of today's most respected independent product testing organizations.
Takedown request   |   View complete answer on nsf.org


What is NLGI grade for grease?

The NLGI number is a measure of the grease's consistency as indicated by its worked penetration value. The penetration test measures how deep a standard cone falls into a grease sample in the tenths of millimeters. Each NLGI grade corresponds to a specific worked penetration value range.
Takedown request   |   View complete answer on nyelubricants.com


What does NSF H2 mean?

H2 — lubricants with no food contact

Substances that are categorically unacceptable for such use are listed among the substances in Part 5.1 of NSF guidelines. There may be other substances that are not acceptable because of unfavourable toxicology or other considerations.
Takedown request   |   View complete answer on foodprocessing.com.au


What is NSF Category P1?

A product's intended end use determines which category code it falls under and the regulatory requirements under which it is reviewed in NSF's nonfood compounds program. If a product doesn't fall under one of the existing category codes, it is given a P1 designation.
Takedown request   |   View complete answer on linkedin.com


What is H2 grease?

H2 lubricants are food-grade lubricants used on equipment and machine parts in locations where there is no possibility of contact. H3 lubricants are food-grade lubricants, typically edible oils, used to prevent rust on hooks, trolleys and similar equipment.
Takedown request   |   View complete answer on machinerylubrication.com


What is a 3H lubricant?

3H lubricants are direct contact release agents that are applied to moulds, grills, or other equipment in order to prevent food from sticking to the machinery during processing. These products must comply with 21 CFR, Section 172.878 as well as with NSF's regulations.
Takedown request   |   View complete answer on foodsafelubes.com.au


Is Vaseline a food grade?

Viscous lubricant and preservative. Vaseline can be processed as grease with the lubricating properties of oil. In view of the unique formula, suitable for use in the food industry, in accordance with NSF registration H1, number 139225.
Takedown request   |   View complete answer on motip.com


What is the shelf life of bearing grease?

Lubricant deteriorates over time as a result of ageing, condensation, and separation of the oil and thickener. Therefore, sealed bearings should not be stored for more than three years.
Takedown request   |   View complete answer on skf.com


Is wd40 Food Safe?

Ingestion: This product has low oral toxicity. Swallowing may cause gastrointestinal irritation, nausea, vomiting and diarrhea. This product is an aspiration hazard. If swallowed, can enter the lungs and may cause chemical pneumonitis, severe lung damage and death.
Takedown request   |   View complete answer on thefiltery.com


How long is bearing grease Good For?

Closed Bearings

“Lubricant deteriorates over time as a result of aging, condensation, and separation of the oil and thickener. For closed bearings – sealed or shielded – that contain the standard domestic grease (GJN), and that are still in their original, unbroken packaging, the recommended shelf life is five years.
Takedown request   |   View complete answer on bearingtips.com


What is silicone grease made of?

Silicone grease, sometimes called dielectric grease, is a waterproof grease made by combining a silicone oil with a thickener. Most commonly, the silicone oil is polydimethylsiloxane (PDMS) and the thickener is amorphous fumed silica.
Takedown request   |   View complete answer on en.wikipedia.org
Previous question
What causes lips to thin?