What does CQ mean in ham radio?

Morse Code (CW)+ The best way to start with CW is to tune around until you hear someone calling CQ. CQ means, “I wish to contact any amateur station.” When answering a CQer you should zero beat the other ham's frequency. That means setting your transmit frequency as close to theirs as possible.

What does CQ mean shortwave?

—used at the beginning of messages of general information or safety notices or by shortwave amateurs as an invitation to talk to other shortwave amateurs. CQ. abbreviation. Definition of CQ (Entry 2 of 2) 1 charge of quarters.

How do you answer a CQ call?

How to answer a CQ: First, use the callsign of the station you're calling. Follow that by your own callsign, and your approximate whereabouts. If the station you're calling is very strong, just once will do. If he's very weak, you might double up the call.

What frequency do you call CQ?

The conventional wisdom in amateur radio is that we should not call CQ when using FM on the VHF and UHF bands, especially on repeaters.

Is it OK to call CQ on a repeater?

If the repeater is not in use, simply stating your callsign followed by "listening" or "monitoring" implies that you are listening to the repeater and are interested in having a QSO with anyone else. Calling CQ on a repeater is generally not common, a simple "N3XYZ listening" will suffice.

Ham Radio Education, Calling CQ CQ On The Airwaves!

Why do hams say 73?

73 is an old telegraph code that means "best regards". 73, as well as 88 (which means "hugs and kisses") are part of the language of ham radio.

What does QSO mean in ham?

Ham Radio operators still make liberal use of them today. A QSO is another word for “contact,” as in “I made 783 QSOs during Field Day last year!” or “Making QSOs with European stations was difficult during the contest.” Many Hams enjoy keeping a record of stations they've made QSOs with by writing them in a log book.

What does QRZ mean in ham radio?

QRZ, the name of the web site, is the "Q" amateur radio code for "Who is calling me?" and corresponds to the site's purpose of assisting amateur radio operators with the lookup of ham radio call signs from every country in the world.

What does 7 dots mean in Morse code?

A dash is equal to three dots. The space between elements which form the same letter is equal to one dot. The space between two letters is equal to three dots. The space between two words is equal to seven dots.

What does 33 mean in Morse code?

Dit-Dah Message for 33

Note: Dots at the end of the word are denoted as dit, at any other place in the word as di, and dashes are denoted as dah.

What is QTH in radio?

(radio slang, question) What is your position in latitude and longitude (or according to any other indication)?

What is the difference between QSO and QSL?

QSL = the DXCC entity of the station confirmed in the QSO. If there is no information in the QSL box then the QSO is not confirmed. In the matrix above the QSO with WA0EIR is not confirmed. The QSO with KK4FYV is confirmed because United States of America is displayed in the QSL box.

How do you call a specific person on ham radio?

If you want to talk to a certain person, call their using their call sign once or twice, then your call sign. In an emergency, give your call and say "emergency" rather than using "Break Break". repeater system, the repeater has a timer so that it can ID every 10 minutes.

How do you say thank you in ham radio?

TNX: Thanks - this ham radio abbreviation is widely used for Morse / CW transmissions.

What in ham lingo is a lid?

“Lid” is ham-speak to denote a poor operator; one who is inept at the practice of the radio amateur art. It is someone with very poor operating technique, a newbie or an experienced ham that acts like a neophyte. This old term likely originated from the days of wired telegraphy.

What does QSL mean in radio?

The term “QSL” comes from the international Q code and means “I confirm receipt of your transmission”. A QSL card is therefore a written confirmation. The sending of QSL cards dates back to the 1920s when AM radio broadcasts were still a novelty and stations wanted to know how far away they were being received.

How do you tell if you hit a repeater?

The simple answer is to transmit on the repeater's input frequency, saying something like " < your callsign > testing" and listen for the repeater's courtesy beep (assuming there is one) on its output. If you've heard the beep, then you've hit the repeater.

What does full quieting mean?

full quieting — a received signal that contains no noise.

What is Qrx?

Symbol. QRX. (radio slang, question) When will you call me again? (radio slang, statement) I will call you again at ... (

What is a radio Q code?

The Q-code is a standardised collection of three-letter codes that each start with the letter "Q". It is an operating signal initially developed for commercial radiotelegraph communication and later adopted by other radio services, especially amateur radio.

What do 3 dots mean in Morse code?

Three Dots and a Dash is the Morse code for V, which. stands for victory.

What does Old Man mean in Morse code?

These include prosigns, Q codes, and a set of Morse code abbreviations for typical message components. For example, CQ is broadcast to be interpreted as "seek you" (I'd like to converse with anyone who can hear my signal). OM (old man), YL (young lady) and XYL ("ex-young lady" – wife) are common abbreviations.