What does blinking green light mean on Invisible Fence?

When you first insert the battery into your receiver, the status light will flash green. This indicates that the receiver has started properly. In the event that the lights do not flash, check the battery to be sure that it has been inserted properly.

How do I know if my invisible fence is working?

Some invisible pet fences include a battery tester with the fence system. Place this on the collar and walk past the boundary wire. If the tester lights up and you hear the audible warning given by the collar, the battery is functioning properly. If you hear the warning, but no light flashes, replace the battery.

Why is my petsafe collar flashing green?

The receiver collar will emit a unique double tone as the contact points touch your pet's skin. You will know that you have the proper fit when you hear the receiver collar emit the double tone and it flashes green 5 consecutive times.

How do I reset my Invisible Fence transmitter?

Plug in the transmitter. The system and transmitter should reset automatically upon being plugged back in. Wait for a few seconds and look for any abnormality in the lights.

What does flashing red light mean on invisible fence collar?

Troubleshooting Questions. Why is my Invisible Fence collar blinking red? If you have started to see a red flashing light on your pet's Computer Collar unit, your Power Cap battery may need to be replaced. You can order replacement batteries online, from your local dealer, or by calling 1-800-824-3647.

Testing Your Invisible Fence for Spring

How often does an Invisible Fence collar blink?

Once the receiver detects that the battery has reached a low voltage level, the status light will change from the normal blinking “green” every 30 seconds to blinking “red” every 10 seconds.

How do I check the battery in my Invisible Fence collar?

You can position the test light tool on the collar probe and look for the light to flash. The higher the correction level, the brighter the light will shine on the test light tool. If the collar beeps once you reach the boundary, or the test light illuminates, the battery and the collar work.

How do I know if my petsafe transmitter is bad?

Touch both points on the collar while it is ticking or beeping. If you do not feel a shock, then there may be a problem with the receiver collar. Make sure you touch both points on the receiver at the same time when you hear the collar beeping. It will tell you definitively that the fence is or is not working.

What does it mean when your Invisible Fence beeps?

If your Invisible Fence control panel is beeping with a lengthy pause between each beep, it's possible your backup battery unit needs to be replaced. Your fence will still work, but if your power goes out, the system will no longer be operational until power is restored.

What does blinking light mean on PetSafe collar?

During normal operation, the Receiver Collar Indicator Light will flash for the first 30 seconds after a battery is installed or the receiver is turned on to indicate the battery status as shown in the table below.

How do I reset my PetSafe wireless fence?

Make sure the collar is powered on. Press and hold the button on the collar until a beep is heard and the light flashes green to turn the collar on. Press and hold the power button for 10 seconds to reset the collar. The light turns red and the collar turns off.

How long do PetSafe batteries last?

Keep all of your pet's essential electronics working their best with PetSafe RFA-67 6 Volt Replacement Batteries. The 2-count pack of 6 volt batteries can provide up to 6 months of power (each battery can last 1-3 months with proper use). The patented design makes them easy to install and use.

Why is my underground fence not working?

Check for a break in the underground wiring of the invisible fence. Most invisible fence units register an error if there is a break in the fence. It should either flash red lights or set off an alarm. Remove the ends of the fence wire from the transmitter jacks and replace them with the ends of a spare piece of wire.

How do you test an electric dog fence?

Touch both points on the collar while it is ticking or beeping. If you do not feel a shock, then there may be a problem with the receiver collar. Make sure you touch both points on the receiver at the same time when you hear the collar beeping. It will tell you definitively that the fence is or is not working.

Why is my dog watch fence beeping?

Is Your Transmitter Beeping? If the boundary loop wire is broken or the signal is interrupted, an audible warning will sound. You should check around your property for a visible wire break. Contact your local DogWatch Dealer for troubleshooting tips or to schedule a service call.

Does Invisible Fence have a battery backup?

An Invisible Fence® Brand Power Cap Battery is the easiest way to ensure they stay safe. Other batteries do not fit properly and can allow water into your pet's Computer Collar® Unit. Even the best trained pets are susceptible to outside distractions, but a fresh Power Cap® Battery keeps them within their boundary.

Can Invisible Fence interfere with WiFi?

However, if you use an invisible boundary to cover your entire yard and your home WiFi is on the other side of the house, then you might experience some issues because the dog fence signal can interfere with WiFi.

Does Invisible Fence have to be a closed loop?

Yes, in order for the invisible fence to work, it needs to be a completely closed loop. There are a few other variables to watch out for, too. One of the first things you should do when installing an invisible fence is to mark out where your utility lines are located.

Why is my wireless dog fence not working?

Batteries are out.

This one is obvious. If there is no working battery inside the collar, the receiver will not work and it won't deliver a static correction. Always keep a spare, loaded battery around the house.

Why is my PetSafe wireless fence not working?

The light may come on and fade out. Place the battery back into the collar and twist to lock. Confirm that the collar powers on. If the collar does not power on, replace the battery with a new RFA-67 battery.

Why does my PetSafe transmitter keeps beeping?

Why does my PetSafe wireless transmitter keeps beeping? If the transmitter still beeps / no loop light on Short Loop Test, please contact our Customer Care Center to discuss having unit replaced. If the transmitter is functioning properly on the Short Loop Test, you have a break in your boundary wire.

How do I increase the voltage of my Invisible Fence?