What does Avrdude command do in assembly program Mcq?

Explanation: Avrdude is the name of the software that is used by the Arduino IDE to upload the hex files to the AVR Based microcontrollers.

What is the role of Avrdude Mcq?

After that process is done, the avrdude software has the job of uploading the hex file to the microcontroller, more specifically the AVR Microcontroller family.

What is the use of the MOSI and MISO pins Mcq?

What is the use of the MOSI and MISO pins? Calrification: The MOSI and MISO pins are a part of the SPI (Serial Peripheral Interface) for transferring data over short distances. It is a form of Synchronous Serial Communication.

What language is the Arduino IDE built on Mcq?

What language is the Arduino IDE built on? Explanation: The Arduino code is primarily a subset of the C++ programming language. However, the IDE (Integrated Development Environment) was written in the Java programming language.

Which Arduino boards use the Atmega2560 Mcq?

Explanation: Both the Arduino Mega and the Arduino Mega ADK use the Atmega2560, however the only difference between the two boards is that the Arduino Mega ADK was specifically built with Android phones in mind and has a USB to host connector that can plug into your android smartphone.

Logical

Which Arduino boards use the ATmega2560?

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

What is an Arduino Uno Mcq?

Arduino is an electronics platform that is open source and based on easy-to-use hardware/software. Arduino provides a programmable board that can read input and gives output to the outer environment.

What is the purpose of using Arduino IDE?

The Arduino Integrated Development Environment - or Arduino Software (IDE) - contains a text editor for writing code, a message area, a text console, a toolbar with buttons for common functions and a series of menus. It connects to the Arduino hardware to upload programs and communicate with them.

Where does the Arduino store its program sketch Mcq?

Explanation: Sketches are saved on the development computer as text files with the file extension . ino. Arduino software (IDE) pre-1.0 saved sketches with the extension file .

What is the full form of IDE in Arduino IDE IoT software Mcq?

Explanation: The full form of IDE in Arduino IDE IoT software is Integrated Development Environment.

What is the use of MOSI and MISO pins?

MOSI and MISO are master out slave in and master in slave out terminal s used in spi interface. The MOSI pin sends bits from master (another MCU) to the slave. The MISO pin is used to send bits from slave to master.

What is the use of MOSI and MISO?

MOSI—Master Output Slave Input—transmits data from the master to a slave, while MISO—Master Input Slave Output—transmits data from the slave to the master. 3. While the master generates a single clock, MOSI and MISO pins can transmit at the same time when necessary, allowing for full-duplex operation.

What are the functions of the SDA and SCL pins of the Arduino Uno Mcq?

Explanation: The SDA and the SCL pins on the Arduino UNO are used for communicating through the I2C protocol. They are supported by the Wire Library in the Arduino IDE which supports the 7-bit addressing mode.

What is USBasp programmer?

USBasp is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed, and that makes it low cost USB programmer. Important features are: Works under multiple platforms.

What does IoT mean to Mcq?

Answer: B. Explanation: IoT stands for Internet of Things, which means accessing and controlling daily usable equipments and devices using Internet.

What does GP IO stand for MCQ?

General Purpose Input/Output.

Which command is called when program starts in Arduino?

A function is a series of programming statements that can be called by name. Which command is called once when the program starts: loop() setup() (output)

Which of the following statement is true about Arduino Mcq?

Arduino. Arduino IDE uses a simplified version of C++, making it easier to learn to program. Arduino provides a standard form factor that breaks the functions of the micro-controller into a more accessible package.

Which function command is called once Arduino starts?

The above question asked about the command which is called ones when the program will starts. The command is a setup() function which is used in ardino programming.

What is microcontroller used in Arduino Uno?

Arduino Uno is a microcontroller board based on the ATmega328P (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button.

Why Arduino Uno is important?

It can be programmed to control the way buttons, motors, switches, lights, and other electronic parts work together. Arduino is hands-on, which is one of the many reasons it's appealing to kids. It can be plugged into your computer. You can write a program on the computer and send it to the Arduino.

Is Arduino and Arduino IDE same?

All Arduino boards have one thing in common: they are programmed through the Arduino IDE. This is the software that allows you to write and upload code.

What is Arduino Uno in IOT?

Arduino Uno is an open-source microcontroller board developed by Arduino.cc. It is based on the Microchip ATmega328P microcontroller. It is one of the most popular Arduino development board and is universally known as 'stock Arduino'. It is a small development board having size 2.7 in * 2.1 in.

How many digital pins are there in the Uno board *?

What are they? 11. How many digital pins are there in the UNO board? 12.

Which Arduino board contains an onboard joystick Mcq?

Which Arduino Board contains an onboard joystick? Explanation: The Arduino Esplora comes with the Atmega32u4 and is based on the Leonardo Hardware. It comes preinstalled with a lot of things including a joystick, buttons, TFT Connector for attaching to external LCD's, an RGB LED, etc.