What does 4.10 6 mean on a tire?

You will see 4.10/3.50-6 on the tire. This means the tire is 4.1” in width, 3.5” in tire height (rim to outer edge) with a 6” rim height.

What does 4.00 6 mean on a tire?

The two most common sizes are 4.00 – 6 and 4.10 – 6. The first number is the height of the tire sidewall, and the second number is the rim diameter. To get the overall diameter you need to do some math! 6 (rim diameter) + 4.00 (sidewall height) X 2 = 14 inches total diameter.

How tall is a 4.10 tire?

So a 4.10/3.50-4 tyre is 4.1" wide, 3.5" tall on the sidewall and fits a 4" rim. This tyre would therefore have the appearance of a low profile tyre.

What does 4.00 mean on a tire?

4″ = refers to the diameter of the rim, in inches

For example, a 4.80/4.00-8″ tire typically has a 15.5″ diameter rather than the 16″ diameter you would expect.

What does 4.80 8 mean on a tire?

Two-number Tire Sizing

Lawn tractor tires using the two-number system display numbers as 4.80-8, for example. This means the tire's width is approximately 4.8 inches and the rim is 8 inches in diameter. Those are the only two numbers you need to find the right size replacement tire.

How to Read a Tire Size

What does 4.80 12 mean on a tire?

Yes, a 4.80-12 trailer tire uses a 12 inch diameter wheel that is 4 inches wide. The 4.80 spec is the width of the tire. I have attached a link to all of our 12 inch x 4 inch trailer wheels for you to check out. They come with either a 4 on 4 inch bolt pattern or a 5 on 4-1/2 inch bolt pattern.

What does 99Y mean on a tire?

Similarly, the size 285/35ZR19 99Y indicates a maximum speed capability of over 149 mph, while the Y in the service description specifies a maximum speed of 186 mph. The most recent change is to enclose the Y-speed rating indicated in a service description in parentheses, such as 285/35ZR19 (99Y).

What does the W stand for on tires?

The letter W denotes the maximum speed rating, which translates 168 mph—not something intended for mom's minivan. See our list of speed ratings below, which range from a low of "L" (just 75 mph for some off-road tires) to a high of Y (186 mph).

What is a 4.10 tire?

Often referred to as a 10 inch tire, this tire is one of the most common found on hand trucks, pressure washers, leaf blowers, air compressors, generators, garden carts and nursery carts. Also See: Understanding Tire Sizes.

What does 4PR mean on tires?

And this is how you read it: 3.00 = section width (inches) H = speed rating (see Speed Rating Chart ) 16 = rim diameter (inches) 4PR = ply rating.

What size is a 3.00 4 tire?

Product Description. 3.00-4 scooter tires are also commonly referred to as 10"x3" or 260x85 tires.

What do the three numbers on a tire stand for?

B: TIRE WIDTH The three-digit number following the letter is the tire's width (from side to side, looking at the tire head on) in millimeters. This may also be referred to as the section width. C: ASPECT RATIO The forward slash separates the tire width number from the two-digit aspect ratio.

What is the difference between 95Y and 99Y?

The difference between 95Y and 99Y is the load rating of the tires. Presumably you can haul more stuff down the autobahn without blowing the tire if it's a 99Y. Michelin PSS are a bit wider than most for the same tire size.

What speed rating is W?

A relatively new addition to the speed rating chart, tires with speed rating “W” can achieve a maximum sustained speed of 168 mph (270 kph).

Can I use W rated tires instead of V?

V means that vehicles can safely use the tire with a top speed higher than 149mph. The rating W shows that the tire is safe to use for a vehicle with a top speed of 168mph.

What is the difference between a 4.8 and a 5.3 tire?

A 4.80-12 tire will be 20.5 inches in diameter whereas a 5.30-12 tire will be 21.9 inches. You would need to make sure that the is more than 3/4 of an inch above the 4.80-12 tire to be able to use a 5.30-12. The smaller 4.80-12 is 4.9 inches wide. The 5.30-12 is 5.6 inches wide.

Will a 5.3 tire fit a 4.8 rim?

Will the wheel for a 4.8 /12 tire fit a 5.3 /12 tire, wanting a wider tire but do not want to purchase new wheels. Expert Reply: Yes, the 4.80-12 tire size and the 5.30-12 tire size are both designed to fit the same rim width of 4 inches.

How fast can you pull a trailer with 13 inch tires?

13 inch trailer wheel/tires like the size 185/80-13 like part # AM1ST79 are rated for up to 81 MPH. Most trailer tires are only rated for 65, so if 65 is the limit you have then you'd be good.

How do you read trailer tire sizes?

Sizes 12 inch and smaller are generally listed by a two number size, such as 4.80-8 or 5.70-12. The first number in this size is the width of the tread, the second number is the size of the rim that it mounts on. Large size trailer tires are made up of three numbers.

How wide is a 145 tire?

145/65R15 tires have a diameter of 22.4", a section width of 5.7", and a wheel diameter of 15". The circumference is 70.4" and they have 900 revolutions per mile. Generally they are approved to be mounted on 4-5" wide wheels.

How do you read a quad tyre size?

The first number represents the overall height when mounted and inflated to the proper air pressure. The second number represents the overall width when mounted and inflated to proper air pressure. The third number represents the diameter of the wheel this tire will mount on.