What does 112t mean on tires?

Though not an absolute, the general rule is: The higher the speed rating, the better the tires will corner and stop, the faster they'll wear out, and the more they'll cost. Common speed ratings on tires are as follows: R=106 (mph) S = 112, T = 118, H = 130, V = 149, W = 169 and Y = 186.

What ply tire is 112T?

245/75R17 Bridgestone Dueler A/T RH-S 112T SL/4 Ply BSW Tire.

What does the T or H mean on tires?

The “T” or “H” on tires pertain to their speed ratings. A T-rated tire can withstand top speeds of up to 118 mph (190 km/h), while an H-rated tire can support up to 130 mph (210 km/h). It is important to note these markings and stay within those speed limits.

What does the T stand for on a tire?

A "P" stands for p-metric, which is a tire used primarily on passenger cars. An "LT" indicates a light-truck tire. A "T" means it's a temporary spare. Some tires get a "Z" or an "F" attached to the radial indicator, denoting a Z-rated tire (see service description below) or a run-flat tire.

What is speed rating H?

SPEED RATING H

If you recall from earlier, the “H” speed rating doesn't appear after “G” but between “U” and “V.” It represents a maximum speed of 130 mph (210 kph) and is commonly found on sports sedans and coupes.

Tire Basics: Sidewall meaning, speed ratings, load ratings, tire sizes Talking Tires

Are H rated tires good?

H-Rated Tires: This is a perfect, average tire for most sedans and commuter vehicles. It might not seem to fit in our chart, but the tire speed rating “H” is rated for up to 130 mph. T-Rated Tires: This tire is often recommended for family sedans and vans. It's rated for up to 118 mph.

Should I buy H or V rated tires?

If you feel the need to drive at or above 130 mph then you should get a “V” speed rated set of tires. If you don't plan on driving that fast, then an “H” speed rated set is the better option.

Are a T tires good in snow?

All terrain tires do not perform very well in snow and ice.

Even though snow tires and all terrain tires have a similar looking tread, the difference in pattern and rubber compound makes a huge difference.

What does 92w mean on a tire?

The 92 represents the maximum load the car can carry. The range of load ratings is vast and each number corresponds to a chart that shows how many pounds a single tire can carry. In this case, the 92 means it can support 1,389 pounds.

Can you mix T and H rated tires?

Just remember, never mix and match tires with different speed ratings on your vehicle. This will cause major problems with the handling of your vehicle. If tires of different speed ratings are mounted on a vehicle, the lower speed-rated tires should be placed on the front axle, regardless of which axle is driven.

What is load range H?

From a G to an H

Truck tires typically come in two load ratings: G and H. Load range G is a 14-ply configuration, while load range H tires have 16 plies. The heavier-rated tire will usually add between 700 pounds and 1,000 pounds more load-bearing capacity per tire (see "How Much is Too Much," next page).

What does H mean in wheels?

it means helicopter. like, you get 36 helicopter stickers.

Which is better 6 ply or 8 ply tires?

Actually the 6 ply will last longer than the 8 ply. The reason is the extra size of the body plies in a trailer tire will actually produce more heat while rolling than a 6 ply rated tire. I definately recommend radila and not bias ply construction. Radial tires wear much better.

What is the best tire speed rating?

As manufacturers developed bigger and better tires, it became necessary to regulate performance at standardized speeds to ensure safety. The "Limited V" category of 250 km/h (149 mph) was then created, and eventually the "Z" speed rating was added as the top speed rating.

What does 108t mean on a tire?

Load index is the next number, 108 in our example. The maximum load this tire can carry is 2,205 pounds (1,000 kg). The higher the load index, the more weight it will take.

What is a good speed rating for tires?

A Y-speed rating on the tire is an indication that it is safe to use the tire for a vehicle with a top speed of 186mph, while (Y)-speed rating specifies that the tire is perfect for a vehicle with a top speed of 186mph.

Do all-terrain tires waste more gas?

Consequently, all terrain tires have a greater rolling resistance than their pavement-bound counterparts. They also have a larger effect on fuel economy. The consensus is that on average, all-terrain tires decrease fuel economy by about 3% compared to highway tires.

How long do a T tires last?

The average life of all-terrain tires is about 40,000 miles compared to 60,000 on your highway driver. Two main factors determine the lifespan of a tire: the tread pattern and rubber compound. Of course, cheaply made highway tires will wear quicker than high-quality all-terrains.

Are all-terrain tires good for highway driving?

Models at fall under this type of tire have a combination of open-tread designed for both off-roading and handling on paved streets. The most important thing to keep in mind with all-terrain tires is they are meant for multiple purposes. So, if you only drive on paved roads and highways, this is not a good option.

Can I use W rated tires instead of V?

V means that vehicles can safely use the tire with a top speed higher than 149mph. The rating W shows that the tire is safe to use for a vehicle with a top speed of 168mph.

What is the difference between AT and HT tires?

AT tyres have a deeper and more aggressive tread than HT tyres. This provides greater grip in off-road conditions. Generally speaking, the stronger, thicker sidewalls of an AT tyre make them less likely to suffer damage caused by common hazards encountered off-road, such as rocks, ruts and tree roots.

What does 92h mean on a tire?

“H” represents the speed rating, which is how fast the tires can go based on their load capacity. This rating ranges from A – Z. “H” indicates a speed rating of up to 130 mph.