What do you put under subfloor?

Underlayment, or “padding” as it's often called, is the spongy, closed-cell plastic foam sheet that comes in rolls. It is rolled out between the actual laminate flooring planks and the subfloor.

What goes between floor and subfloor?

Purpose of the Underlayment

Flooring underlayment is a thin material that rests between the floor covering above and the subfloor below. Because underlayment is a catchall term, it can take different forms depending on the flooring material is supports.

Do you need underlayment for subfloor?

Underlayment for laminate flooring is a must. Since laminate is a floating floor, it must be evenly distributed across your subfloor. Underlayment is what allows the floor to float, gives it stability, support, noise reduction, and supports the locking systems in between planks to assure the sturdiest flooring project.

What is under the subfloor?

Underlayment

The underlayment material is installed below the floor covering and placed on top of a subfloor. Under the visible covering, there is a layer made of soft or foam-like materials with a thickness of between 1/4 – 1/2-inch.

What is the best subfloor material?

Plywood. Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

How To Get Under Your Floor | Subfloor Series Part 2 of 5

What is the difference between underlayment and subfloor?

Basically, subfloors are a structural part of your home that provide strength and rigidity to your home's flooring. Underlays, on the other hand, protect your floor covering from moisture, help soundproof your floor, and offer cushioning and comfort underfoot. You can think of your floor like a sandwich cookie.

Do I need a moisture barrier on wood subfloor?

Do I need a vapor barrier for hardwood floors?" The answer is YES! Moisture can destroy hardwood flooring. It causes cupping, warping, and even mildew if not treated. You must install a moisture barrier to protect your flooring from water wicking up from below.

What kind of underlayment do I need?

The normal choice is a thin foam pad material made of polyethylene or polypropylene, which rolls out in sheets. Plywood subfloors: A breathable foam-type underlayment is generally used when installing laminate flooring over plywood or OSB subfloors.

Do I need 2 layers of subfloor?

That's the usual approach. Almost no one puts down double-thick subfloor in residential applications (for cost and handling reasons), and both layers need to be fastened to joists. Only thin underlayment can be fastened just to the subfloor.

Does subfloor go over plywood?

Install a layer of at least ½” or preferably 5/8” ply over the existing planks. This is particularly important if your old sub floor has lumps and bumps in it. If you don't respect this thickness of ply, then you're highly likely to see rises and falls in your new flooring.

Is OSB good for subfloor?

Some builders prefer OSB over plywood for flooring because the surface, when new, is always clean, flat, and knot-free. Since OSB is so dense, it's a good soundproofing product. OSB is a more consistent product than plywood or other types of material for subfloor: every sheet is the same.

Is it better to screw or nail subfloor?

Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.

How thick should my subfloor be?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.

What size plywood is best for subfloor?

The spacing of the joists governs the recommended thickness of the plywood subfloor. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but you should use slightly thicker 3/4-inch plywood for joists spaced further apart.

What do you put under plywood subfloor?

Plywood is only one type of underlayment. Other common types include cementboard or tile backer (used under ceramic or stone tile), foam underlayment (used under laminate and engineered wood "floating" floors), and rosin paper (used under solid hardwood flooring).

Should I put plastic under flooring?

What is the best moisture barrier for laminate flooring? For any flooring that requires a floating installation method, be laminate or vinyl planks, use a 6 mils (or thicker) plastic sheet as a moisture barrier. You can also use an underlayment with a moisture barrier built-in for water vapor control.

What do you put under wood flooring?

Is plywood better than OSB for subfloor?

OSB has a lower resale value than plywood due to its lower strength. For this reason, few homeowners prefer OSB in their homes. Apart from costs, plywood is superior in all the other areas, such as the strength of the structure. For this reason, it's a superior material for use on the subfloor.

Is sheathing good for subfloor?

As you can see, both OSB and plywood sheathing are good options for the construction of structural sub-floors. Both are strong, durable and long-lasting. Wood scientists agree that the structural performance of plywood and OSB are equivalent.

What are three common subfloor materials?

Common Subfloor Materials. There are four primary materials used as subfloor: plywood, oriented strand board (OSB), concrete, and high-performance panels. There are other subfloors materials out there, but they are used in more niche situations. The construction industry is constantly evolving.

Can cement board be used as subfloor?

No, Hardie cement board is not meant to be structural, and it will not work in place of a subfloor. The board is very strong in compression and very stable so that the tiles applied to it do not crack, but it has very little shear strength.

Can I use 7/16 for subfloor?

Glue is sprayed between each layer and the sheet is hot pressed. CDX plywood should be a minimum of 7/16 inch thick. The thicknesses are as follows: 7/16-, 15/32- and 1/2-inch-thick panels require joists spaced 16 inches on center; 19/32- and 5/8-inch-thick panels require joists spaced 20 inches on center.