What do I need to sand a dresser?

Sand the dresser using a medium-grit sandpaper, moving with even pressure and in the direction of the grain. Sand thoroughly, including all details. Wipe down with a tack cloth to remove dust. Sand again with a finer-grit sandpaper.

What do I need to refinish a dresser?

Do I need to sand a dresser before painting it?

DO sand the furniture before applying the paint. Furniture comes in a variety of materials and nearly all will require some level of sanding to make sure paint adheres to the surface, since it removes any imperfections or dimples.

Can you sand a dresser inside?

Can you sand furniture indoors? When sanding indoors, dust is always going to be a factor but I will show you can minimize dust with a dust catcher or be attaching your sander to a vacuum cleaner. In most circumstances, I'd recommend sanding outdoors or in your garage. However, sometimes sanding outside is unavoidable.

What grit do I need to sand a dresser?

If you're looking to take hardened paint off an old dresser, start the sanding process with 80-grit sandpaper; a coarse grade of abrasive makes fast work of removing thick coatings. With a lightly varnished dresser, start with 120-grit sandpaper, a medium-grade abrasive that leaves less scratch marks in the wood.

How To: Sanding

How do you sand a finished dresser?

Sand the dresser using a medium-grit sandpaper, moving with even pressure and in the direction of the grain. Sand thoroughly, including all details. Wipe down with a tack cloth to remove dust. Sand again with a finer-grit sandpaper.

Do I need to prime a dresser before painting?

More Tips on Painting Wood Furniture

It is best to prime all painting surfaces to prevent stains from bleeding through the new paint. Primer must match the type of paint you have chosen. For furniture, it's best to use a satin or semigloss finish in either a latex or an oil-based paint. Never leave primer unpainted.

Is it better to sand or strip furniture?

So then I point out that stripping is faster, and in the case of paint could even be safer than sanding. It's almost always better to strip than to sand. To begin with, except in cases where the old finish is flaking off, it's a lot more work to sand than to strip using a paint-and-varnish remover.

How do you sand a dresser without a sander?

LIQUID DEGLOSSER

Liquid sandpaper/deglossers are one of the least known ways to avoid sanding furniture. The liquid is applied directly to the surface. When you apply the new paint, a chemical reaction occurs and the new paint sticks to the old paint. This product does smell, so it should be used in a well vented area.

What kind of sandpaper do you use to refinish furniture?

The grades of sandpaper used most for furniture finishing fall in the fine and very fine categories - that is from 120 grit through 220 grit; with 320, 400 and 600 grit used for special purposes. For "hard to stain" woods, finish sanding with 120 grit will usually accommodate the problem.

What grit sandpaper should I use before painting furniture?

Be sure to start any painting project by sanding your surfaces with 150-grit sandpaper. (I use this orbital sander with variable speeds.) Be careful not to gouge the surface though: You're just looking to rough it up a little so the primer has something to adhere to; you're not trying to strip the surface.

What grit sandpaper should I use before painting wood?

Sanding is critical to creating a smooth surface. For wood that is going to be painted, use 120-grit, followed by 150-grit. For closed-grain woods (such as Cherry, Pine, Maple, Birch or Alder) that will be stained with water-based products use 150-grit followed by 220-grit.

Can I just paint over my dresser?

Clean the Dresser and Let It Dry

Remove any dust and debris from the surface. If the surface is not pristine, dust will get stuck in the paint and compromise the finish. Use a damp, lint-free cloth to wipe down the dresser. Allow the dresser to dry completely.

Can I sand varnish off wood?

If you plan on removing the varnish and then painting the wood, sanding can be an effective way to get rid of the varnish while prepping the wood at the same time. It's also a natural and chemical-free way to remove varnish.

What do you use to sand wood furniture?

Use a coarse sandpaper, a sanding block or a power sander to strip the finish off the surface. Sand until the surface is smooth and most of the shiny surface is gone. Once the majority of the old finish is off, switch to a medium grit sandpaper and continue to remove any patches of finish still sticking to the wood.

What is 220 grit sandpaper used for?

180 - 220 Grit: Fine. 180 – 220 grit is primarily used for the sanding finish or to sand in-between coats. It is also great for distressing! There are instances where you can use 180 to 220-grit to rough up a piece in preparation for paint, but you do not typically use these grits until after your first coat.