What do I need to empty my pool?

Can I just empty my pool?

Your pool is not meant to be empty. Whether you have a vinyl, concrete, or fiberglass pool, it is at its best when it's full of water. Once the water is drained, you open yourself up to all sorts of damage, so drain a pool only when there is no other option.

How can I empty my pool water fast?

All you need is a medium-size water or vacuum pump. Unroll the pump's intake hose so that it reaches the center of the pool (or as close to it as possible), and submerge it in the pool. Place the outlet hose so the exiting water doesn't flood the area, but drains off away from the pool. Dry your hands thoroughly.

What kind of pump do I need to empty my pool?

Submersible Pumps

If you've ever needed to drain your pool, it's likely you've already encountered a submersible pump. A submersible pump, as the name implies, operates while fully submerged in water. These pumps feature a lot of horsepower, and primarily drain the water safely from swimming pools and spas.

Will a pool crack if left empty?

Additionally, a lack of water means there's a lack of moisture on the pool walls. If left exposed to long periods under the hot sun, pool finishes will dry out, creating cracks and flaking.

How to Drain Water From an In-Ground Pool With a Drain at the Bottom : Pool Maintenance

How long does it take to drain a pool with a garden hose?

If you can pump around 30 GPM (gallons per minute), which is also equivalent to 1800 GPH (gallons per hour), it should take you 2.78 hours or 2 hours and 46 minutes to drain your pool using a hose.

Where do you drain pool water?

The best way to drain the pool is to empty it directly into the sanitary sewer line outside your home. The process is simple but can be time-consuming, depending on how fast you are able to pump the water.

How do you remove sediment from bottom of pool?

If there has been a serious invasion of excess dirt and debris, you may also need to shock your pool. Vacuuming is recognized as the only way to remove sediment from the bottom of a pool.

How do you drain a pool with a garden hose?

Put one end of your garden hose inside the port. Thread the hose to the back of your house. Attach the other end of the garden hose to a submersion pump and place the hose and pump in the deepest area of your pool, near the drain. The pool will begin to drain.

How much does it cost to drain and clean a pool?

It typically costs $500 to $700 to drain and clean a pool and usually takes several days. Since it's more expensive, a pool company will try other common treatments to clean the pool first.

How long can a pool be left drained?

Modern concrete pools can usually stand being drained for as long as needed, but there'll still be a risk of popping if the ground water level is high. Fibreglass pools are less resilient. The floor may come loose and float to the top when refilled, even after a short period.

Can I leave my pool empty for the winter?

It's not good to leave your pool empty when the weather gets cold. Leaving your pool filled with water can help prevent your vinyl or concrete foundation from being damaged.

Can you use a shop vac to clean bottom of pool?

Although you normally clean your pool with a manual pool vacuum or a vacuum device often called a "creepy crawler,'' you can clean it with a standard wet/dry shop vac. The disadvantage to this method is it takes a long time because you have to repeatedly empty the water from the shop vac.

Do I need a pool vacuum?

All pools both above ground and in-ground need to be vacuumed. Theoretically you can abandon all vacuuming duties, but watch your pool water look disgusting, dirty and cloudy. The process of vacuuming keeps chemicals working their best and increases the desire and appeal, especially on a hot summer day.

How much shock Do I need to open my pool?

How much shock is needed to open a pool depends on the condition of the water. Our spring startup kits have 4 lbs of pool shock, but you may need more. For a clear but hazy pool, 1 lb. per 10,000 gallons is usually sufficient.

What chemicals should I balance first in my pool?

Total Alkalinity (TA) is the first thing you should balance in your pool water. TA refers to the amount of alkaline material in the water. And since alkaline is a pH stabilizer, the number of alkaline substances in water will affect the pH balance. The ideal Total Alkalinity range for pool water is 80 – 120 ppm.