What comes first roof or fascia?

Fascia and soffit are installed after the roof installation is finished. It is ideal that soffit and fascia materials be installed before you place tiles or any other type of roofing material on the roof. There are different types of finished and variations that can be used for the soffit.

Should I replace fascia before or after roof?

While it's always a good idea to replace damaged fascia as soon as possible, it is essential to ensure it is in good shape before a new roof is installed. Metal eaves drip is an important component in a quality roof installation project.

Does fascia go on before shingles?

If your roofers are replacing your fascia board as part of a full roof replacement, then they will install the new shingles before they address the fascia. There is no way to replace the fascia board without removing the gutters, as the gutters are mounted to the board.

Does fascia go on before roof sheathing?

When sheathing a roof, the first step is to snap a line so that the first row goes on straight. But if you snap it at 40 inches, then the sheathing will not project over the subfascia or true fascia. This opens the door to the possibility of water damage by letting gravity work against you.

Which goes on first fascia or soffit?

The job goes smoother when you follow the correct installation sequence. First nail up the J-channel, then soffit panels, then fascia, then drip edge.

Fascia vs. Soffit (What's the Difference?)

Does fascia go on before gutters?

Before installing gutters, you should first place the fascia board, followed by the soffit. After those two components are successfully in place, you can tackle the gutter installation. You can opt for several kinds of materials and styles for your fascia, soffit, and gutters.

Do you install soffit before fascia?

The installation of soffit will determine the positioning of the inside and outside corner posts. It also is necessary to complete the soffit before the final course of siding is installed on the wall. Vinyl soffit is designed to be easily installed lengthwise from wall to fascia.

What goes on first fascia or drip edge?

The correct placement of a roof drip edge is on top of the roof's exterior cover directly between the sheathing and the fascia board, which forms a drainage gap between the drip edge and the fascia board. As a result, the drainage improves water flow and protects the roof from potential water damage.

Do you put fascia on before drip edge?

A metal drip edge will help protect the sheathing under the roof, but if it's installed too closely to the fascia board, it can still cause water to be drawn into the fascia. The best installation method is to leave a gap between the drip edge and the fascia board, about the width of a finger.

Is fascia part of the roof?

The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline. The fascia supports the shingles and helps to keep moisture out.

How do I fix the gap between my roof and fascia?

Start at the end of a fascia board and caulk the corner edge where two boards meet. Smooth the caulk bead with your finger and begin caulking the joint between the fascia board and the soffit (also known as the eave). Slowly move down the joint to apply a steady bead of caulk into the gap, instructs Ron Hazelton.

How often should fascia be replaced?

There is no definite timetable for replacing a soffit or fascia, but there are some signs that roof repair contractors look for when evaluating your roof's overall health.

What's the difference between fascia and soffit?

An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.

How long should fascia last?

While they tend to last for years, fascia and soffits do need replacing, so every homeowner eventually needs to recognise the signs of wear and tear.

How do you attach fascia to roof trusses?

Instructions for How to Attach Fascia Board to Roof Trusses

Mark the place closest to the end of the board that aligns with the center of a joist. Use the carpenter's square and pencil to put a straight line at the mark. Cut the board with a miter saw. Position the board against the trusses and nail it in place.

Do roof tiles rest on fascia board?

The tiles shouldn't be just rested on the fascia board as that is not what it is for, it's bad practice, and makes replacement fascia work harder.

What is the fascia attached to?

The fascia board is the long, straight board that runs along the lower edge of the roof. The fascia is fixed directly to the lower ends of the roof trusses and usually does all the work of supporting the lower edge of the bottom row of tiles. The fascia board also carries all the guttering.

What are the steps to roofing a house?

Does drip edge go over roof paper?

At the side, or gabels, of a roof, the drip edge goes over the roofing felt. At the bottom of the roof, the drip edge goes under the roofing felt.

Can drip edge be installed after shingles?

The most popular time to install a drip edge is when new shingles are installed. However, the drip edge can be installed at any time. The materials involved include: a ladder, a flat pry bar, a hammer, tin snips, eave stripping, and galvanized roofing nails.