What color is EPDM roofing?

While TPO has a natural white color, EPDM results in a dark gray or black color for your roof. The darker color is not helpful in reflecting UV rays; it does retain heat for those in cooler weather.

Is EPDM black or white?

With its superior flexibility and high strength, EPDM can easily contour to unusual roof shapes. White on Black EPDM is sold in sheets 10' wide and up to 100' long. White on Black EPDM carries a 10 year warranty on membrane only against weatherability and factory defects (chalking not included).

Is EPDM always black?

EPDM. This membrane is a mix of Ethylene, Propylene, and a bit of Diene Monomer (EPDM). Colors can vary from black to gray but it almost always has a smooth feel because it doesn't contain surface granules.

Can EPDM be colored?

An EPDM flat rubber roof can be painted on however it is important to do so correctly. Because the rubber membrane used for an EPDM flat roof is made from rubber, the typical colour is dark grey or black.

How do I know if I have EPDM or TPO?

If one side is a white or a dove color and the other side is black it is EPDM. If the roofing material is all one color, top and bottom, it is TPO. Some TPO roofing has a fleece backing too, but the thing to remember is if the roofing material is all one color it is TPO.

How to install an EPDM Flat Rubber Roof, ClassicBond

Which is better EPDM or TPO?

TPO has better dimensional stability than EPDM. EPDM is more likely to shrink which can cause a variety of problems on your roof.

How do you color EPDM?

It has now been discovered that EPDM granules can be colored by coating the granules with a paint or pigment, followed by a curing step, preferably by heating, which securely binds the paint to the rubber.

What colors are rubber roofs?

Although rolls of rubber roofing come in standard black and white, adding universal colorant to white roll roofing changes the material to a pastel color based on a mixture of the white base to the colorant's pigment. These pastels include light yellows, greens, oranges and blues.

Do you have to coat a rubber roof?

You don't need to coat a rubber roof. The EPDM membrane is a waterproofing sheet and is the final and top layer. An EPDM rubber roof sheet is incredibly durable and boasts a number of properties that keeps it protected from weather conditions.

Does EPDM roofing come in white?

Available in both 60-mil & Platinum™ 90-mil thicknesses, RubberGard EcoWhite EPDM Membrane is a bi-laminate, white-on-black cured membrane that can be used in conjunction with the comprehensive RubberGard EcoWhite EPDM line of accessories for rapid, consistent and cost-effective fully-adhered installations.

How do you tell if my roof is EPDM?

What is white flat roofing called?

TPO. TPO stands for Thermoplastic Polyolefin. TPO shares many of the positive characteristics of PVC roofing material. It is typically white in color and fabricated from polypropylene and ethyl propylene rubbers. This result is a perfectly flat, single piece of membrane.

Is TPO black?

TPO offers many of the same benefits as PVC roofing, such as hot-air weldable seams and energy efficiency, but at a lower cost. Many homeowners appreciate the fact that TPO is manufactured to look great on many different types of homes. TPO is available in white, light grey and black reflective color options.

Is there black TPO roofing?

Among the hundreds of micro-decisions that must be made when you're building is the decision of selecting a roof membrane. It's about much more than aesthetics: white TPO roofing and black roofing have their own benefits and drawbacks.

What is EPDM roofing made of?

EPDM is an extremely durable synthetic rubber roofing membrane (ethylene propylene diene terpolymer) widely used in low-slope buildings in the United States and worldwide. Its two primary ingredients, ethylene and propylene, are derived from oil and natural gas.

How long will a EPDM roof last?

EPDM roof membranes remain stable over time and can have a life expectancy of over 50 years. ** Made from synthetic rubber, EPDM roofing membranes have two primary ingredients, ethylene and propylene, which are derived from oil and natural gas.

Are EPDM roofs any good?

An EPDM roof lasts a long time. In fact, even with only minimal attention, an EPDM roof can last 50 years or even longer. New formulations for the rubber make these roofs virtually impervious to radiation and damage from UV rays. They are wind resistant and stand up well to hail as large as three inches across.

Can you put EPDM over shingles?

Apply Liquid EPDM over Shingles in the position that all wrinkles are out before applying adhesive. Fold membrane back over itself, clean membrane thoroughly with recommended cleaner. Apply Liquid EPDM over Shingles in position and all wrinkles are out before applying adhesive.

What does EPDM stand for?

EPDM stands for ethylene propylene diene monomer, which is a bit of a mouthful, so it's commonly shortened to EPDM or EPDM rubber. EPDM gets its name from the chemicals (monomers) that are mixed together in various proportions to form it. These are ethylene, propylene and diene.

What is EPDM flooring?

What is EPDM Rubber Flooring? EPDM (ethylene propylene diene methylene) rubber is synthetic and is used for various uses including playground surface and sports flooring purposes. It is safe and non-toxic, which makes it a great option for children's playgrounds.

Can EPDM be painted?

Can You Paint Epdm Rubber Roof? It is important to paint a flat rubber roof correctly, however you can paint it. It is strongly recommended that you clean and clear the rubber membrane before painting your EPDM flat roof.

How do I maintain my EPDM roof?

Regular cleaning is required to maintain the EPDM surface, and consistent washes ensure resistance from heat cracking. When conducting routine rubber roofing cleans and check-ups, sweep away any excess leaves, sticks or material resting upon the rooftop.

How do you clean EPDM?

Using a mild laundry detergent mixed with water, scrub the entire roof with a medium bristle brush, then rinse thoroughly to avoid residue build-up on the roof or sidewalls.

Does rubber roofing come in colors?

1. It is Available in Different Colors: By far the most common color for EPDM roofs is black. What many people dn'y know is that they can also be installed in white.