What clarity should emerald diamond be?

Clarity Grade

Emerald cut diamonds don't conceal imperfections well due to their long, open facets, so clarity (or lack of inclusions) is important. We recommend an eye-clean VVS1 clarity grade or higher.

What are the ideal specs for an emerald cut diamond?

Most emerald cut diamonds have length to width ratios ranging from 1.30 to 1.50. A ratio of 1.40 is considered “ideal”. However, ratios are dependent on personal preference. A lower ratio should be chosen for a more square shape, while for an elongated, more rectangular shape, a higher ratio is best.

Is color or clarity more important in an emerald cut diamond?

And since step cut diamonds are not as bright and fiery as brilliant cut stones, there's nothing about the faceting style that can mask the blemishes within the stone. For this reason, clarity is one of the most important gradings to consider for an emerald cut diamond.

Is VS2 OK for emerald cut?

The clarity rating for an emerald cut diamond should be no less than VS2 clarity; otherwise the inclusions will be more visible. When purchasing step cut diamonds, make sure the color grading is no lower than H to I color. J to K color grades will make the diamond look slightly tinted.

What is a good depth for an emerald diamond?

The proper depth percentage for an emerald cut is between 65% and 75%. You will find that an emerald cut diamond cut within this range will deliver more brilliance. An emerald cut diamond cut shallower than 65% will let a greater percentage of light leak through the pavilion which results in less diamond brilliance.

Emerald Cut Diamonds - LB Diamond Difference IGTV

How can you tell a high quality emerald?

The most-prized emeralds are highly transparent. Their color is evenly distributed, with no eye-visible color zoning. If the hue is too yellowish or too bluish, the stone is not emerald, but a different variety of beryl, and its value drops accordingly.

Are Darker emeralds better?

TONE AND SATURATION

Fine emeralds tend to fall between 2 and 8. Note that darker does not mean better. Rich color is the darkest one should look for in emeralds. The finest gemstones are based on taste and generally range from medium, medium rich, to rich color.

What's better VS1 or VS2?

What do the numbers 1 and 2 mean – VS1 and VS2? A VS1 diamond has slightly fewer and smaller inclusions than a VS2 diamond. In other words, a VS1 diamond is slightly better than a VS2 diamond.

Is lighter or darker emerald better?

An emerald can have a light, medium or dark tone which means that it will be a light shade of green, a moderate green or a dark green in colour. The most valuable and most attractive emeralds have a medium to moderately dark tone.

Is SI1 or VS2 better?

Like VS2 diamonds, most SI1 clarity diamonds are flawless to the eye. But SI1 clarity diamonds are more likely to contain larger, noticeable flaws. If you're not the type to shop around and ensure your diamond will be eye-clean, stick to a VS2 clarity diamond.

Why are emerald cut diamonds less sparkly?

Even though this shape usually features 58 facets, emerald cut diamonds are less sparkly due to their step cuts.

Do emerald cut diamonds scratch easily?

Contrary to what many may have heard, emeralds are quite resistant to scratches and chipping, rating a 7.5-8/10 on the Mohs Hardness Scale. But that doesn't mean they are impervious to damage. Inclusions (common natural imperfections in the stone) can make them prone to cracking.

Do emerald cut diamonds sparkle rainbow?

Genuine diamonds do not sparkle in rainbow colors inside of the stone. Instead, the inside of real diamonds sparkles in tones white and gray.

How many carats of emerald should be worn?

The weight of the Emerald/Panna stone should be atleast 1.5 carats or ratti. Ideally, to get maximum benefit, the weight should be 5 carats or more.

What does an emerald cut diamond say about a woman?

Emerald shape diamonds have long facets & layered corners that resemble stairs and, like its wearer, is strong and bold. This stone shape is for the woman who enjoys flashy and exuberant fashion. An emerald shape will highlight clarity better than any of the other shapes.

Who wears an emerald cut diamond?

For those who love the glamour of Hollywood past and present, you can enjoy an emerald cut diamond knowing it is a favorite of many celebrities. This style has adorned the fingers of top names including Grace Kelly, Liz Taylor, Beyonce and Jennifer Lopez.

Which emerald is the best quality?

Colombian rough emeralds are known for the highest quality. These emeralds have a warmer and intense pure green color. Deep green emeralds are a rare occurrence in nature, hence are highly prized and sought after.

Are Darker emeralds more expensive?

Darker emeralds are often considered more valuable, but if an emerald becomes too dark, it becomes less valuable. Emeralds with medium to medium-dark tones are the most valuable emeralds in the market.

Do emeralds hold their value?

There are some rare finds among the so-called semi-precious gems that can be priced higher than the big three, but in general, a fine ruby, sapphire or emerald will hold its value and command more respect and a higher price than other gemstone.

What is the classiest diamond cut?

The marquise cut is the ultimate in elegance. Its oval shape meets in pointed ends, resembling the hull of a ship — this cut is also known as the Navette cut (meaning "little boat" in French). In addition to being unique, this cut is also great for someone looking to create the illusion of elongated hands.

Is Costco diamond jewelry good?

Overall, Costco diamonds are of decent quality and offer great value, as long as they're GIA certified. You can find a ring for 50% less than at other big-name jewelry stores. But compared to online retailers, Costco cannot match their selections, customization, or service.

Is an F color diamond good?

The F color grade is a great choice. This is the lowest of the three colorless diamond grades, which makes it the most economical way to enjoy that sparkly, icy look. F-grade stones account for 20 percent of diamonds sold at Blue Nile.

What should I look for when buying an emerald?

Most gemologists agree that it all comes down to color when purchasing an emerald. Color should be evenly distributed and not too dark. Rare emeralds will appear as a deep green-blue, while lighter colored gemstones are more common (and therefore, often more reasonably priced).

Are darker or lighter emeralds more expensive?

Though emeralds are classically green, they actually range from yellow-green to blue-green. Emerald color is defined based on three aspects: its hue (color), saturation (intensity), and tone (purity). The more vivid the green, the darker and purer it shows, the more valuable the emerald.

What are the disadvantages of emerald?