What cars use 10W-30 oil?

10w30 is a multi-grade engine oil ideal for heavy-load engines because of its ability to withstand hot temperatures for a long time without compromising the performance of the engine. This engine oil has a viscosity grade of 10 in low temperatures and 30 in high temperatures.

What car takes 10W-30 oil?

In addition to high-performance turbocharged, supercharged, multi-valve fuel injected engines found in passenger cars, SUVs, light vans, and light trucks, Mobil 1 10W-30 is recommended by ExxonMobil for all types of modern gasoline-powered vehicles.

Can I put 10W-30 oil in my car?

The answer is yes. If you are not in a situation where low-temperature startup anti-wear protection is not critical to you, then using 10w30 oil can be fine as well. The main difference between 5w30 and 10w30 is that the latter has a higher Viscosity Index (VI) than the former.

What is 10W-30 used for?

They are fuels for lubrication of engines. 10w30 is also an engine oil that is used for lubrication of the parts of an engine, but they are used for a smaller range of temperatures. The difference between the two engine oils is marked by their respective viscosities.

Is it okay to put 10w30 oil in a 5w30 car?

Synthetic oils will mix perfectly, as long as they have the same chemical composition. As a result, mixing 10w30 and 5w30 is not a problem since one will be topping up. It is not harmful to mix engine oils because 5w30 and 10w30 engine oils have close viscosity, so mixing them is not harmful.

What does 10w30 mean? 'Engine Oil Explained'

Is 10W30 better for high mileage?

10W-30 motor oil makes for a decent high-mileage oil. It gives a better fuel economy while reducing the oil consumption for older engines. Older engines with more than 75,000 miles on them require a thicker oil that will properly lubricate their critical engine parts and prevent oil leaks, sludge, and deposits.

Is 10W30 good for winter?

10W30 vs 10W40 Oil FAQs

10W-30 motor oil is recommended for ambient temperatures not exceeding -30°C/-22°F in the winter or 35°C/95°F in the summer. This is a great motor oil to use if you live in Canada or cooler U.S. states. Colder regions would require 5W-20, while hotter regions may call for 10W-40.

What happens if you put 10w30 instead of 5w20?

Notwithstanding the recommendations of the car manufacturer, mixing 10w30 and 5w20 will not cause any sort of harm to the engine. However, a few drivers claim that it is safer to combine two multi-grade or straight weight oils, rather than mixing multi-grade with straight weight oils.

What's better 10w30 or 10W40?

10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.

Which oil is better 5W 30 or 10W 30?

5W-30 multi grade oil is ideal for private vehicles and light-duty petrol and diesel engines. It also provides a better cold temperature start than 10W-30 oil. On the other hand, the slightly thicker oil,10W-30, provides better lubrication for commercial vehicles and heavy-load engine cars.

What if I put the wrong oil in my car?

You might notice a few oil spot in your garage or under your car because using the wrong oil can lead to leaks, or you might become aware of a burning smell while driving. If the oil isn't working as it should engine parts might not be lubricated well enough and cause friction, which can burn the oil.

Will thinner oils damage your engine?

Just like using an oil with too high a viscosity may lead to problems in Brad's engine, using a thinner oil can have the same result. Oil that's too thin can fail to develop a consistent lubricating film, inviting metal-to-metal contact that causes wear. Extreme stress and heat add to the challenge.

Is 10w30 thicker than 5w20?

The motor oil is categorized according to its viscosity. Whether the oil is thicker or extra thinner, it specifies the type of engine it is suitable for. There are hundreds of oils but 10w30 and 5w20 are the most common of all. The 10w30 type is the thicker one and 5w20 is the thinner.

Is 10W30 good for summer?

As a general rule, you'll get the best protection in the summer when you use a slightly thicker grade of oil, such as a 10W30 instead of a 5W30. Engines need a thicker oil in the summer months because of the summer heat and its effects on thinning the oil out.

Is it OK to mix 10W30 and 10W40?

You will be fine with that. They will mix right in with each other and no harm will be done. Even if you were to mix syn with conventional you'll be fine. If you were to labratory test your oil it will read out as not a true 10w-30 but no harm will be done.

Is Thicker oil better for older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil - 10W - can help protect worn engine bearings as well.

What's the difference between 5W 30 and 10W 30?

Both the oils have similar viscosity at 100 degrees Celsius but 5w30 grade oil will thicken less than 10w30 grade oil in cold climate. This means 5w30 grade oil will flow effectively in low temperatures, whereas 10w30 oil will flow effectively in high temperatures because of the smaller temperature window.

Can I switch from 5w20 to 10w30?

Originally Answered: Can I put 10w30 instead of 5w20? You can, but you will get worse mileage, and in most cases shorten the life of your engine, as it will take longer to pump up pressure for your bearings and lifters, and won't spray your lower cylinders for an extra second or so on each cold start.

Can I use 10w30 instead of 5w30 in summer?

Although both 5w30 and 10w30 are multi-grade, the latter thins enough when living in an area with extremely low temperatures. This makes it perform much better during the winter season than 10w30. 10w30, on the other hand, will flow effectively in hot summers or higher temperatures.

What temperature is 10w30 oil good for?

Both 5w30 and 10w30 are multi-grade products. This means they are designed to perform at both cold starting temperatures and normal operation temperatures of 210° F without sacrificing performance.

Is 5w30 or 10w30 better for winter?

10w30, the thinner 5w30 will circulate quicker, and flow through bearing tolerances better during an engine startup in the winter or colder climates. The “w” behind the five and the 10 indicates that those are the viscosities in colder or winter temperatures.

Does oil get thicker as it warms up?

Your engine needs oil that is thin enough for cold starts, and thick enough when the engine is hot. Since oil gets thinner when heated, and thicker when cooled, most of us use what are called multi-grade, or multi-viscosity oils.

When should I switch from 5W 30 to 10W 30?

When Should I Switch From 5w 30 To 10w 30? While some car manufacturers still recommend 10W-30 (or even 10W-40) as an appropriate engine oil option for summer use, there is no need to switch to 10W-30 motor oil in the summer if 5W-30 is an acceptable grade for your engine.

Is 10W 30 oil synthetic?

Mobil 1 10W-30 is an advanced full synthetic motor oil designed to help keep engines running like new by providing exceptional cleaning power, wear protection and overall performance. Mobil 1 10W-30 meets or exceeds the requirements of the latest industry standards required by modern gasoline engines.

What does the W mean in oil?

The “W” that you see on oil labels stands for the word "Winter" because this portion of the label shows the viscosity level of oil when an engine is cold. Motor oil that is thinner can flow more easily and faster. This is important because when you start a cold engine, the oil needs to lubricate the equipment quickly.