What car had a 413 cubic inch engine?

The Max Wedge, formally the Maximum Performance Wedge, was an engine option produced by the Chrysler Corporation from 1962 to 1964, that was available exclusively in B Platform (intermediate) Dodges and Plymouths. The Max Wedge motor used the Chrysler RB Block, and was produced in 413 and 426 cubic-inch iterations.

What car has a 413 engine?

The 413-cid V-8 had been around since 1959, but not until '61 did it find its way out of big Chryslers and into smaller Dodges and Plymouths.

How much horsepower does a 413 have?

The 426 was rated by Dodge at 415-425 gross horsepower and 470-480 lb-ft of torque; the 413, at 410-420 hp and 460-470 lb-ft. The new engines dominated NHRA's Super Stock class and the Stage II motors boosted NASCAR racing wins.

How do I identify a Chrysler 413?

The 413, 426 wedge and the 440 cubic inch engines are known as "RB" engines (raised block) The 426 cubic inch Hemi is in a class by itself. To locate your casting number, look on the side of your block and compare it to the chart below for engine Id, the date may also be stamped on the block by the casting numbers.

What is a 413?

413 is an HTTP status code for a request that is too large for the server to complete.

High Performance 413 Big Block Mopar Build

What is Dodge big block?

The Big-block Mopar crate engine goes by many names. You may know it as the 383, 400, or 440. Racers call it the "wedge" to distinguish it from the ever-popular Hemi. Chrysler experts alternately call it the B-series or RB-series, depending on whether it's a short-deck or tall-deck block (more on that later).

Is the 413 a Hemi?

Making Way for the Hemi

The 413 and 426 Max Wedge engines continued to be made in 1964. In the heyday of 1962-64, you could get these engines in any B-Body Chrysler product. That included the Dodge 330 or 440, the Polara and Polara 500, and the Plymouth Savoy, Belvedere, Fury, or Sport Fury.

What cars had a 413 Max Wedge?

The Max Wedge, formally the Maximum Performance Wedge, was an engine option produced by the Chrysler Corporation from 1962 to 1964, that was available exclusively in B Platform (intermediate) Dodges and Plymouths. The Max Wedge motor used the Chrysler RB Block, and was produced in 413 and 426 cubic-inch iterations.

Was the Chrysler 383 a big-block?

The 383 Chrysler B engine is known as the Mopar big block that nobody loves. Typically, gearheads favor its beefier big brother, the 440. The 383 B is characterized by its large cylinder bore of 4.25 inches with a short stroke of 3.375.

Is a 426 wedge a Hemi?

Max Wedge. The name just oozes performance. All the talk today is Hemi this, Hemi that, but before Chrysler unleashed the 426 Hemi on the street, there was another engine displacing 426 cubic inches.

What year did they make 426 Hemi?

Known as the "Elephant" engine due to its massive size and cylinder heads, the 426 Hemi arrived on dealer showrooms in 1966, available in several models in the Dodge and Plymouth full-size lines.

How much horsepower does a 426 Max Wedge have?

Power was rated at a maximum of 420 ponies with torque checking in at an incredible 500 lb-ft. The Max Wedge was introduced in 1962 in a number of mid-size models offered by Plymouth (the Super Stock 413) and Dodge (the Ramcharger 413).

What is a Dodge 880?

The Dodge Custom 880 is an automobile that was marketed by Dodge from 1962 through the end of the 1965 model year. It was to fill Dodge's product offer in the mid-price full-size market segment, as well as to help fill the void in Chrysler's lineup left by the discontinuation of DeSoto in 1961.

How much horsepower does a 426 Hemi have?

MoPar 426 Hemi

The 426 street Hemi was rated at 425 horsepower from the factory. This Chrysler dyno sheet from decades ago and this close-to-stock dyno session of a new 426 Hemi both put the gross horsepower rating at about 470 horsepower without full exhausts and other engine-driven accessories.

Was there ever a 440 Hemi?

The rarest is the Hemi-powered Coronet 440 convertible (440 was the trim level not the engine). Only six were built.

How much horsepower does a 440 Magnum have?

Though the factory rated the HiPo 440 at 375 hp, this rating, like many of the day, was generally regarded as optimistic. Searching the factory info in some of the old racing bulletins, we find that even Chrysler considered the 375 horsepower rating as excessive.

What is the biggest Hemi motor?

The 426 Hemi was nicknamed the "elephant engine" at the time, a reference to its high power, heavy weight and large physical dimensions. Its 10.72 in (272.3 mm) deck height and 4.80 in (121.9 mm) bore spacing made it the biggest engine in racing at the time.

What is a 572 Hemi?

FHO 572 Street Hemi Package. The 572 has become the most popular engine produced at FHO. It offers the most bang for the buck, with improved torque and power over the smaller 528/540's. With the added low end torque, this engine does not require steep gears or high stall torque converters to perform.

What's the biggest Hemi you can get?

Mopar is unleashing the most powerful production muscle-car engine ever available to builders and enthusiasts with the launch of its newest crate engine – the 807-horsepower Hellcrate Redeye 6.2-liter Supercharged HEMI® V-8 engine.

Where is a 413 number from?

Area code 413 (LATA code 126) is a telephone area code in the North American Numbering Plan (NANP) for the western third of Massachusetts.

Did Chevy make a Hemi motor?

Chevrolet 302ci Small-Block Hemi

You didn't know Chevrolet built small-block hemi V-8s in 1969? At the time, racing in SCCA's premier Trans Am series was a prestigious thing, and winning was even better.

What is the nickname of the 426 Hemi?

In the mid-'60s, Chrysler released the second-generation 426, using the term Hemi for the first time. This is the engine that earned it the "Elephant" nickname, based on its prodigious strength, power, and size.