What can I use to clean cement?

General Cleaning for Dirty Cement
In a bucket, combine 1/2 cup baking soda, 1 gallon of hot water, and a good squirt of liquid dish soap. Use a push broom or stiff brush to spread this around and scrub dirty spots. Rinse, and let it dry. For lingering stains, rewet the surface and sprinkle it with oxygenated bleach.
Takedown request   |   View complete answer on housewifehowtos.com


Will white vinegar clean concrete?

White vinegar and a little scrubbing with a brush is a very effective, eco-friendly way to remove rust stains from concrete—even those that are decades old. Pour the white vinegar directly onto the stain, allow the liquid to penetrate the area for 20 minutes, and scrub with a stiff-bristled brush.
Takedown request   |   View complete answer on thisoldhouse.com


What household items can you use to clean concrete?

Five Concrete Cleaning Products To Use
  • Soda. Soda can be used to remove grease stains. ...
  • Detergent. This is recommended for smaller grease spills. ...
  • Vinegar and Baking Soda. Cleaning concrete with vinegar or baking soda is a good option if you are looking for a natural cleaner. ...
  • Concrete Cleaner or Degreaser. ...
  • Bleach.
Takedown request   |   View complete answer on wolfpaving.com


How do you clean hard cement?

Keep spraying the soapy water to saturate the cement. The porous nature of the cement absorbs to soapy water, making it easier to remove. After saturating the cement for a few minutes, use a plastic putty knife to scrape it from the glass. Rinse the glass with your hose, and sponge away any remaining residue.
Takedown request   |   View complete answer on shinewindows.ca


How can I make my concrete white again?

  1. Wet down the concrete with a hose or bucket of water. This helps the baking soda stick to the surface.
  2. Pour baking soda over all of discolored areas. Lightly moisten the baking soda to form a paste. ...
  3. Allow the baking soda paste to sit on the concrete overnight. ...
  4. Apply vinegar or bleach to the discolored areas.
Takedown request   |   View complete answer on hunker.com


How to Clean Concrete | Part 1 – Sealing Concrete – DIY Cleaning



Can I use bleach to clean concrete?

Concrete driveways are prone to dirt, residue, mold or mildew. Yes, you can clean them with bleach. In fact, bleach not only removes many stains, but it also deodorizes and kills mold and mildew when used properly.
Takedown request   |   View complete answer on powerwashingprosnj.com


Will straight bleach harm concrete?

Bleach is safe to use on concrete. When applied to concrete, bleach does not harm the sturdy material. However, it does remove spots and unwanted matter from the surface, such as mildew and moss. It also disinfects concrete.
Takedown request   |   View complete answer on hunker.com


Does vinegar dissolve cement?

Vinegar is a great option to remove cement stains. Vinegar is acidic and will dissolve concrete and cement stains effectively.
Takedown request   |   View complete answer on way.com


How do you clean a cement driveway?

Clean the Concrete With a Driveway Pressure Washer
  1. Step 1: Wet the Concrete. Use a garden hose to wet the entire concrete surface. ...
  2. Step 2: Add Concrete Cleaner. ...
  3. Step 3: Start the Pressure Washer. ...
  4. Step 4: Apply Concrete Cleaner Evenly. ...
  5. Step 5: Flush the Pressure Washer. ...
  6. Step 6: Wash With a Pressure Spray Tip and Water.
Takedown request   |   View complete answer on lowes.com


Does washing powder clean concrete?

It looks fab! Biological washing powder is the way to go. Something really strong like Bold or Daz. Wet patio with warmish water, sprinkle on, leave for an hour or two, scrub with a stiff brush and hose down with clean water.
Takedown request   |   View complete answer on mumsnet.com


Will Dawn clean concrete?

While you may think of dish soap only for washing your dishes, it actually works well for keeping your concrete floor clean. Dish soap, when mixed properly, removes all dirt and buildup without leaving behind any film or residue.
Takedown request   |   View complete answer on ehow.com


What does baking soda do to concrete?

Baking Soda: Creates voids and pinholes in the surface. It acts as an accelerator. Veining Compound: Absorbs water from the mix and creates a colored line in the concrete. Spritzing with water activates cement and makes the vein more solid.
Takedown request   |   View complete answer on concreteexchange.com


How do you get black off concrete?

Liquid Laundry Detergent and Household Bleach. One of the most common and effective means of removing black or green mold from concrete is bleach. Bleach will kill mold down to the root, cleaning it off concrete while also preventing it from returning.
Takedown request   |   View complete answer on plasticinehouse.com


How do you get stains out of unsealed concrete?

How to Clean Unsealed Concrete Floors and Remove Stains
  1. Sprinkle sawdust on grease and oil stains.
  2. Sweep the floor with a push broom.
  3. Dust mop or vacuum the floor.
  4. Apply detergent and water on the stains.
  5. Scrub the stained spots with a brush.
  6. Mop with a baking soda solution.
  7. Rinse and wipe the floor dry.
Takedown request   |   View complete answer on floortechie.com


Can you use OxiClean on concrete?

Although it's possible to scatter the OxiClean powder on the wet concrete and then scrub with a stiff broom, you'll probably get a more uniform result by mixing the powder with water first. Use four scoops of powder per gallon of water. The powder mixes best into warm-to-hot water.
Takedown request   |   View complete answer on washingtonpost.com


How do you make homemade concrete cleaner?

Mix equal parts water and vinegar and apply it to concrete. If this stain removal technique doesn't work, use 100% vinegar and scrub stains out. This solution can work on many surfaces, including car seats and hardwood floors.
Takedown request   |   View complete answer on tipsbulletin.com


How do you clean concrete sidewalks?

Treat the concrete with dish soap and water. Upgrade to a powder laundry detergent and water. Apply a scrubbing cleanser, such as Comet or Bon Ami. Exchange your brush for a pressure washer, starting over again with water alone and then working through the cleansers.
Takedown request   |   View complete answer on blog.expertsinyourhome.com


How do you get rid of moss and algae on concrete?

Distilled white vinegar has a pH of 2.4 in the 5 percent strength sold in jugs at grocery stores. One product that's labeled for use on concrete, as well as numerous other materials, is Wet & Forget Moss, Mold, Mildew & Algae Stain Remover ($24.38 for a half gallon at Home Depot).
Takedown request   |   View complete answer on washingtonpost.com


How do you clean a dirty patio without a pressure washer?

Contrary to popular belief, you don't need any fancy products to clean a patio without a pressure washer. In fact, one of the most effective patio cleaning products is good old-fashioned washing-up liquid mixed with warm tap water.
...
Soapy water method
  1. Washing-up liquid.
  2. Warm water.
  3. Bucket.
  4. Hard-bristled brush.
Takedown request   |   View complete answer on simplypaving.com


Can white vinegar damage cement?

Will Vinegar Damage Concrete? Cleaning concrete with vinegar will not damage it! However, saturating concrete for an extended period will damage the cement that binds concrete together. Over time, vinegar erodes the concrete itself, so be careful.
Takedown request   |   View complete answer on garagetransformed.com


Is vinegar good for cleaning cement floors?

Cleaning Concrete Floors with Vinegar

A natural, all-purpose cleaner, white vinegar is one of the best ways to clean concrete, especially if your floor has stubborn stains caused by mildew or grease. Vinegar also works as a phenomenal spot treatment and stain remover.
Takedown request   |   View complete answer on tipsbulletin.com


Can you use hydrogen peroxide to clean concrete?

You can also use hydrogen peroxide-based cleaners instead of dish soap. Let it sit on the wet stain for about 10 minutes or so, then scrub in a circular motion until the stain is removed.
Takedown request   |   View complete answer on coit.com


What does hydrogen peroxide do to concrete?

Oxalic acid or hydrogen peroxide can be used to help bleach out some of the pigment from the concrete pours. Solutions of sodium hydroxide, xylene, or methyl ethyl ketone are also helpful in removing graffiti. Effective cleaning can also be accomplished with water blasting and sandblasting.
Takedown request   |   View complete answer on unitedconcreteandgravel.com
Next question
What is better SS or RS?