What can I use instead of belt dressing?

WD-40 doesn't stop rubber squeaks If you want to lubricate rubber parts, use a silicone or dry Teflon lube product. Spraying an oil based lube onto a serpentine or poly-ribbed drive belt may make the squeak disappear for a while, but it doesn't fix the underlying problem.

What can I use other than belt dressing?

anyway you can use silicone spray. Ivory soap works wonders. Dish soap or you could try putting it on propperly.

Can you use WD-40 instead of belt dressing?

Just spray a little WD-40 Specialist Automotive Belt Dressing with the engine running. It penetrates into the cord fibres to restore flexibility and pliability.

Can I use silicone spray on my serpentine belt?

Trusted mechanic suggested spray silicone to quiet squealing belt. Tried it and it worked. Did it several times over a period of about 6 months or so. Serpentine belt broke most of the way across and beat the underhood mat up.

Can you put grease on a serpentine belt?

Rubber parts can be lubricated with silicone or dry Teflon lube products. Spraying an oil-based lube on a serpentine or poly-ribbed drive belt may temporarily alleviate the problem, but it will not solve it permanently. As well as damaging the belt, it also causes damage to the belt.

Belt Dressing - WD-40 Specialist Automotive Range

Will soap stop a squeaky belt?

That's right, ordinary bar soap can usually stop the squealing when rubbed on a fan belt. Just a few rubs on the belt with bar soap can solve the bar squealing problem for quite some time and save money in the process.

Does WD 40 ruin serpentine belt?

Is It Okay To Spray Water On Serpentine Belt? Drive belts should never be sprayed with belt dressing, WD-40, or any lubricant. It is possible for motor oil and coolant to damage a serpentine belt.

Is belt dressing the same as belt conditioner?

Belt dressing is intended as a tool to help you maintain your belts. It's not an easy fix for all squeaks. If your belt is slipping because the rubber is starting to dry out, then belt conditioner will stop the squeak by softening it and moisturizing it.

Is belt dressing a lubricant?

Belt dressing limits friction between parts and stops squeaking sounds in running machinery. These lubricants are ideal for flat, round, or V-shaped belts in leather, rubber, or canvas.

Does belt dressing ruin belts?

Today, you should never put belt dressing on an EPDM-made serpentine belt. Belt dressing, and other oils and solvents, may quieten the belt noise when first applied, but these oils will actually cause the belt's rib surface to become more aggressive once they dry out, leading to even more belt noise issues.

Why does my car belt squeal?

Your engine belts make a screech or squeal noise usually because the rubber belt is slipping on the metal pulley and just like your tires spinning on the road, this causes noise. The belt may be slipping due to improper tension or because it simply has gotten old and the surface has become glazed, cracked or brittle.

Why does my serpentine belt squeal when it's cold?

The cold weather causes rubber to be less pliable and a bit brittle. As the engine pulleys turn the rubber belt at a very rapid pace, this will cause them to squeak a bit until the rubber material warms up and becomes more pliable. This may also happen when the belt needs to be tightened up.

Does silicone spray preserve rubber?

Berryman Professional Silicone Spray is an excellent lubrication, waterproofing, and corrosion protection product for most surfaces including metal, wood, rubber, and plastic.

How do you lubricate a belt?

Apply approximately ½ oz (1/8 of bottle) to the underside of belt. Repeat steps 1-3 on the opposite side of the belt. Plug in treadmill, power it on, and run the treadmill for 3-5 minutes to disperse treadmill lubricant evenly.

Can antifreeze ruin a serpentine belt?

Yes. Antifreeze will cause damage the rubber compound in the belts. If you do not replace it now then it will slip and may cause the water pump installer to not warranty the work.

Does antifreeze degrade rubber?

It provides protection from rust and corrosion and does not harm rubber hoses and plastics. Antifreeze should not corrode metal parts, attack rubber, become viscous at low temperatures, or evaporate readily at the ordinary engine operating temperature.