What are the disadvantages of resin driveways?

Heavy Usage

Resin bound driveways and surfacing aren't the best choice for areas that regularly endure heavy traffic and usage. While this type of surface course is quite durable and robust, wear and tear over time can lead to cracking. This cracking can potentially lead to further and deeper damage.

Are there any problems with resin driveways?

There are a number of things that can go wrong in the installation of a Resin Bound surface – we will highlight the most common issues and problems and advise you on how to avoid them. Common issues include unexpected rain damage, surface detachment or shading, reflective cracking and iron spotting.

How long do resin driveways last?

Its longevity: resin bound paving is a long lasting durable surface. While guarantees vary between 10 – 21 years, when properly installed and maintained, can last for more than 25 years. It requires minimal maintenance: there are no weeds to 'weed' or loose stone to sweep.

What are the pros and cons of a resin driveway?

Do weeds come through resin driveways?

The short answer is no, a resin driveway if installed correctly should be weed resistant, no weeds should grow through the surface, however it is possible for seedlings in the air to land on the resin driveway and cause some growth.

What Is Resin Bound, and Why Is It Becoming So Popular? | Part 2

Can you pressure wash a resin driveway?

The short answer is yes – you can jet wash a resin surface such as a resin bound driveway or patio.

Is resin better than tarmac?

Resin driveways provide you with an anti-slip surface as they are installed with a smooth finish and no loose chippings (and are SUDS compliant). Whilst tarmac is a sturdy surface and can withstand strong forces of pressure, over time the bonds can weaken and create loose stones.

Do resin Drives crack?

Once the resin driveway has been installed, any issues that may arise usually occur in the following days from completion. Once a few days have passed, there are very few problems that could happen, except possible cracking on the surface.

Are resin driveways slippery?

If they lay a mix of straight aggregate and resin, without the aid of anti-slip sand or glass grit, then the surface will be extremely slippy when wet. For areas that require extra traction you can sprinkle a fine glass grit into the surface after installation while the resin is curing.

Is resin better than block paving?

A Resin Bound surface is very easy to maintain, and arguably lower maintenance than Block Paving. Block Paving can be susceptible to weed growth between slabs and can fade after UV exposure. They also need regular pressure washing to keep their natural vibrancy.

Is resin cheaper than paving?

Overall resin-bound paved driveways are cheaper than block paving. There are of course many factors to consider such as the size of the area, the condition of the surface that you are laying on, materials used and the amount of labour.

How much will a resin driveway cost?

The cost of a resin driveway is typically around £2,400 in the UK, including aggregate, for a 40m2 area. Prices will differ according to the quality of materials and location. A resin drive will range between £40 to £70 per m2, with an average of about £60. Driveway installers use two main types of resin.

Do you need planning permission for a resin drive?

As resin bound driveways are permeable and SUDS compliant, they generally do not require planning permission. If rainwater can permeate the resin bound surface, rather than running off it onto the road, there should be no reason why a person may need to seek planning permission for a resin bound driveway.

Why do resin drives crack?

Cracks on a Resin Drive

If the incorrect mixture is used when making resin this may cause cracking in the surface. The problem can also occur if the incorrect amount of aggregate (stone) is used during the mixing process.

How do you maintain a resin driveway?

In order to remove leaves, sand soil and such like materials from resin bound paving, it can be swept clean with a stiff brush. Hosing the resin surface down with clean water will also clean the paving. It is common that regular brushing and washing is the only maintenance required for resin-bound surfacing.

Do resin driveways discolour?

Over time, you should expect your resin-bound driveway to discolour. The discolouration is something normal and shouldn't worry you that much. The resin interacts differently with some stones, which makes it discolour. Lighter coloured stones are particularly notorious for causing driveway discolouration.

What happens if resin driveway gets wet?

Weather conditions such as rain, humidity, dew, wet aggregate or any other ground moisture can present a big danger to your Resin Bound system. Moisture and resin react together instantly, producing gas bubbles which will appear as foam or clouding within the resin. It is critical that you avoid moisture at all costs.

What driveway surface is best?

Concrete. Among the most durable options on the market is a concrete driveway surface. Although it provides a hard and stable surface, that is highly dependant on professional installation, high upfront costs, maintenance, and weather conditions.

How thick should a resin driveway be?

The industry recommended thickness for resin bound stone is classified as being at least three times thicker than the largest grade of stone. In most cases, the largest grade of stone used would be 5mm and therefore making 15mm an appropriate depth.

Can resin driveways be repaired?

Patching of resin bound surfacing can create distinctive lines between new and old resin bound. By rejuvenating the existing resin bound surfacing, Vuba Resin Bound Sealer will help to create a more uniform surface across a driveway. Lines will still be visible, but the overall difference in appearance will be reduced.

Can resin be laid over tarmac?

Tarmac and concrete are the most suitable bases for resin driveways. The Resin Mill's permeable resin bound materials can be laid directly onto an existing tarmac surface if it is in suitable condition, or (after sufficient time), a newly installed one.

How soon can you walk on a resin driveway?

How long does resin take to dry? You are advised not to walk on our resin surfaces for a minimum of 24 hours after installation, although we recommend a minimum of 48 hours.

What is the cheapest way to do a driveway?

A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.

Which is more expensive tarmac or resin driveway?

Both tarmac and resin are great options for use as a driveway surface. Tarmac may be the better option if you're on a budget, as it is typically the cheaper of the two.

Are resin bound driveways any good?

Resin bound driveways and surfacing aren't the best choice for areas that regularly endure heavy traffic and usage. While this type of surface course is quite durable and robust, wear and tear over time can lead to cracking. This cracking can potentially lead to further and deeper damage.