What are rear trailing arm bushings?

The trailing arm bushing allows your car's rear trailing arms (which locate the rear suspension and tire) to move up and down over road surfaces and bumps, and allow for compression of the rear coil spring when the car is heavily loaded.

Are rear trailing arm bushings important?

Your vehicle won't stay in a straight line – Worn bushings or a broken trailing arm can cause the rear axle to move independently from the chassis. This causes vehicles to sway, as the rear wheels may actually change the direction of the vehicle.

How do you know if your rear trailing arm is bad?

What is the purpose of a rear trailing arm?

A trailing arm has a big job to do. First, it's got to provide an unyielding link between the chassis and the rear axle. Next, because the shocks are mounted to it, it must support the weight of the vehicle as well as the tension and compression forces generated between the rear wheels and the chassis.

Are trailing arm bushings important?

The trailing arm bushings are critical parts of your vehicle's suspension. If you notice any of the above symptoms, contact a local ASE certified mechanic so they can inspect and replace the trailing arm bushings if needed.

Honda/Acura Rear Trailing Arm Bushing Replacement

How much does it cost to replace trailing arm?

The average cost for trailing arm replacement is between $323 and $351. Labor costs are estimated between $106 and $133 while parts are priced at $217. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

How much does it cost to replace bushing?

The cost for a new bushing ranges between $5 and $150, while the average labor costs are between $100 and $300. This means you're looking at a total of between $105 and $450 for one bushing replacement.

Is it safe to drive with a broken trailing arm?

Cracked or bent trailing arms should be replaced. Driving with a cracked trailing arm could lead to separation of that side of the axle, and it's only a matter of time before further damage occurs.

What happens when bushings go bad?

When bushings wear, they allow more movement. The driver may feel a shimmy from the front of the vehicle, or hear clunking or rattling noises on rough roads, when turning the wheel or in hard braking. Drivers may also experience poor handling or loose steering.

When should you replace car bushings?

Can you drive with bad trailing arm bushings?

If your bushings are bad enough, it can cause the rear suspension parts to move from side to side while driving in a way that will mimic a steering issue.

Is it OK to drive with bad control arm bushings?

Drive with bad control arm bushings is not safe. Because when the control arms or bushings are worn or broken, the steering becomes unpredictable and dangerous for you and other drivers. Even if you keep the steering wheel straight, your vehicle may be driving randomly to one side.

How long does it take to change bushings on a car?

How many hours approximately does it take to change lower control arm bushings for this car? One side by the book time is 2.1 hour, but you must have special tools to remove bushings and press new ones in.

Is a trailing arm the same as a control arm?

For the rear of a vehicle with a solid axle, any style of control arms might be used to connect the rear axle to the frame or unibody. Most often, it is three or four control arms with rubber bushings on each end. These control arms are called "trailing arms" or "rear trailing arms".

What is difference between bushing and bearing?

Bushing is a cylindrical-shaped machine component, an independent plain bearing that is used to support a shaft. It is technically identical to a bearing except it's a single independent one-part device whereas bearing is mostly made of two or more components.

How many bushings are on a car?

Most cars use one or two control arms per wheel, on both the front and rear suspension, with each arm housing two bushings.

Is it hard to replace control arm bushings?

Some bushings can be difficult to replace and may need specialized tools. In this case, it can be more economical to replace the entire component rather than just the bushing. For example, some control arm bushings cannot be replaced separately, so the control arm will have to be replaced entirely.

What happens if rear control arm breaks while driving?

What if the control arm breaks? If the ball joints are worn out then you might be facing difficulty in aligning the vehicle on road. With major damage, there might be a possibility that you will lose control over the wheels, and in the extreme case, if the control arm breaks, the wheel could fall off the position.

What is the purpose of bushings on a car?

Suspension bushings are cushions made of several materials, among them being rubber and polyurethane. They are mounted on steering joints and vehicle suspension to control movement in the joints, absorb road bumps and reduce vibrations and noise.

What is the purpose of bushing?

Bushings, (sometimes called plain bearings, plain bushings, or sleeve bearings) reduce friction between two surfaces sliding against each other.

What is arm bushing on a car?

Control arms are what hold the wheels of the car in place and help dictate the steering movement of the vehicle. The bushings are what connect the control arms to the frame of the vehicle and help the wheels stay on the road through rough terrain.