What are continuity lines?

Continuity lines on the left side of a lane denote that the lane is about to end and that motorists must soon merge left. Continuity lines on the right mean that the lane will continue, but traffic may merge into it ahead.

What are lines on the road called?

White lane markings are the most common. Solid white lines define lanes of traffic going in the same direction, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes. Yellow lines show you where traffic is going in different directions.

What does the lines on the road mean?

A solid yellow line indicates that passing is prohibited. A dashed yellow line indicates that passing is allowed. White lines separate lanes for which travel is in the same direction. A double white line indicates that lane changes are prohibited. A single white line indicates that lane changes are discouraged.

What does yellow line indicate?

Yellow lines separate the opposite flow of traffic. A yellow solid line means pass with extra caution. This is probably the most misunderstood driving rule. Only a solid yellow line accompanied by another parallel yellow centre line, broken or solid designates a no-passing situation.

What is Edge line?

Edge lines delineate the edge of a roadway and/or travel lane. They can be used as a safety feature to provide road users with additional guidance around curves or over hills and are useful in adverse weather conditions, such as rain, snow, and fog.

15 - Traffic Lane Markings

What is barrier line?

A barrier line is a dividing line that replaces the single broken separation line to prohibit crossing movements from one or both directions. This guideline deals with the methodology for establishing unbroken separation/single barrier line, double one way and double two way barrier line markings and their setting out.

What are rumble strips meant for?

Rumble strips on the shoulders reduce run-off-the-road crashes by warning drivers they are leaving their lane. They are located just beyond the white line or the traveled portion of the roadway. As of 2009, over 35 states use shoulder rumble strips on their roadways.

What does a solid white line mean?

A solid white line has the same legal standing as a dashed white line, but it warns motorists that conditions might be more challenging (e.g. the road is narrow or has restricted visibility) or there is a hazard ahead such as a pedestrian crossing, an intersection or a sharp curve.

What does a single white line mean?

Single white line parking

Where the road has a solid, unbroken white line running along the side, parking is considered legal. In some cases, the single white line is there to indicate that there's no pavement – if this is the case then it's illegal to park there.

What does a continuous white line mean?

Bye-law 9 provides that a continuous white line along the centre of a roadway shall indicate that traffic must keep to the left of the line. Bye-law 10 provides that a broken white line along the centre of the roadway shall indicate that traffic must keep to the left of such line unless it can be crossed with safety.

What is the meaning of continuous yellow line in the road?

The yellow lines come in three types: the broken lane, solid (continuous) yellow and double solid lane. The broken yellow line simply indicates passing is permitted in either direction if there is ample passing distance. Motorists can also expect oncoming traffic in the lane to the left of the lines.

What is the line in the middle of the road called?

The median strip or central reservation is the reserved area that separates opposing lanes of traffic on divided roadways such as divided highways, dual carriageways, freeways, and motorways.

What are the 4 types of road signs?

What are the 3 types of road signs?

What is the white line on the right side of the road called?

The solid white line on the right side is called the 'fog line' used to help cars stay in their lane during foggy conditions and help pedestrians stay off the road.

What double yellow lines mean?

​​​​Signs and Signals > ​Road markings

Double yellow lines mean no waiting at any time, unless there are signs that specifically indicate seasonal restrictions. The times at which the restrictions apply for other road markings are shown on nearby plates or on entry signs to controlled parking zones.

What does red tarmac on road mean?

2 solid white lines

Sometimes, red tarmac is used within a block of white lines or diagonals. This is there to show you the area that's separating traffic moving in opposite directions.

What do double red lines mean?

"Double red lines mean no stopping at any time. "Single red lines mean no stopping during the day and times shown on the upright sign."

Can I unload on double yellow lines?

You can pull over on double yellow lines to drop off or pick somebody up, as long as there are no stopping restrictions.

Can you cross a continuous white line?

What does a continuous white line in the centre of the road mean? You must not cross the line.

What do diagonal yellow lines mean?

Definition. These markings, diagonal yellow lines, are on streets and highways indicating that the road is narrowing or there is an obstruction on the roadway. The area is similar to a triangle with solid yellow diagonal lines within the outside lines.

What does 2 Solid white lines mean?

Double white lines are two solid white lines that indicate a lane barrier between a regular use and a preferential use lane, such as a carpool/HOV. Never change lanes while in these lanes; wait until a single broken white line appears. You may also see these parallel lines in or near freeway on and off ramps.

What are the bumps between lanes called?

Botts' dots (turtles in Washington and Oregon or buttons in Texas and other southern states) are round non-reflective raised pavement markers. In many parts of the US, Botts' dots are used, along with reflective raised pavement markers, to mark lanes on highways and arterial roads.

What are the little bumps on the road called?

Rumble strips (also known as sleeper lines or alert strips) are a road safety feature to alert inattentive drivers of potential danger, by causing a tactile vibration and audible rumbling transmitted through the wheels into the vehicle interior.

What is a shoulder in the road?

A shoulder, hard shoulder or breakdown lane, is an emergency stopping lane by the verge of a road or motorway, on the right side in countries which drive on the right, and on the left side in countries which drive on the left.