What are Category 1/2 and 3 flammable liquids?

Category 1 shall include liquids having flashpoints below 73.4 °F (23 °C) and having a boiling point at or below 95 °F (35 °C). 2. Category 2 shall include liquids having flashpoints below 73.4 °F (23 °C) and having a boiling point above 95 °F (35 °C). 3.

What are Class I II and III liquids?

Class I liquids are the most hazardous from a fire safety standpoint, while Class IIIB liquids are the least hazardous. Class IA liquids are liquids that have flash points below 73 °F (22.8 °C) and boiling points below 100 °F (37.8 °C). Additionally, unstable flammable liquids are treated as Class IA liquids.

What is a Level 3 flammable liquid?

Class 3 “Flammable” liquids are those liquids with a flashpoint of not more than 140 degrees Fahrenheit, or any material in a liquid phase with a flash point at or above 100 °F that is intentionally heated and offered for transportation or transported at or above its flash point in a bulk packaging.

What is an example of a category 1 flammable liquid?

Examples of Category 1 Flammable Liquids include:

Diethyl Ether. Pentane. Ligroin. Heptane.

What is a Class 1 flammable liquid?

“Class I” FLAMMABLE LIQUID refers to any liquid having a flash point below 100°F and is. subdivided into three classes with some examples listed below: Class IA Flash point below 73 F, boiling point below 100 F. acetaldehyde. ethyl chloride.

Storage and Handling of Category 1 and 2 Flammables

What are Category 2 flammable liquids?

Category 2 shall include liquids having flashpoints below 73.4 °F (23 °C) and having a boiling point above 95 °F (35 °C).

What is Class 3 hazardous material?

Class 3 dangerous goods are flammable liquids with flash points no more than 60 celcius degrees. It covers liquid substances, molten solid substances with a flash point above 60 celcius degrees and liquid desensitized explosives.

Is diesel a Class 3 flammable liquid?

The UN upper limit for Class 3 is normally FP 60ºC, above which the material is not regarded as dangerous for transport. However, diesel came within the full scope of the Regulations recently. Beyond that, a flammable liquid is included in Class 3 if it has a FP above 60ºC and is carried at a temperature above its FP.

What is a Category 1 flammable gas?

Category 1 designates gases which at 20°C (68°F) and a standard pressure of 101.3 kPa (14.7 psi) are ignitable when in a mixture of 13% or less by volume OR have a flammable range with air of at least 12 percentage points regardless of the lower flammable limit.

Is kerosene a Class 3 flammable liquid?

This is a stable material that is flammable liquid (OSHA/GHS hazard category 3).

What does a flammability rating of 1 mean?

Level 1 – Materials that are normally stable, but become explosive at elevated temperatures and pressure. ◆ Level 0 – Materials that are stable even under exposure to fire. A chemical hazard rating at the highest level should be given to a room if chemicals are present in quantities of five (5) gallons or more.

What is a Class 2 material?

Class 2 dangerous goods are gases.

It covers compressed gases, liquefied gases, dissolved gases, refrigerated liquefied gases, mixtures of gases and aerosol dispensers/articles containing gas. There are 3 sub-divisions: Division 2.1: Flammable gases. Division 2.2: Non-flammable, non-toxic gases.

What is a Class 2 Division 2.1 hazardous material?

Class 2 – Compressed Gases (49 CFR 173.115)

Division 2.1 - Flammable Gas – A material that is a gas at 20º C or below and. 101.3 kPa of pressure (ambient temperature and pressure), i.e. the material has a. boiling point of 20º C at sea level and: • Is ignitable when in a mixture of 13 percent or less by volume with air ...

What is a Class 1 gas?

The NEC Division Classification Systems uses Classes and Groups to identify hazards: Class I represents gases & vapors. Class II represents explosive dusts. Class III represents hazardous (flammable) fibers.

Is propane a Class 1 liquid?

Class B fires are fueled by flammable liquids such as gasoline and gases like propane.

What are the 3 classifications of hazards?

Hazard group – While not given a formal definition, GHS divides hazards into three major groups – health, physical and environmental. Class – Class is the term used to describe the different types of hazards. For example, Gases under Pressure is an example of a class in the physical hazards group.

What is the meaning of flammable gas 2?

Class 2, Division 2.1 Flammable Gas is defined as Gases which, at 20 °C and a standard temperature of 101.3 kPa, are ignitable when in a mixture of 13% or less by volume in air. Examples: Acetylene, Natural gas, and Liquified Petroleum Gas (LPG).

Does Class 3 have divisions?

Some of the classes can be further divided into divisions, e.g., Class 1, while others do not have sub-divisions, e.g., Class 3.

Is motor oil a Class 3 flammable liquid?

Engine oils normally have a flash point greater than 150 °C. This means that they're not a Class 3 Flammable Liquid, as flammable liquids must have a flash point below 60 °C. Therefore, engine oils are classed as combustible liquids.

What is a Class 1 chemical?

What are Class 1 dangerous goods and why are they classed as dangerous? Class 1 goods are products that possess the ability to alight or detonate as a consequence of a chemical reaction. Explosives are classified as a hazardous product for a pretty clear reason – they can explode.

Is Class 3 flammable liquid subdivided?

Class 3: Flammable Liquids

There are no sub-divisions for Class 3 Flammable Liquids.

What is a Class 1 Division 1.1 hazardous material?

341.11 Class 1 Divisions

Division 1.1 consists of explosives that have a mass explosion hazard. Examples are black powder, nitroglycerine (desensitized), dynamite, most types of torpedoes, and mercury fulminate. Division 1.2 consists of explosives that have a projection hazard but not a mass explosion hazard.