What are 3/4 extension drawer slides?

3/4 Extension Drawer Slides

¾ Extension ball-bearing slides provide a partial opening for drawers or compartments. Limited space or light capacity storage areas are suited for the ¾ extension slide models.

What does full extension drawer slides mean?

Full-extension means that the drawer box extends out from cabinet the full length of the slide. ''Over-travel'' means that the drawer box travels entirely out of the cabinet by an inch or so, useful for accessing items at the back of the drawer.

What are the different types of drawer slides?

How do I know what size drawer slides to buy?

Start at the back of the box and measure to the front of the box without including the face of the drawer. Once you have the length, round the number down. For example, if the drawer is 20 ½ inches long you will need to purchase 20 inch drawer slides.

How thick are full extension drawer slides?

These slides have a thickness of 1.2 x 1.2 x 1.5". these drawer slides are great for replacing old or worn slides in your home, office or school. Recommended for use on cabinet doors, bedroom furniture, bathroom cabinets, and office cabinets.

Drawer Slides EXPLAINED – How to choose the right drawer slide

How wide are drawer slides?

Drawer boxes for side-mount slides should be 1” - 1-1/16” narrower than the opening. The larger dimension will give you a little room to adjust the slides if necessary. Drawer boxes for under-mount slides need to be 3/16” - 5/16” narrower than the opening, depending on the thickness of the drawer material.

How long are full extension drawer slides?

Full Extension Drawer Slides, from 8 to 60 inches Long.

Can a drawer be longer than the slides?

You should always use the longest slide possible for your application, without exceeding the drawer depth into the cabinet. The Height of a Drawer Slide is usually only a limiting factor, in the sense that you can't install a slide that is taller than your drawer or pull-out.

What is the difference between bottom mount and side mount drawer slides?

Side mounts are connected on the side of the drawer and cabinet. Bottom mounts are attached to the bottom of the drawer and side of the cabinet. Meanwhile, undermounts are two slides attached to the underneath (invisible) of the drawer and side of the cabinet.

How do you measure drawer size?

Begin by measuring along the bottom floor of the drawer at the back edge, middle, and front edge. Check for variations across the height of the drawer as well. Take the smallest of these measurements. Repeat this step for the depth measurement on the left edge, middle, and right edge across the floor and the height.

How do I identify a drawer slide?

Measure from the back of the drawer-front to the end of the drawer box. Only measure the box, do not include the drawer front. Round the measurement off to the lower number on the tape. For example, when the measurement is 22 1/2 inches, you need to purchase 22-inch drawer slides.

What kind of slides do you use for dresser drawers?

What are 3/4 extension drawer slides?

3/4 Extension Drawer Slides

¾ Extension ball-bearing slides provide a partial opening for drawers or compartments. Limited space or light capacity storage areas are suited for the ¾ extension slide models.

What is the main advantage of using full extension drawer slides?

Full extension drawer slides are usually the most desirable. This type of extension slide allows full access to the drawer while keeping it tucked into the cabinet, resulting in a nice, clean, finished look.

What size drawer slides for a 21 cabinet?

Similar to a kitchen cabinet, and with the standard vanity top depth at 21-inches, you'll find the finished depth of vanities mostly support a 16 or 18-inch drawer slide.

What is better undermount or side mount drawer slides?

Undermount drawer glides versus side mounts: sanitation

Because they are underneath the drawer, undermounts do not collect dust as side mounts do. With side mounts, any time the drawer is open, bearings are exposed to dust, dirt and grime. The dirtier side mounts get, the less efficient and sanitary they are.

Can full extension drawer slides be mounted horizontally?

While most slides are designed to be vertically mounted, some slides can be horizontally mounted beneath the unit, for example for linear slides such as the DA0116-RC and DA0115RC can be installed in this position.

Can side mount drawer slides be used as bottom-mount?

Additionally, side mounts are built to carry a limited load, and if it is used as an undermount, there is a huge possibility that it might bend and malfunction. So for these professionals, the answer to the question “Can you use side mount drawer slides as undermount” will always be no.

Can a drawer slide be shorter than the drawer?

If your drawer box is 16" you would order a 16" drawer slide. If the drawer measurement is slightly off and is just a tad shorter than the full 16" (as an example) 15 -3/4", you would order the next size shorter to ensure the drawer will fully close.

What are overtravel drawer slides?

Full extension - Drawers come out just at the end of the cabinet with full extension slides. Full extension slides allow for complete access to the cabinet. Overtravel - Overtravel drawer slides come out past the end of the cabinet, which allows for complete access to the cabinet and then some.

How much weight can drawer slides hold?

Most drawer slides are rated at 75, 100, or 150 pounds. However, some ball-bearing slides can hold up to a 500-pound load. Knowing how heavy a load you need to support may help filter out your choices, and narrow down your choices to those that are most specific to your needs.