Should you cover your pool after you shock it?

Never close the cover immediately after shocking the pool. It is recommended to wait several hours before closing the cover. Use a test kit to regularly test the pool water. If the tests results are good, this does not imply the water chemistry was good prior to your current test results.
Takedown request   |   View complete answer on lathampool.com


What do you do after you shock your pool?

Brush the pool vigorously, several times after shocking the pool. Do not use a solar blanket until chlorine and pH level are normal. If chlorine level drops to zero within 24 hours, Repeat the shock treatment. Improve filtration with a pool filter cleaner or filter aid like Jack's Filter Fiber.
Takedown request   |   View complete answer on blog.intheswim.com


How long after shocking pool can you put solar cover on?

5. Can I put my solar cover on right after adding chemicals? While you can safely put your cover back on the pool right after you've added chemicals, it's always best to wait 30 minutes to an hour, just to help your cover last longer.
Takedown request   |   View complete answer on poolcareguy.com


Will Shock hurt a pool cover?

Pools need to be shocked for closing, but chlorine shocks ruin pool covers and solar covers. If you use a chlorine shock, give the pool 24 to 48 hours for the shock to wear off before closing.
Takedown request   |   View complete answer on seasonalstores.com


Can you put chemicals in pool with cover on?

You want some clear area between the edge of the pool and the cover to pour chemicals. You don't need to remove the cover, you just need enough room so you aren't splashing any full strength chemicals on the cover. When you are done with the chemical addition you can pull the cover back into place.
Takedown request   |   View complete answer on troublefreepool.com


How Often Should You SHOCK Your POOL? | Swim University



Should you leave a pool cover on during the day?

In dry and/or windy conditions, the evaporation rate of the pool increases. Therefore, it is generally beneficial to have a transparent or bubble cover on during daylight hours. In warm, humid conditions the evaporation rate decreases. In this case, it may be more beneficial to leave the cover off during the daytime.
Takedown request   |   View complete answer on energy.gov


Should I cover my pool every night?

Minimizes Evaporation

Using a pool cover overnight can reduce evaporation. Plus, the cover will trap accumulated moisture, and it'll naturally go back into your pool. You'll be rewarded with a more consistent water level and maybe even a lower water bill.
Takedown request   |   View complete answer on sandiegopools.com


How long should you wait after shocking your pool?

After Shocking Your Pool

It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!
Takedown request   |   View complete answer on intheswim.com


Does pool shock work in cold water?

The cold water, anything below 65°, has an impact on the ability of the chemicals to dissolve properly. I would recommend using liquid chlorine if you have to shock in lower temperatures. You can dissolve granular shock in warm water. Perhaps it will work if you completely dissolve it before adding it to the pool.
Takedown request   |   View complete answer on inyopools.com


Can you shock a pool with solar blanket on?

Solar Cover Use

There are times when you should not use a solar cover. Remove the cover during heavy storms and wind events, to prevent damage from flying debris. Remove the cover before shocking a pool, and leave it off until chlorine levels drop below 2.5 ppm.
Takedown request   |   View complete answer on blog.intheswim.com


Does leaving a pool cover on cause algae?

So while a solar cover won't actually 'turn your pool green', it will warm your water by up to 8 degrees, so if the other conditions are right, adding a solar cover can easily accelerate algae growth, very rapidly. You need to get the water balance in your pool right before putting the cover back on.
Takedown request   |   View complete answer on abgal.com.au


When Shocking a pool should the pump be on?

Prepare shock ahead of time in a 5-gallon bucket of pool water and stir. Ensure the pool pump is running. Pour the mixture from the bucket into the water around the edges of the pool. Let the pump run for about 6 hours or more and test the water.
Takedown request   |   View complete answer on blog.hayward-pool.com


How long does pool shock take to work?

Always run the pump when shocking the pool and allow it to circulate for 24 hours. The water should then be a blue or cloudy blue color. Test the water 24 hours after shocking and start adjusting pH and alkalinity levels. The chlorine will still be elevated, but over a few days, it should stabilize.
Takedown request   |   View complete answer on dengarden.com


What happens if you swim in a shocked pool?

What Happens If You Swim In A Shocked Pool? If you do not wait for the chemicals used to shock a pool to totally dissolve then you could be placing yourself in serious danger by swimming in it. At the minimum, you will feel itchy skin and eyes because of the chemicals present in the water.
Takedown request   |   View complete answer on triathlonbudgeting.com


Why did my pool turn green after I shocked it?

Pools can immediately turn green after shocking when they have metals like copper in the water. These metals oxidise when exposed to high levels of chlorine which makes the pool water turn green. Adding a metal control product such as Zodiac Metal Remover will help to restore the pool water.
Takedown request   |   View complete answer on zodiac.com.au


How do I make my pool water crystal clear?

In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.
Takedown request   |   View complete answer on c-m-p.com


Can you shock a pool without the pump running?

Can You Use Pool Shock Without A Pump? Depending on the type of pool and chemical levels, it may or may not be suitable to use. Without a pump, your pool will continue to function normally for a few days. However, keep in mind that a standard pool must be used at least once every 24 hours or an algae bloom will occur.
Takedown request   |   View complete answer on blacktailnyc.com


What is the difference between shock and chlorine?

Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.
Takedown request   |   View complete answer on splashpoolsupply.com


How do I keep algae out of my pool in the winter?

Follow these steps to keep algae from invading your pool in the winter.
  1. Take preventive measures. Before you close the pool for the winter, give it a good cleaning. ...
  2. Keep it covered. ...
  3. Make sure the cover is clean. ...
  4. Balance the chemicals. ...
  5. Give it a shock. ...
  6. Keep the filter running- at least part of the time. ...
  7. Pay attention.
Takedown request   |   View complete answer on millenniumpool.com


How long after putting chlorine in pool Can you swim?

Liquid Chlorine: Depending on how much you have added and the size of your pool, it is generally safe to wait about 4 hours after adding liquid chlorine or until levels reach 5 ppm or lower. After Shocking Your Pool: It is safe to swim once your chlorine levels reach 5 ppm or lower, preferably at 3 ppm.
Takedown request   |   View complete answer on bdpsorlando.com


How long can I leave my pool cover on?

The cover should not be continually left on for more than 7 days continuously. Pool covers are very effective at reducing chemical usage. Make sure you continually monitor the water quality and quantity of chemicals required to maintain water chemistry within the recommended levels.
Takedown request   |   View complete answer on sapphirepools.com.au


Is it OK to run my pool pump 24 hours a day?

A Rule of Thumb

Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.
Takedown request   |   View complete answer on poolsuppliescanada.ca


Should you run your pool filter during the day or night?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
Takedown request   |   View complete answer on teddybearpools.com


Does a pool get hotter with the cover on or off?

Air bubbles in the pool cover act as an insulator in a similar way that your thermos would keep water warm. A pool cover will, therefore, keep your pool water warmer for longer.
Takedown request   |   View complete answer on regalpooldesign.com


What is a comfortable temperature for a swimming pool?

Depending on its purpose, competitive swimmers would prefer a cooler water temperature, whereas young children and senior citizens would benefit more so from warmer temperatures. Despite this, the average pool temperature, which is said to be ideal for all, is between 77-82°F.
Takedown request   |   View complete answer on moreheadpools.com