Should wood fence posts be set in concrete?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

Do you set fence posts in concrete?

Good fences start with good foundations. Installing fence posts in place with concrete is the best way to guarantee that they remain upright and unmoving, but you might not relish the idea of mixing batch after batch of concrete to fill each posthole.

Should pressure treated posts be set in concrete?

With pressure-treated posts, the rot will be slow. We have three ways to solve the rotten post problem. First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel. Concrete should be poured around the post - no concrete under the post.

How do you keep fence posts from rotting in concrete?

Fill the first three inches up with gravel so the end of the post doesn't come into contact with the dirt. Gravel allows water to drain quickly away from the post and into the soil. Be sure to place the post in the center of the hole. Finally, fill the entire hole up with cement to the top.

Should you put gravel under fence post?

If a fence post fails without any sign of a pest infestation, it's likely that the failure was caused by moisture that rotted the wood over time. To help slow such deterioration, add pea gravel or crushed stone to the bottom of the posthole.

How to set a fence post in concrete

Can you put pressure treated wood directly on concrete?

So, can you put pressure treated wood directly on concrete? Yes, you can.

What do you put between wood and concrete?

Anyplace where wood meets the ground or concrete, the lumber must be pressure treated. For additional moisture protection, a gasket or strip of closed-cell foam can be installed between the concrete foundation and the sill plate.

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post's aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

How long will a treated 4x4 post last in the ground?

A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil. There are a few factors that influence how long the 4×4 can last in the ground.

How long will a wood post in concrete last?

A PT post will last a long time in concrete, maybe 5 to 10 years in soil alone. I suggest you embed the post in concrete, trowel a peak around the post so water runs off, and don't let the PT post come in contact with the ground.

Does concrete make wood rot?

With concrete holding the moisture against the wood, wood has no chance and will eventually lose the battle. Now you don't have to lose all hope because it's for certain that the concrete around the post will crack, therefore making it easy to pull out when it starts to rot.

Why deck posts should not be set in concrete?

Deck Posts Will Rot When Set in Concrete

The concrete around the post is acting as a bowl holding water. Just like a concrete swimming pool holds water, so does concrete around a deck post. The rain falls and collects on top of the concrete with no place to go except into the post.

How do you protect wooden posts in the ground?

Placing a thick layer of loose gravel at the bottom of the post hole will allow groundwater to trickle through the rocks and down away from the base of the post. This will prevent the post from rotting by keeping it constantly dry. You can purchase gravel at a local hardware store or landscaping-supply business.

Can you set fence posts with dry concrete?

Fast-setting concrete is ideal for setting posts because there's no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

How deep should a 6 foot fence post be in the ground?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. Then compact and level the gravel using a post or 2x4.

How many bags of concrete do you need for a fence post?

Most fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

How deep should a 8 foot fence post be in the ground?

How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you'll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone. For gateposts, you'll need concrete too.

How do you keep wood from rotting in concrete?

Consider Adding Posts to Concrete

From here, you should fill the hole with about 6 inches of gravel. This will prevent rotting by ensuring that the post is kept dry when water makes its way into the soil. Place the post in the gravel, then fill it with a batch of cement until it reaches the top of the hole.

Can you put pressure-treated wood directly on the ground?

Pressure-treated wood is softwood lumber, typically southern yellow pine, that's been chemically treated to resist rot, decay and termites. Lumber treated to “Ground Contact” has a high chemical retention level and can be placed directly on or in the ground with better protection against rot or decay.

Do you need moisture barrier between wood and concrete?

A common question that DIYers ask is, "I'm installing a new floor on-grade, a cement slab. Do I need a vapor barrier for hardwood floors?" The answer is YES! Moisture can destroy hardwood flooring. It causes cupping, warping, and even mildew if not treated.

Should you wrap fence posts in plastic?

The main reason to wrap the in ground portion of a wooden post in plastic is not to prevent water getting in but to provide a slippery surface so that the post can not be pushed up by frost in the ground. Gravel at the bottom of the posthole is a must for drainage.

How long will a pressure-treated post last?

Pressure-treated wood can last up to 40 years. This lifespan could be more or less depending on the type of wood, what the treated wood stakes are used for, how well it is kept, and the climatic conditions. With additional protection, pressure-treated wood can last well up to 70 years without any sign of decay or rot.