Should lockshield valves be fully open?

Most lockshield valves have a plastic or metal cover. You should remove these and open all of the lockshield valves completely. This requires that you turn them anticlockwise. You should also fully open the TRVs (thermostatic radiator valves).

Can a lockshield valve be fully closed?

On most radiators, this is the valve you can't turn by hand. By closing a fully-open lockshield valve by a few turns (with a pair of grips or screwdriver), you can slow down the rate at which water enters the radiator and reduce the speed with which it gets hot.

Should both radiator valves be open?

You should open both of the valves on all of your system's radiator when you are starting the radiator balancing process. You will most likely need to use pliers to open the lockshield valve.

What position should a lockshield valve be?

The lockshield valve should be set to a degree that will allow the radiator or radiators to maintain their desired temperature.

How much should lockshield be open?

You should open the Lockshield valve on the first radiator by one-quarter of a turn. Now open the Lockshield valve on the last radiator on your list. Each radiator in between should have its Lockshield valve opened slightly more than the previous radiator.

We always thought Lockshield Valves were the SAME!!? WHO KNEW!?

What is the purpose of a lockshield valve?

The Lockshield valve restricts hot water flow to radiators to help balance the entire system as a whole. Other radiator valves can be used to help adjust the temperature of a radiator to help heat or cool a room.

Why are some of my radiators hotter than others?

Some radiators occationally get quite a bit warmer than others. When this happens it usually means that your central heating system is out of balance. In some instances, radiators can be different temperatures due to the distance that water that heats them has to travel from the boiler or pump.

How do I know if my radiators need balancing?

If you have hot and cold spots on some of your radiators or find that some radiators get warm whilst others do not, then your radiators need balancing.

What is the best way to balance radiators?

Do you bleed a radiator when it is on or off?

Turn off your heating. You can't bleed a radiator when the heating is on, as it may be too hot to touch. You could also get hot water spraying out of the radiator. Use your radiator key to turn the valve at the top of the radiator.

Should you be able to touch radiators?

A too-hot radiator can also damage furniture, if the furniture is pressed up against it and while not an out and out fire hazard, flammable materials coming into contact with something very hot is not worth risking and is best avoided.

Why do my radiators constantly need bleeding?

All radiators require bleeding to remove air bubbles that form periodically during the life of a system. Air can be introduced into a central heating system in several ways. It can occur when new water enters the system from the expansion tank or when a routine maintenance is carried out.

Which radiators do you bleed first?

If you are bleeding more than one radiator at a time, ensure your central heating is fully switched off before proceeding. In a standard house with more than one floor, the first radiator to bleed should be the radiator downstairs on the lowest floor and the furthest away from the boiler.

How does a radiator lockshield work?

A lockshield valve is the valve on a radiator that is usually covered with a plastic cap. Lockshield valves need to be adjusted when balancing home radiators in individual rooms. A lockshield valve will balance out each radiator within your heating system, ensuring they all heat up at the same rate.

Do I need lockshield valve?

A lockshield valve helps to balance out that radiator and ensure the whole system is in sync, with all radiators heating at the same rate. It is therefore every bit as important a valve as without the system being balanced, there is often little point adjusting an individual temperature valve.

What do the 2 valves on a radiator do?

Each radiator will have two valves. One will control the amount of hot water that enters the radiator and the other will balance the system by controlling how much heat comes out of your radiator. This is known as the 'lockshield valve'.

Why is 1 radiator in my house cold?

Why is one radiator cold when the heating is on? One cold radiator usually indicates that either there is air in the system or there is a stuck valve within that radiator. The thermostatic radiator valve (TRV), like the one pictured below, controls the flow of hot water to the radiator.

Why are my radiators cold at the bottom?

Why Is My Radiator Cold At The Bottom? A radiator that is cold at the bottom is usually caused by a build up of sludge in the system. This sludge is mainly composed of rust and dirt particles which accumulate from internal corrosion.

Why are some of my radiators cold?

If just one (or a few) of your radiators aren't heating up, the most common reason for this is trapped air. If you've just turned the heating back on after the summer, air can become trapped in your radiators, causing them to be warm at the bottom but cold at the top.

Should radiators heat from top to bottom?

We all know that heat rises, so having a radiator that's cooler at the bottom than the top might not seem like cause for alarm. However, radiators are designed to emit heat evenly once your central heating has kicked in - they should never be colder at the top or cold at the bottom once the system is up to temperature.