Should I wash my car before tinting windows?

For any kind of window tinting, you must ensure that the windows are completely clean. Having clean vehicle windows allows you to receive a more accurate and long-lasting installation. Your car tint installer will clean the glass and everything that surrounds it before installing the tints.

How long should I wait to wash my car after tint?

Answer provided by

Washing your car too soon after installing a window tint can cause damage to the tint job. That said, it's best to wait for at least 3 days, or 72 hours before washing your car. Window tint has an adhesive backing that takes a few days to dry.

Can you wash your car after tinting your windows?

You can wash your car to your heart's content and never have to worry about the tinting in your windows. This is because when the tinting film is applied it is placed on the inside of car windows – not the outside. This gives them a much longer life because they are not exposed to the elements.

What if it rains after I tint my windows?

Since it has not been explicitly stated in this thread... In case you are unaware, the tint is applied to the inside of the glass so there is no way rain will harm it in any way. You shouldn't wash/clean the inside of the glass for a certain period of time so that you do not cause the tint to shift.

How long does it take for tint to cure?

The drying time will depend on the weather and season.

During the summer, the sun will help your vehicle's film cure (or dry) within two to four days of a window tint. But if you get this service in the winter, you might have to wait three to four weeks before your car's window tint completely dries.

What you should know before you get your windows tinted

Does window tint get darker after a few days?

The tint on your window does appear to get darker over the first few days or weeks after installation, but the key word here is “appear”. In actual fact, the tint remains the same shade. It's the adhesive that changes. From there on out, your tint will ever so slowly get lighter as a result of sun bleaching.

What is the best tint percentage?

A car window tint percentage of 50% is effective in keeping out UV rays and heat. It blocks half of the light, thus reducing glare and eye strain. If you're looking for a stylish and smooth look for your mobile car, the best window tint percentage is 35%. It gives off a darker appearance without sacrificing visibility.

What can you not do after getting your windows tinted?

Can I use Windex to put on window tint?

Windex can immensely harm tinted windows causing streaks in the tint, making the tint purple, and can also damage it over time and that is the reason it is advised not to use it on the painted side.

How do you make a window tint slip solution?

Squeeze five to ten drops of baby shampoo (or liquid soap) into a one quart spray bottle. The quantity of soap needed is dependent on the amount of lubrication (“slip”) that you need and want. Novice installers typically need more soap, this way making it more slippery.

How long do I have to wait to roll my windows down after getting them tinted?

We recommend that you leave your vehicle windows rolled up for at least 24 hours after window film has been installed. This allows the film to cure and adhere to the glass before the window is moved.

Will small bubbles in tint go away?

It's common to see small bubbles under freshly-installed tint. Normally, these bubbles should go away within a couple of weeks and should be very small. They may take longer to go away in cold weather and vanish faster in heat.

Can you smoke in car after getting windows tinted?

Harmful effects of smoking on window tints

Perhaps, the destructive effect that smoking can have on a window tint is the burn marks that form after a time. Even if you roll the window down, there is a chance that burn marks will develop on the windshield of your car.

Why you shouldn't tint your windows?

Although tinted windows can definitely protect your eyes from the sun, it can also impede your vision on very cloudy or rainy days, and seeing outside through heavily-tinted windows is very difficult.

What is the darkest legal tint?

Window Tint Darkness

The 2022 California window tint laws requirements are for the front windshield and front side windows to have a 70% VLT. California car window tint law has no restriction on how dark the tint on the rear and back side windows can be.

Is it bad to get windows tinted in winter?

Most window tinters cannot accommodate tinting windows in the Winter. Window tint film is extremely temperature sensitive, even a few degrees below room temperature makes installation more difficult and can result in a poor quality tint job.

Can you use defrost after tinting windows?

The short answer is, yes you can! The long answer is as follows. Defroster wires get very hot to help you quickly regain visibility in the winter months. This heat does not damage modern window films because of huge gains in the technology surrounding window film manufacturing.

Do ceramic tints get darker?

Is Ceramic Window Tint Darker? While ceramic window tint isn't actually darker than its counterparts, there are a lot of different factors that create this perception. Ceramic window tint tends to stand up to the elements a lot better than the other types of tint, which means it does often stay darker for longer.

Does tint cure faster in hot weather?

In summer, hot air can make the tint cure faster, which is good. However, high humidity levels make tinting difficult to install. In winter, you may not be able to have your window tinting installed because the cold weather increases the curing time significantly.

What temperature can you tint windows?

Apply the tint when the air temperature is between 40 and 98 degrees Fahrenheit (4.4 and 36.7 degrees Celsius). Be careful not to crease the film. Wet your fingertips to avoid getting fingerprints on the film.

Can you put tint over tint?

It is not advised to install window tint over existing aftermarket window tint. Tinting over tint is not a great idea for quite a few reasons. The adhesive in window tint is meant to adhere to glass, not other window film so it is best to remove any existing window film before applying new tint.

Is it normal to have bubbles in new tint?

Bubbles in the window tints are normal after a few hours of installation. But, if your window tints still have bubbles after two weeks, this is a sign of poor quality installation. Bubbling can also occur if your window tints are losing its adhesive properties.