Should I use 5w30 or 10w40?

The 5w30 oil will flow better at low temperatures than the 10w40 oil. This means that the 5w30 oil will protect the engine better at low temperatures, usually when the engine is just starting or during weather conditions such as winter.

Is it OK to use 10w40 instead of 5w30?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Is 10W-40 too thick?

A low viscosity oil will move quicker through the engine to keep it lubricated and cool. Additionally, if your engine has a lower running temperature, 10W-40 motor oil might be too thick. Its higher viscosity at running temperature can reduce engine effectiveness as it'll need more energy to keep the engine operating.

What is the advantage of 10w40 oil?

Very good low temperature properties. Protection to wear by cold start. Very high thermal and oxidation stability. Excellent resistance against foaming, corrosion and wear.

Is 10w40 good for high mileage?

Mobil 1 High Mileage 10W-40 motor oil is recommended by ExxonMobil for use in high mileage vehicles (even those that have used lower quality conventional oils^†), including: Cars. Trucks.

Speed test | 5w30 vs 10w40

Will thicker oil damage my engine?

It's best to use the oil viscosity recommended in the owner's manual, but using a slightly thinner or thicker oil (lighter or heavier viscosity) generally poses no long-term harm.

Is 10W40 good for summer?

They are both available in pure conventional form or as high-quality synthetic grades. Either 10W30 or 10W40 for summer use is fine; however, 10W-40 motor oil will better protect your engine.

Is 5W better than 10W?

A quick lesson in motor oil states that a regular engine needs oil that flows under the prevailing weather or running conditions. A 10W or 5W is the index for how easily the oil flows in winter (hence the W). A 10W oil thickens more than a 5W.

When should I use 5W 40?

5w40 is better for starting your engine at low temperatures as it flows more easily in this environment. When the engine is running and hot, the differences are negligible; 5w40 and 10w40 both have high viscosities and are equally effective in protecting against engine wear.

Is 10W40 thicker than 5w30?

This means that the 5w30 oil will protect the engine better at low temperatures, usually when the engine is just starting or during weather conditions such as winter. At high temperatures, the 5w30 oil is thinner than that of 10w40 since 30 is lower than 40.

What is 10W-40 used for?

Higher viscosity oil such as a 10W-40 can be useful for older engines burning or leaking oil. We offer Mobil™ 10W-40 high viscosity motor oils for use in vehicles with more than 75,000 miles, and a synthetic blend oil when cost is a consideration.

Is 10W40 fully synthetic?

Semi-synthetic oils such as 10W40 have long been the standard. Their base is refined crude oil, which is then blended with additives.

Is Thicker oil better for high mileage cars?

The slightly thicker oil film from the heavier base weight oil - 10W - can help protect worn engine bearings as well. As long as you're not hearing knocking or serious mechanical noises from the engine, the heavier oil should buy you many more miles of service from your vehicle.

Will the wrong oil damage my engine?

Cause damage to engine life

The wrong engine oil can cause engine damage because it does not properly lubricate its components. This will lead to metal-on-metal contact since the moving parts are not being lubricated. Friction quickly follows, causing engine parts to wear.

What is the best engine oil for hot weather?

There are a few ways to get your car prepared for summer with synthetic oils. If you're capable of changing your oil, you can find synthetics at auto retailers. Look for containers with codes such as 0W-20, 5W-20, and 5W-30. These correspond to specific synthetic oil mixtures approved for standard vehicles.

Is 5w30 good for summer?

5w30's viscosity range means it can lubricate, seal, and protect an engine's internal components in a range of climate conditions. This ability to function well both in summer and winter brings with it the convenience of not having to change oil weights with the seasons.

When should I use 5w30 oil?

5w30 oil is particularly well suited for cars driven in cold climates. Unlike oils with a higher hot temperature rating such as 10 or 15, 5w30 oil can flow freely enough when the engine is started at low temperatures to coat and protect the engine's internal components.

Is 5W or 10W better for summer?

While some car manufacturers still advocate the use of 10W-30 (or even 10W-40) as an appropriate engine oil option for summer use, it is completely unnecessary. Today's 5W-30 motor oils provide consistent protection at both extremes of the temperature spectrum.

Should I use 5W-30 in winter?

An example is 5W30—the “W” stands for winter and the oil's cold weather rating. The lower the W number, the better the oil will perform in colder temperatures. Typically, a 5W oil is recommended for winter use, but synthetic oils can be formulated to flow even more easily when cold.

Is 5W-30 good for winter?

The second number is the high-temperature viscosity rating, measuring how well the oil protects you engine in those conditions. So, a 5W-30 or 0-W30 will give better protection in winter weather than, say, a 10W-40 or a 20W-50, while still providing solid high-temperature protection.

What is 5W 40 oil used for?

5W-40 motor oil

The 5W-40 viscosity is a prevalent recommendation for performance engines in European vehicles with gas-powered engines, and in American diesel pickup trucks. We offer 5W-40 oils for gasoline- and diesel-powered engines.

Is 5W30 better for older cars?

5W-20 and 5W30 motor oil are winter viscosity grade oils primarily recommended for older engines and light-duty use. These oils are best utilized in colder temperatures.

What oil is better for older cars?

Monograde oils are still widely available, primarily because they're used in very hot climates, or in heavy-duty applications such as mining or construction equipment. These single-grade oils can be used in 1950s and older cars – generally SAE 30 to SAE 50 – but most owners use multi-grade.

What's the best oil for older cars?