Should I put chlorine tablets in my well?

Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well. Don't use stabilized swimming pool chlorine products or non-chlorinated “pool shock” products, as they are not effective enough to clean your drinking water.

Should you add chlorine to well water?

Shock chlorination is recommended: upon completion of a new well or when an unused well is returned to service. if annual water test results indicate the presence of bacteria. if a well system is opened for any installation, repair or maintenance.

How many chlorine tablets do I put in my well?

For a 10-foot well use 2 tsp. of a chlorine tablet, for a 20-foot well use 1 1/2 tbsp. of a chlorine tablet, for a 40-foot well use 3 tbsp. of a chlorine tablet and for an 80-foot well use 4 1/2 tbsp.

How long do chlorine tablets last in well?

Used properly, chlorine tablets should last about one week before they dissolve and new tablets are needed, but pool chemistry will ultimately tell you if you if the application rate is correct.

What happens when you add chlorine to well water?

Chlorination, or "shock chlorination", is the process of flushing your well and water system with a chlorine solution to kill bacteria and other microorganisms. Disinfection by chlorination is usually recommended if a water sample from the well has tested positive for bacteria.

Disinfecting Well/Water System: How Much Chlorine to Use

How often should I chlorinate my well?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria.

How long should you wait to drink water after you chlorinate a well?

Allow chlorinated water to stand in the well and pipes for at least 8 hours (preferably 12 to 24 hours). Run water from outdoor faucets to waste (away from desirable vegetation) until the chlorine odor is slight or not detected at each faucet. Then run indoor faucets until there is no chlorine odor.

Is it better to use liquid chlorine or tablets?

Liquid chlorine is a much better choice than tablets for shocking. It is going to go to work right away and get your chlorine levels high in a short time. Saying that, it is an expensive way to do it. Calcium Hypochlorite (cal-hypo) is a much more cost effective way.

Do chlorine tablets raise pH?

So, chlorine tabs lower pH and Total Alkalinity and increase cyanuric acid levels.

How many gallons does a 1 inch chlorine tablet treat?

Tablets typically come in two sizes—3-inch chlorinating tablets, which are typically best for larger swimming with a volume of 5,000 gallons or more. Or, 1-inch chlorinating tablets, which are best for smaller pools that are less than 5,000 gallons.

How do you know if your well water is contaminated?

What is a natural way to clean well water?

You can boil the well water for 5 minutes. With this, all the bacteria inside it will be eliminated. However, boiling will not be able to remove the solids and other materials inside the well water. The use of chlorine drops or iodine tablets can effectively kill the bacteria in the well water.

What happens if you put too much bleach in well?

According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.

How often should a well be cleaned?

9. As a routine maintenance practice, clean your well at least once a year. If you have an iron or sulfur bacteria problem, clean more often.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

What can I use instead of chlorine tablets?

There are alternatives to chlorine including bromine, ionizers, and ozonators, though with each you'll still need to use some chlorine. A fourth alternative is PHMB, which doesn't require the use of any chlorine. All four have drawbacks, including cost.

Does chlorine make water more acidic?

High chlorine levels decrease the pH of your pool's water, making it more acidic. The more acidic the water, the higher the likelihood of corrosion.

Do Clorox chlorine tablets have stabilizer?

Clorox Pool & Spa XtraBlue 3-inch Chlorinating Tablets are multi-functional swimming pool chlorine tablets that kill harmful bacteria and unsightly algae. Each tablet dissolves slowly and contains a stabilizer for a long-lasting clean.

Why is chlorine tablets so expensive?

Chlorine in tablet form, especially, is hard to find and expensive. There are several reasons for this: Pandemic problems. Supply chain interruptions and staff shortages mean less product on the market.

Should I use 1 or 3 chlorine tablets?

In most cases, you're best off with 3-inch chlorine tablets, as one single tablet can treat up to 5,000 gallons of water. On the other hand, 1-inch tablets contain far less chlorine (about half as much as 3-inch tablets), so they're better suited for smaller indoor pools and spas.

Does liquid chlorine last longer than tablets?

That is not to mention the fact that you can store tablets for a much longer period than liquid chlorine. Although solid chlorine tablets make for a very convenient way to sanitize your pool, its use is not without any disadvantage.

Can you shower after chlorinating well?

Keep in mind that doing laundry and taking a shower cannot be done for at least 24 hours with a chlorinated well. Waiting a few days to do these is a good idea. We recommend using unscented bleach for this process and using a chlorine test kit from your local supply store.

How much does it cost to chlorinate a well?

To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 - $200.

How much chlorine do you use to shock a well?

4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach - (4 quarts in a gallon). Do not use excessive amounts of bleach - more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well.