Should I power wash or sand deck before staining?

Taking your time is key to power washing a deck successfully. Now that the wood has been cleaned and stripped of grime, you can sand it and apply your stain of choice. Power washing a deck before staining will allow the wood to absorb the stain better and deeper.

Should I pressure wash or sand my deck before staining?

Sand the entire deck to remove any old stain, paint, or varnish from the wood. After sanding, power-wash the deck and allow it to dry for at least 24 hours before staining. Sanding exposes porous wood that's ready to soak up the stain, but this isn't possible if the wood is full of water.

Should I power wash deck before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

Is it OK to sand a deck before staining?

If you plan to stain the deck, sand the surface before application to make the wood better absorb the coating. Use an orbital sander to remove any old gloss and smooth out any rough areas on decking boards. You may need to use a sanding sponge on the railings or balustrades.

Can you sand and stain a deck in the same day?

In recent years there have been a few new deck and wood stains coming to the market that allow the ability to prep and stain your deck all on the same day. As contractors in the deck restoration business, this allows us to save money and more importantly time by completing everything on the same day.

Power washing VS Sanding Deck - See the difference!

Is it better to stain a deck in the morning or evening?

Don't apply your deck stain in the direct sun; choose morning or evening hours, or a time of day when your deck has shade. Morning application can be a safer choice to help avoid any contact with dew that sets in overnight. Don't apply more stain than the wood can absorb.

What happens if you don't sand deck before staining?

You don't even have to sand unless you want or if it could really use one. The reason you want to clean the wood first is to remove any dirt, mold or mildew spores to make sure the stain has a clean surface to bond.

What happens if you dont wash your deck before staining it?

But don't just slap a coat of stain on in a hurry — you'll need to clean your deck before staining it. If you stain a deck without cleaning and prepping it first, the results will look blotchy, uneven, and, well, amateur. Any time you save skipping the cleaning stage, you'll spend twice over repairing the botched job.

Do you sand a deck after power washing?

When the deck is dry (36-48 hours after washing, depending upon humidity and weather conditions), it's time to sand the surface. You can use a pole sander with 80-grit sandpaper to remove all the loose wood fibers that were lifted by the pressure washing.

How long should you wait to stain a deck after power washing it?

A basic rule of thumb for DIY deck builders, homeowners, and professional contractors is that roughly 48 hours is an adequate drying time for a newly washed deck.

How long do I need to wait to stain my deck after power washing?

The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry.

How soon after pressure washing can you sand?

After you've pressure washed your deck, you'll need to wait for it to completely dry. Sometimes, this can take as long as 48-hours. Once it's dry, you'll want to sand your deck lightly. This is necessary to remove any splinters or fuzzy patches that pressure washing can cause.

How do you clean and stain a deck in one day?

What time of year should you stain your deck?

Because you want to wait for days that aren't excessively hot or humid, the best times to apply deck stains are in the late spring and early fall, when the weather is moderately warm and dry. Check the weather and find a time when it's not expected to rain for two days before and following the deck treatment.

Is a deck cleaner or power wash better?

A power washer takes much less time, but it can be dangerous—for both you and the wood. A scrub brush takes more time and work, but it's much safer. In many cases, scrubbing also gets the deck cleaner than a power washer could. Ultimately, you can power wash your decks if you're previously familiar with power washing.

What temperature is it not good to stain a deck?

If it's too hot, the stain may dry too quickly, potentially causing lap marks and uneven penetration. Avoid staining your deck if it's above 90 degrees Fahrenheit. To ensure this, either choose a cooler day or stain your deck in the morning before it gets too hot.

Can you use Dawn to clean deck before staining?

Liquid dish soap (ammonia-free) is safe for use on cleaning your deck when mixed with a little warm water.

How do you sand a deck quickly?

A random orbital sander is the best tool to sand a deck because it tends to be lighter and easier to use than other sanders. Random orbital sanders are also generally kind to the wood of a deck; belt sanders, by contrast, can gouge softwoods.

How much stain do I need for a 20x20 deck?

To stain a 20x20 ft² deck area, you'll need approximately 2 and 1 quarter gallons (2.25 gal). You can get this result by assuming that 1 gallon can cover up to 175 ft². Also, consider this amount is for one coat of stain.

How many coats of stain should you put on a deck?

We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much as the wood can absorb.

What if it rains 3 hours after I stain my deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you've stained the wood, the stain will peel and flake off.

What is the best outdoor temperature to stain a deck?

The ideal temperature range for application is between 50 and 80 degrees. And, it is important to choose a day when no rain is expected for 24 hours.

Can you walk on a stained deck the next day?

Keep off Newly Painted or Stained Deck

In average conditions, your paint or stain will be dry to the touch within 1-2 hours, but you should not walk on it for probably 4-6 hours. In cooler weather or during periods of high humidity, you will need to wait even longer than this.