Should I Feed My clones?

Freshly cut clones have no roots with which to take up nutrients, so feeding is not required until the first young roots have formed and then nutrients should be first applied at quarter strength, increasing to half vegetative strength as the clones become more developed.

How much nutrients should I give my clones?

Young plants need little to no nutrients to begin growth. A cloning solution from the Perfect Grower feeding chart is a great introduction to a young clone or seedling. If you're using the 1-Parts, 1-Part Grow at 0.5 grams per gallon will work well.

Should you water clones everyday?

Clones do best in environments between 70 and 77 degrees Fahrenheit, so make sure you place them in a hot room if necessary. You should also water your clones every day to keep the soil moist, but not too damp.

How do you keep clones healthy?

The first step in getting healthy clones is to start with a healthy stock plant (the plant you will cut from). Your plant should have strong genes, should be free of pests or diseases, and should not be displaying any symptoms of deficiencies or stress. This plant should also be large enough to support cutting from.

Should I foliar feed my clones?

Clones and plants in the vegetative stage will greatly benefit from foliar feeding. Since clones have no roots, they will extremely benefit from foliar sprays as it will aid the rooting process.

How to: Maintain Clones (For Fast Roots)

When should I add nutrients to clones?

Freshly cut clones have no roots with which to take up nutrients, so feeding is not required until the first young roots have formed and then nutrients should be first applied at quarter strength, increasing to half vegetative strength as the clones become more developed.

What should you feed clones?

Once clones are transplanted and watered into soil for about a week, you can begin to feed them with fertilizers, teas, or whichever nutrient technique you choose to employ. Plan for a safe, healthy transfer to your Home Grow: have some sort of box or packaging to keep your clones safe during transport.

Should you mist clones?

Spraying a clone with water dilutes the nutrients in the leaves. The clone will be forced to search for nutrients once the leaves have low nutrient levels. Misting also helps maintain water levels in the plant since it can't drink through the roots. Spray clones once in morning and once at night.

How often should I water clones?

The best time to water your clones, however, is every day as you should leave no too damp in the soil.

Should clones be kept in the dark?

Most clones are kept under 24 hours of light in nurseries, whether you are buying from a dispensary or direct from Dark Heart they are likely used to 24 hours of light, but most often the clones are kept under fluorescent or LED lighting and are not yet used to strong or powerful light/heat given off from the sun.

How much water should I feed my clones?

Do clones need air flow?

You need air circulation to build humidity. Most customers will cut a hole in the top of the 6 & 3 inch domes, the 7 inch dome has vents built in.

Should I use nutrients every time I water?

You don't want to use liquid nutrients every time you water—use them every other watering, or two waterings on, one off. It depends on the complexity of your soil and the health of your plants. Too many nutrients will damage your plants. Giving weed plants the proper amount of nutrients requires careful monitoring.

Should you fertilize new cuttings?

Aside from the root hormone you use when planting, don't bother fertilizing your cuttings. It's counterintuitive, but fertilizing them can actually slow down the process. Think about it – you're providing a steady stream of nutrition directly to the plant's stem…why would it be incentivized to grow new roots?

How do I know if my clones are healthy?

A strong, well-established clone should show visible signs of growth such as sturdy leaves and new growth at the nodes. The new leaves will be a bright green color but may get darker as the leaves mature.

Why are my clones turning yellow?

Chill Out. After a few days in its new home, a clone's leaves might start to yellow. This is completely normal and is a sign that rooting is about to start. Once roots have formed, the yellowing should start to dissipate.

Should you put cuttings in the sun?

Plant cuttings need bright light for photosynthesis so they can make energy for new growth. However, they should be kept out of direct sunlight, which can stress the new plant by overheating or dehydration.

How do you take care of new clones?

How far should light be from clones?

The LED grow light distance above the clones differs from the height required for seedlings. With clones, they will need intense light to begin. Depending on the power of the light and maturity of the plants, this could vary quite a bit between 14-36 inches from the top of the plant canopy.

What color light is best for clones?

The best lights for growing cannabis clones are heavy in the blue light spectra. That's because blue light gives plants vital energy that is transferred into root growth.

Do clones need a humidity dome?

Unlike seedlings, humidity needs to be much higher for cuttings. That's why you'll need a humidity dome over your clones to make sure they get enough moisture for their roots. Keep the dome on and make visual checks every day for signs of mold or mildew on your clones.

Do clones need nitrogen?

Clones need sturdy, carbohydrate-rich fuel. When a plant is fed nitrogen, it will use up to 25 to 30% of its energy to convert those nitrates into a form of nitrogen that plants can use for vegetative growth. Using the plant's energy for growth results in fewer sugars, or carbohydrates, in the stems and leaves.

How do I help my clones root?

Controlling the heat and moisture is essential for your clones to root. Tender cuttings should be covered in plastic to retain moisture. Heat mats should be used if you are growing in a cool place. Grow lights are essential in order to provide consistency.

What ppm should clones be?

Cannabis enjoys 500-600 ppm after cloning, 800-900 ppm when vegetating, and 1000-1100 ppm when flowering. So knowing the mineral content of your water before mixing your nutes can avoid stressing you and your plants.