Should I ceramic coat before or after PPF?

The point of Ceramic is to make sure absolutely nothing sticks to the paint - no grime, no dirt, no dust, no adhesive, no water, nothing. You must apply the PPF before the Ceramic coating, or else you will have to do the ceramic coating all over again.

Which goes on first PPF or ceramic coating?

The good news is that you can have both applied to your ride! However, it is best to have paint protection film applied first to protect your car from scratches and chips caused by road debris. Once these vulnerable spots are covered, you can have ceramic coating applied later on down the road.

Can you clay over PPF?

can you clay PPF? yes. however if you have a partial PPF or any exposed edges, the edge of the film will attract the clay like nobody's business and will be nearly impossible to remove.

Should you polish before PPF?

If you get both PPF and ceramic, the PPF adhesive will fill in minor swirls and scratches, so there is no need to do a polish or minor correction if you are getting both. If the paint is in really bad shape and has major scratches, then a correction would be necessary with either one.

Can you do PPF and ceramic?

if you are looking for the ultimate layer of protection protection, consider applying a Nano-coating or DIY ceramic coating as top coat of a PPF ,The ceramic coating will stick to the ppf and you will be able to improve a few drawback of PPF protection.

When To Apply Ceramic Coating Before Or After PPF ?

How long does PPF take to cure?

Give PPF at least seven days to cure before washing the vehicle. If you are using a pressure washer, keep away from the film's edges. It could cause the edges to lift, reducing the protection. If you are planning to wipe the surface, make sure it's hydrated.

Can you drive after installing PPF?

The bubbles should not be pressed as this is part of the curing process and they'll dissipate within two to three weeks after installation. The moisture held in those bubbles evaporates through the film's pores. If possible, do not drive your car the first week after installation.

Can I put PPF on top of ceramic coating?

You cannot put PPF on Ceramic. It will not stick - it may for a month or two at best, but then it will just come right off while you are driving. Ceramic coating prevents the adherence of ANYTHING to the car, so if the ceramic coating was applied properly the PPF will not stick.

Can you ceramic coat over Xpel?

Can I apply a ceramic coating on top of the film and how does it affect the self-healing feature of XPEL? Yes, Coatings can be applied to the films. Adding a coating does not stop the film from self-healing.

Can you ceramic coat SunTek PPF?

Can “coatings” be applied to SunTek Paint Protection Film? Ceramic coatings are approved for use with our Paint Protection Films when applied over the surface of the product.

Do PPF bubbles go away?

Air bubbles will evaporate over several days (or weeks, depending on weather) when the film is exposed to heat. If air bubbles are still on the film, the only way to remove it is to suck the air out with a needle. Expect these things to happen right after a PPF installation.

How do you keep a PPF clean?

Standard Ongoing Maintenance for PPF/Clear Bra (15 days +):

If dirty, GENTLY use a wash mitt to clean areas. Keep a regular vehicle wash schedule. E.g. once every 2 weeks for daily drivers. Every 3-4 months apply CarPro Reload to the surface to help with ease of maintenance and water spots.

Does PPF stop stone chips?

Whilst a PPF won't stop a large stone from high speed damaging your vehicle, it will keep it protected from general stone chips and everyday wear and tear.

How do you remove water spots from PPF?

Use a paint cleanser like p21s. that should remove the water spots. if it doesn't, you'll have to use a more aggressive polish and/or water spot remover like CarPro spotless. once you get rid of the water spots, wipe everything down with CarPro eraser and apply CarPro reload as a nano spray sealant.

Does PPF protect against scratches?

Essentially, PPF is a thicker, stronger, yet lightweight material. It provides stain resistance, protection from stone chips, light scratches, bug splatter, swirl marks, and other paint damage.

Which is better Xpel or 3M?

Self-Healing Properties

XPEL Clear Brand outperforms 3M when regarding self-healing properties. Even though 3M was the first company to enter the clear paint film industry, XPEL manufactured the first-ever self-healing film, which means that a scratched surface looks new shortly, even after a scratch.

How long after PPF can I paint?

Typically you should wait 30 days after a vehicle has been repainted before having paint protection film reinstalled.

What should you not do after ceramic coating?

Use only recommended mild soaps. Avoid high volume brush style car washes, and high PH detergent style cleaners. Avoid washing in direct sunlight to minimize streaking and water spotting. Wash from the top down leaving the dirtiest sections for last to avoid cross contamination.

Is SunTek better than Xpel?

Both have self-healing properties. I have used both xpel and suntek. Xpel has less of a shine thats more noticeable on metallic compared to Suntek... but Xpel is a tad more dense. I think Xpel does a better job protecting against rock chips and debris.

Does PPF yellow over time?

Over time and extended exposure to direct sunlight and various weather elements, the paint protection film may, over time, start to yellow. This is especially noticeable on white and brighter colored cars.

Is SunTek better than 3M?

SUNTEK. SunTek is often considered to be 3M's most direct competitor in terms of window film capabilities, performance, and technology. Specifically, the only real competitor to 3M's Crystalline series is CarbonXP (or CXP) window film by SunTek.

Does Xpel PPF need ceramic coating?

A: Ceramic Coatings purpose is to keep your car clean for longer by preventing anything from sticking to the surface, so naturally, PPF will lift or even not stick at all when a Ceramic coating is applied before a PPF Application. Aways apply a Ceramic Coating after PPF installs and when the film has fully cured.