Should a pool cover touch the water?

The cover is designed to touch the surface of the water. So your pool should always be filled when covered, and the water level should never go below 18 inches from the top of the pool. Check the water level of the pool and fill it up if it goes below 18 inches.

How much water should be on top of a pool cover?

Ideally, 2 inches of water is acceptable on top of your cover simply because it aids in keeping the cover on the pool when it gets windy however, having excess water on top of the cover can cause severe damage to your pool structure as well as to the water quality underneath the cover.

How tight should pool cover be?

How Tight Should a Safety Cover Be? Safety covers should be drum-tight, with only a slight deflection in the middle. When covers are too loose, leaves can blow under easily, and a high water level in springtime quickly traps leaves and turns your cover into a giant tea bag.

Should your winter pool cover touch the water?

Your pool water level should not be too low, as the water must support the cover in situations where you receive a heavy snowfall. At the same time, ideally you don't want the water to touch the underside of the cover under general conditions as that contact will create a wet spot where debris will accumulate.

How do I keep my pool cover from sagging?

If you have a leaf pool cover, there are some tools like pool pillows and DIY solutions like floating plastic rain barrels you can place underneath the cover that can help, but the best practice for pool safety covers to avoid sagging is to use an automatic or mesh cover.

How Tight Should A Winter Pool Cover Be?

Do pool covers let water through?

Mesh pool covers are designed to allow water to pass through the surface into the pool so that it does not collect on top. A solid cover, however, allows the water to collect and puddle in the middle. Therefore, a pump ³ is necessary to remove the water.

Can you run pump with pool cover on?

Absolutely! A cover does nothing to interfere with the water circulating through your system. It doesn't touch your pump or any other piece of equipment you have. When your pool is covered during these winter months, you can run it less, thus protecting the pump from premature aging.

What do you do with water on top of pool cover?

Before you can remove the cover, you have to remove the water that's on top of the cover. While you can try siphoning the water off with a garden hose or scooping it with a bucket, a much more effective method is to use a pool cover pump.

Can water evaporate under a pool cover?

An uncovered pool will lose water in the winter to evaporation in the same way it does during the summer. But the water loss is only about a quarter-inch on average during a 24-hour period when the pool is not in use. An uncovered or covered pool can have problems in the plumbing lines or pump.

Should you turn off pool pump while swimming?

Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.

Should you cover your pool at night?

Yes, you should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water and evaporation. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.

How long can I leave my pool cover on?

The cover should not be continually left on for more than 7 days continuously. Pool covers are very effective at reducing chemical usage. Make sure you continually monitor the water quality and quantity of chemicals required to maintain water chemistry within the recommended levels.

Should above ground pool cover touch the water?

The cover is designed to touch the surface of the water. So your pool should always be filled when covered, and the water level should never go below 18 inches from the top of the pool. Check the water level of the pool and fill it up if it goes below 18 inches.

Are pool covers waterproof?

Solid Covers for Above Ground Pools (Also Known as Winter Covers) The solid pool cover is by far the most common cover out there. They are the most versatile and are used to winterize pools. Solid covers are given this name, because they are made out of waterproof material.

Why does my pool cover have holes in it?

For safety reasons; if someone should end up under the pool cover, air will come in through the holes. These small holes prevent a large pool of water from getting on the pool cover.

Should pool be covered during day?

In dry and/or windy conditions, the evaporation rate of the pool increases. Therefore, it is generally beneficial to have a transparent or bubble cover on during daylight hours. In warm, humid conditions the evaporation rate decreases. In this case, it may be more beneficial to leave the cover off during the daytime.

Why does my pool cover sag?

Check the Water Level Regularly

One of the main reasons for a pool cover to sag is a low water level. Make it a habit to check the water level in your pool at least once a week. If you notice that the water level has dropped, add more water to the pool.

How do I stop wind from getting under my pool cover?

In-Ground Pool Covers

To secure the cover, place several sandbags or coffee cans filled with sand around the edges of the pool to help with holding cover in place. Make sure you have enough sandbags or coffee cans filled with sand to cover the entire perimeter of the pool's cover.

Should I turn my pool pump off when it rains?

If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.