Is Thompsons oil or water based?

Thompson's^® WaterSeal^® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson's^® WaterSeal^® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.

Is Thompson's Water Seal oil or latex?

Thompson's WaterSeal Total All-in-One Stain and Sealer Solid | Total All-in-One Solid This unique latex & oil blend beautifies and revives the wood's appearance, while waterproofing with a film-forming barrier.

Is Thompson concrete sealer water based?

Thompson's WaterSeal Clear Flat Transparent Water-based Waterproofer (5-Gallon) in the Waterproofers & Sealers department at Lowes.com.

Is Thompson water Seal solvent based?

Thompson's Waterseal Smooth Clear Solvent-Based Multi-Surface Waterproofer 1.2 gal. Timing: Available For Pick Up Today! Proven to waterproof wood, concrete and brick. Use as a wood sealer, brick sealer or for concrete waterproofing.

How long does Thompson Water Seal last on wood?

How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.

Water Based vs Oil Based Fence Stain - Which Is Better For Fence Staining?

Why is my Thompson Water Seal sticky?

What is this? However, high moisture means a higher concentration of water particles in the surrounding air, hindering drying. As a result, you will see your freshly stained surface remain tacky even after a full 24 hours of drying time or longer.

Does Thompson Water Seal darken wood?

Thompson's^® WaterSeal^® Waterproofing Wood Protector - Clear doesn't change the color of the wood. Transparent deck stain adds a hint of color and shows the most wood grain.

Is Thompson Water Seal toxic to animals?

Environmentally safe, will not harm plants, pets, fish, livestock, humans. Contains zero volatile organic compounds (VOC). No toxic fumes. Seals and protects with single application on most surfaces.

Who makes Thompson Water Seal?

Thompson's® Water Seal® by Sherwin-Williams Company | Designbiz.com - Sealers and Finishes.

What type of sealer is Thompson's Water Seal?

Wood sealer that provides long-lasting outdoor wood protection. It waterproofs long after the initial water beading is gone.

Is Thompsons Water Seal acrylic?

Thompsons WaterSeal Deck & House 100 Percent Acrylic Latex Waterproofing Solid Stain, Russet 16141 enhances the natural beauty of wood by adding exceptional fade resistant beautiful color that hides the wood grain while allowing wood texture to show. This formula is available in 67 rich tones.

Is Thompson concrete sealer good?

The product has an extremely high VOC content, making it a bad choice for states like California, New Jersey, New York, and others with strict environmental regulations. It is also not the best choice if you yourself care about the environment.

How often do you need to apply Thompson's water Seal?

Thompson's WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.

Can you put Thompson's water Seal over a stain?

Yes, you can put Thompson water sealer over stained wood whether the stain is water or oil-based. But surface preparation is key. If the stain has completely dried and cured it's fine to apply sealer, but if there is still some moisture, applying the water seal over the stain might cause problems.

Does Thompson's water Seal peel?

Thompson's WaterSeal has clearly not been a consumer favorite with deck stains or sealers. Mainly as it does not offer any UV protection and it grays in a few months. The Transparent and Semi-Transparent versions are prone to premature peeling and wearing after about 1 year.

Is Thompson Water Seal Safe?

This product contains an in-can biocide, may be harmful if swallowed. There is no data on the product itself. The product should not be allowed to enter drains or water courses or be deposited were it can affect ground or surface waters.

Is Thompson's Water Seal flammable?

FLAMMABILITY Flash point above 60CC (Closed Cup) Non-flammable product.

How do you seal plywood from water?

You can use liquid latex to waterproof plywood. Alternatively, you can also use waterproof spray-on paint, clear-colored polyurethane varnish, or epoxy sealant to seal plywood and make it watertight.

How long does Thompson Water Seal last in can?

PVC primer and Thompson's Water Seal™, sealed tightly, can be kept indefinitely (no minimum temperature), as can concrete bonding additive if stored above freezing.

Is Thompson Water Seal good for pressure treated wood?

Some, like Thompson's^® WaterSeal^® Waterproofing Wood Protector, recommend waiting 30 days before application on new pressure treated lumber. Other products, like Thompson's^® WaterSeal^® Waterproofing Stain, can be applied immediately to new pressure treated lumber.

What is the best way to apply Thompson Water Seal?

The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.

How do you remove Thompsons patio sealer?

How long does it take Thompson water Seal to dry on wood?

Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. Allow minimum of 30 days drying time before applying oil based paint over Thompson's® WaterSeal® Waterproofing Wood Sealer – Clear.

How long does Thompson's water Seal need to dry before rain?

When to Seal Your Deck The forecast should indicate no rain for at least 24 hours after application. The deck surface should be allowed to dry for at least 48 hours before application.