Is Thompson concrete sealer water-based?

Thompson's WaterSeal Clear Flat Transparent Water-based Waterproofer (5-Gallon) in the Waterproofers & Sealers department at Lowes.com.

Is Thompson water sealer oil based or water based?

Thompson's^® WaterSeal^® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water. Each product has its own "feel" during application; however, each product provides protection from water damage and has a coating that resists mildew and UV damage.

Is Thompson a water sealer?

Thompson's clear multisurface sealer is designed for waterproofing so you can prevent water damage on a variety of surfaces around your home.

What type of sealer is Thompson's Water Seal?

Thompson's^® WaterSeal^® Solid Wood Sealer.

Is Thompson's Water Seal oil or latex?

Thompson's WaterSeal Total All-in-One Stain and Sealer Solid | Total All-in-One Solid This unique latex & oil blend beautifies and revives the wood's appearance, while waterproofing with a film-forming barrier.

Anyone used Thompson waterproofer + masonary protector?

Is Thompson Water Seal acrylic?

Thompsons WaterSeal Deck & House 100 Percent Acrylic Latex Waterproofing Solid Stain, Russet 16141 enhances the natural beauty of wood by adding exceptional fade resistant beautiful color that hides the wood grain while allowing wood texture to show. This formula is available in 67 rich tones.

How long does it take for Thompson Water Seal to dry on concrete?

Allow at least 24 hours to dry; however drying time will vary depending on the substrate, temperature and humidity. When completely dry, perform the splash test to determine if second coat is necessary.

How long does Thompson Water Sealer last?

If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.

Is Thompson Water Sealer any good?

Is Thompson's WaterSeal Any Good? Our experience with Thompson's WaterSeal Waterproofer Plus Clear Wood Protector was disappointing overall, and we would not recommend this product. Its inability to prevent UV graying is too harmful to your deck's wood.

How do you remove Thompson's water seal from concrete?

To use mineral spirits, wipe the spirits over the area with a cloth. Let it sit for a few minutes, then scrub the area with a scrub brush. To use a concentrated degreaser, follow the instructions on the label of your selected product. Some good choices for this are Krud Kutter or Simple Green.

Why is Thompson Water Seal sticky?

What is this? However, high moisture means a higher concentration of water particles in the surrounding air, hindering drying. As a result, you will see your freshly stained surface remain tacky even after a full 24 hours of drying time or longer.

Is Thompsons water seal waterproof?

Clear Multi-Surface Waterproofer. Proven to waterproof wood, concrete and brick. Use as a wood sealer, brick sealer, or for concrete waterproofing.

How often do you need to apply Thompson's water seal?

Thompson's WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.

Does Thompson water seal peel?

Thompson's WaterSeal has clearly not been a consumer favorite with deck stains or sealers. Mainly as it does not offer any UV protection and it grays in a few months. The Transparent and Semi-Transparent versions are prone to premature peeling and wearing after about 1 year.

Can you stain over Thompsons water seal?

Yes! You can apply an oil-based sealer over a water-based finish, but the underlying coat must be dry before coating over it. For instance, to coat over water-based stain with an oil-based sealer or paint, allow the water-based sub-coat to dry for a minimum of 24 hours before applying the oil-based topcoat.

How long before you can walk on Thompson water Seal?

Now that you've applied Thompson's Water Seal following the instructions above, to your entire surface, you can walk away and let it dry for 24 hours. That's all the time you need to let Thompson's Water Seal work to protect your outdoor surfaces from water damage.

How much does Thompson's water Seal Cover per gallon?

That determines how many gallons of stain are required (each gallon covers up to 400 square feet).

Is Thompson water Seal supposed to be white?

No. Thompson's^® WaterSeal^® Clear Multi-Surface Waterproofer applies white but dries clear and allows your wood to gray naturally over time. Prior to covering the entire surface, a test patch should be done in an inconspicuous place.

Do you need 2 coats of Thompson's water Seal?

Apply 2 coats using brush,roller or sprayer. note: Use at full strength.do not dilute. The second coat should be applied when the first coat has soaked in the surface. For best results do not leave the first coat to dry for more than 1 hour before applying the second coat.

Is Thompson concrete sealer good?

The key features of this product is that is prevents water damage, but it is not nearly as effective as other waterproofing sealer options. Other reviews of Thompson's WaterSeal state that the product doesn't last more than a few months, if that.

Can I use 2 coats of Thompson's water Seal?

One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's^® WaterSeal^® Waterproofing Stains, you can clean your tools with soap and water.

Can you paint over Thompson Water Seal on concrete?

You should not paint over Thompson's WaterSeal Advanced Clear, however. Proper preparation of the concrete and adequate drying times are required before you can start painting.

What is the best way to apply Thompson's water sealer?

The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.

Is Valspar concrete sealer water based?

Valspar | Water-based | Concrete Stains & Sealers.