Is thinner engine oil better?

Engine oil viscosity

Thin oils reduce friction in engines and help engines start quickly during cold weather. Thick oils are better at maintaining film strength and oil pressure at high temperatures and loads.

Will thinner oils damage engine?

Just like using an oil with too high a viscosity may lead to problems in Brad's engine, using a thinner oil can have the same result. Oil that's too thin can fail to develop a consistent lubricating film, inviting metal-to-metal contact that causes wear. Extreme stress and heat add to the challenge.

What happens if engine oil is too thin?

If the engine oil's too thin, symptoms you may experience include: Engine ticking. The smell of burning oil, especially in hot weather. Low oil pressure.

Does thinner oil make more power?

Thinner oil viscosity allows the engine to produce more horsepower or maintain engine specs because the oil pump is not working as hard and rotational drag is decreased. Some people actually run their engines with the dipstick level lower than normal full or at the low mark, to increase horsepower.

Why do new engines use thinner oil?

To prevent fuel consumption due to excessive fluid friction, automobile manufacturers (OEMs) strive to use even thinner engine oils.

Will Thinner Oils Damage Your Engine?

Is thicker engine oil better?

Within reason, thicker oil maintains a better lubricant film between moving parts. Some have even used thicker oil in a leaky engine to prevent oil from seeping out. But really, thicker oil is not good for your engine. Not when “thicker” means higher viscosity than the manufacturer recommends.

Is Thicker oil better for high mileage cars?

The slightly thicker oil film from the heavier base weight oil - 10W - can help protect worn engine bearings as well. As long as you're not hearing knocking or serious mechanical noises from the engine, the heavier oil should buy you many more miles of service from your vehicle.

What happens when you use 10w40 instead of 5w30?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Is 5w30 better for older cars?

5W-20 and 5W30 motor oil are winter viscosity grade oils primarily recommended for older engines and light-duty use. These oils are best utilized in colder temperatures.

What happens if you use 10w30 instead of 5w30?

Both 5w30 and 10w30 engine oils have a similar SAE rating, meaning that they will perform the same at high or operating temperatures. The digits 30 indicates the viscosity of the oils when in high temperatures. 10w30, however, will thicken more when in a cold climate. 5w30 is much suitable during the cold season.

Is thicker or thinner oil better?

Engine oil viscosity

Thin oils reduce friction in engines and help engines start quickly during cold weather. Thick oils are better at maintaining film strength and oil pressure at high temperatures and loads.

Does thinner motor oil burn faster?

Thinner oil cools better than thick oil and engines designed to work with thinner oils also require the thin oil to help with keeping the engine cool. Won't a thinner engine oil burn more easily? Yes, generally it would but again the properties of these new thin motor oils are such that they work as designed.

Can thin oil cause overheating?

It's usually noticed if your coolant is low, but low oil can also cause the engine to overheat. This can occur even if your coolant level is fine. If there is too little oil in the engine, it will continue to heat up because it has no opportunity to cool.

Is synthetic oil thicker or thinner?

It is true that synthetic oil is thinner than conventional oil and therefore flows more easily. If there is a spot where oil could leak out in your engine, then synthetic oil is more likely to leak than conventional. However, synthetic oil would not cause the leak.

Is 5w30 thicker than 10w30?

So both the oils 5W–30 and 10W–30 have exactly the same viscosity (SAE 30) when your engine is running, and will perform in the same way. However, the 10W–30 oil will be thicker (higher viscosity) than the 5W–30 when it is cool.

What is best oil for high mileage cars?

Is 5w30 good for high mileage?

Full synthetic 5w30 oils are recommended for high-performing cars, those that carry heavy loads, and vehicles operating in high temperatures. These oils are made with high-performance additives to enable them to deal with extreme conditions.

What oil should I use for high mileage?

Some mechanics recommend switching to a thicker (higher viscosity) oil — such as 10W-30 full synthetic oil instead of 5W-20 full synthetic — or using oil additives to stop leaks.

Is 10w40 good for high mileage?

Designed for high mileage vehicles

Mobil 1 High Mileage 10W-40 motor oil is recommended by ExxonMobil for use in high mileage vehicles (even those that have used lower quality conventional oils^†), including: Cars. Trucks.

Will the wrong oil damage my engine?

Cause damage to engine life

The wrong engine oil can cause engine damage because it does not properly lubricate its components. This will lead to metal-on-metal contact since the moving parts are not being lubricated. Friction quickly follows, causing engine parts to wear.

Is 10w40 thicker than 5w30?

This means that the 5w30 oil will protect the engine better at low temperatures, usually when the engine is just starting or during weather conditions such as winter. At high temperatures, the 5w30 oil is thinner than that of 10w40 since 30 is lower than 40.

What oil is better for older cars?

Monograde oils are still widely available, primarily because they're used in very hot climates, or in heavy-duty applications such as mining or construction equipment. These single-grade oils can be used in 1950s and older cars – generally SAE 30 to SAE 50 – but most owners use multi-grade.

Is 10W30 better for high mileage?

10W-30 motor oil makes for a decent high-mileage oil. It gives a better fuel economy while reducing the oil consumption for older engines. Older engines with more than 75,000 miles on them require a thicker oil that will properly lubricate their critical engine parts and prevent oil leaks, sludge, and deposits.

Which oil is thicker 10W40 or 10W30?

The difference between 10W-30 and a 10W-40 is the high temperature viscosity. Obviously, a 10W-40 is thicker than a 10W-30 at high temperature.