Is synthetic stucco the same as EIFS?

Synthetic stucco is commonly referred to as Exterior Insulating and Finish System (EIFS). Homes with this exterior finish are often strikingly beautiful, offer great flexibility in home design, and provide energy savings.

How do I know if I have EIFS or stucco?

The easiest way to identify synthetic stucco (EIFS) is by touching the material with your bare hand. When you touch the wall where the stucco is installed, it will feel like plastic. You can also knock gently on the wall. If it sounds hollow and thin, you have EIFS on your home.

What is the difference between stucco and EIFS?

What is EIFS? Unlike traditional stucco that utilizes natural ingredients and mesh, External Insulation and Finishing Systems (EIFS) stucco uses layers that add in synthetic materials. The first layer is comprised of a polystyrene foam board. Then, that is followed by a fiberglass mesh and a finishing coat.

What is considered synthetic stucco?

Synthetic Stucco (EIFS)

It's more flexible than traditional stucco and consists of a moisture barrier, foam insulation, cement basecoat, reinforcing fiberglass mesh and an acrylic finish. Synthetic stucco is 80% lighter than traditional hard-coat and relatively durable, due to containing fiberglass.

What is the difference between stucco and synthetic stucco?

Synthetic Stucco Performance. Traditional stucco is more durable, fire resistant, and has greater longevity, being able to last up to 50 years with low maintenance. Traditional stucco is also very porous and dries out quickly, while synthetic stucco is not and can have water damage issues if not installed properly.

Stucco Vs EIFS - What’s the difference?

What is wrong with synthetic stucco?

Severe Synthetic Stucco Problems

Delamination, which is synthetic stucco detaching from your home's exterior. Rotting of wood beams and trim. Mold and mildew growth, both on interior walls and beneath on the home's base walls. Infestation of termites and other moisture seeking insects.

When did they stop using EIFS?

EIFS has been in use since the 1960s in North America, first on masonry buildings, but since the 1990s the majority on wood-framed buildings.

What is another name for synthetic stucco?

Synthetic stucco is commonly referred to as Exterior Insulating and Finish System (EIFS).

Is synthetic stucco waterproof?

If it is EFIS synthetic stucco, then it is considered non-permeable. Many homeowners think that their Traditional stucco walls are waterproof, but they are not, they are water resistant, therefore, even if there were no cracks in the stucco wall itself, moisture would still penetrate into the wall.

What can I replace EIFS with?

EIFS Replacement Options: To replace existing EIFS most of our clients choose Hardieplank, or cedar siding with Cultured Stone accents.

Is Dryvit synthetic stucco?

The product called Dryvit is a type of synthetic stucco that is applied as a final coat to another stucco system, such as EIFS, to keep water from penetrating the other layers of the wall.

Does EIFS have one coat stucco?

Stucco or One Coat Stucco is not to be confused with Exterior Insulation and Finish Systems (EIFS) or Synthetic Stucco, as EIFS has become to be known in certain areas of the country. EIFS have the appearance of stucco. Stucco is a "natural" product, while EIFS are/is a synthetic product.

What type of stucco is best?

If weather is a concern and you have enough money in your budget, acrylic stucco might be the best choice for you. Synthetic stucco material is also called an exterior insulation and finish system (EIFS), and it is a polymer-based laminate that is applied in two coats over a rigid insulation board secured to a wall.

What are the 2 types of EIFS systems?

EIFS is available in two basic types: a barrier wall system or a wall drainage system.

What is the difference between Dryvit and EIFS?

Having a house with EIFS, also known as Dryvit, isn't the end of the world. EIFS isn't a disease; it's synthetic stucco. And even though your house may have been built using it, with knowledge and proper maintenance everything can be just fine. EIFS is an Exterior Insulation and Finish System.

Can you power wash EIFS?

A: First of all, do not use a pressure washer on a synthetic stucco surface. This type of finish, known as an exterior insulation finish system or EIFS, is a barrier-type system.

What is the difference between acrylic and synthetic stucco?

Traditional stucco requires a wire mesh underlay to stick to the home's exterior whereas acrylic stucco is a multilayered exterior coating with a foam insulation board, synthetic stucco first coat, fiberglass mesh, and synthetic top coat. Acrylic stucco repels water while classic stucco absorbs water.

Can synthetic stucco be painted?

Many of our customers ask, “can you paint acrylic stucco?” The answer is yes! Perhaps the confusion is due to the many different types of stucco and stucco systems out there, as well as the multitude of different names used to describe this family of exterior siding.

Why do insurance companies not like EIFS?

A great deal of insurance coverage disputes arose over the years due to the tendency of EIFS to trap water behind a building's walls. As a result, many insurers implemented an EIFS exclusion in commercial general liability policies barring coverage for property damage that results when EIFS is used in construction.

Where is EIFS banned?

North Carolina has banned the so-called "barrier" variety of EIFS in new home construction, and Georgia plans to do the same in the fall, according to the NAHB.

Can you remove synthetic stucco?

"Water-proofing the home avoids future problems. It provides a huge peace of mind to the homeowner." The first step in removing synthetic stucco is to scaffold the area. A plastic tent is installed over the scaffolding to protect the house from inclement weather. The stucco is removed and disposed of in a drop box.

Do people still use EIFS?

Yet today, EIFS are still around. About 100 million square feet of EIFS went on new and remodeled homes last year, rivaling any other siding material.

What's wrong with EIFS?

The problems with barrier EIFS cladding all stem from water intrusion. These problems include moisture accumulation in the wall cavity, subsequent wood damage and, in more advanced cases, mold growth and the infestation of pests such as carpenter ants or termites.

How do you know if EIFS is bad?