Is Sycamore good for chainsaw carving?

CARVING. There is something exceptional about sycamore wood. Generally underrated and often overlooked, the strong timber of sycamore has a subtle sheen and smoothness that makes it a very attractive choice of wood-carving. The carved wood retains a good, hard-wearing edge that is not prone to brittleness.
Takedown request   |   View complete answer on pioneerbushcraft.org


Are Sycamore trees good for anything?

Wildlife benefit from hollow sycamore trees, using them as storage chambers for nuts, nesting sites, and shelter. The enormous size of sycamore trees makes it impractical for the average home landscape, but they make great shade trees in parks, along stream banks, and in other open areas.
Takedown request   |   View complete answer on gardeningknowhow.com


Is sycamore wood good for woodworking?

Woodworkers love it when they see it because it has an unusual look and is very attractive and easy to work with," he adds. Contemporary uses for American sycamore include lumber and veneer, paneling, interior trim, furniture parts, slack cooperage and fuel.
Takedown request   |   View complete answer on woodworkingnetwork.com


Is sycamore wood toxic?

Allergies/Toxicity: Besides the standard health risks associated with any type of wood dust, no further health reactions have been associated with Sycamore.
Takedown request   |   View complete answer on wood-database.com


Is Cherry good for chainsaw carving?

Cherry wood is ideal for chip carving and chainsaw carving. Cherry wood is a hardwood, and therefore is perfect for creating a stunning and appealing wood figure.
Takedown request   |   View complete answer on woodiswood.com


What to Look for In Wood for Chainsaw Carving - PART 1



Is sycamore wood good for carving?

CARVING. There is something exceptional about sycamore wood. Generally underrated and often overlooked, the strong timber of sycamore has a subtle sheen and smoothness that makes it a very attractive choice of wood-carving. The carved wood retains a good, hard-wearing edge that is not prone to brittleness.
Takedown request   |   View complete answer on pioneerbushcraft.org


What wood is the easiest to carve?

The Easiest Wood To Carve- Basswood

The most popular and universally used wood for carving is Basswood. The softness of Basswood is enough to make carving fairly easy, while emphasizing the fine details well thanks to the small grain knots.
Takedown request   |   View complete answer on woodiswood.com


Can sycamore be used for cutting boards?

From our experience, we find that Sycamore is traditionally used in the production of furniture, furniture parts, joinery paneling and mouldings. In some instances, it can even be used for kitchenware and cutting boards.
Takedown request   |   View complete answer on alumber.com


Is sycamore hard or soft wood?

Forest Distribution. American sycamore trees are generally huge, being one of the largest hardwood species in North America, growing throughout the eastern and central USA in natural hardwood forests.
Takedown request   |   View complete answer on americanhardwood.org


Do sycamore logs burn well?

Sycamore – (Scientific Name – Platanus Occidentalis) Sycamore is decent firewood and produces a good flame, but it does only have a moderate heat output and does need to be well seasoned as it does have a very high moisture content when live.
Takedown request   |   View complete answer on charltonandjenrick.co.uk


What can you do with sycamore?

The sycamore is full of drinkable sap, read water when you need it. The sycamore can also provide a maple-like syrup as well, but you've have to boil many gallons of it to get syrup or sugar. Knowing there is always a source of drinkable sap/water nearby has its advantages.
Takedown request   |   View complete answer on eattheweeds.com


What's wrong with the Sycamore trees?

Sycamores are notoriously prone to anthracnose, a disease which can cause massive leaf drop in early summer. Usually a cosmetic rather than life-threatening affliction for the tree, it generally re-foliates in short order. As if that weren't enough, sycamores are prone to heartwood rot.
Takedown request   |   View complete answer on delawareonline.com


Is sycamore a pretty wood?

Quartered sycamore is a very beautiful material but very little is produced. Board 4 shows characteristic heartwood and sapwood as well as a small brown knot. Sycamore will occasionally show damage from the Columbian Timber Beetle (see soft maple) as seen in Board 5. The beetle bores into flood prone timber.
Takedown request   |   View complete answer on extension.purdue.edu


Is sycamore a stable wood?

In some instances, it can even be used for kitchenware and cutting boards. However, because Sycamore is classified as a moderate hardness hardwood, it rarely found in the production of hardwood flooring.
Takedown request   |   View complete answer on alumber.com


Does sycamore wood have antibacterial properties?

Fact: Sycamore wood contains antibacterial properties that make it the perfect choice for chopping boards and other culinary equipment.
Takedown request   |   View complete answer on friendsofgrovepark.co.uk


What is quarter sawn sycamore?

Quarter Sawn Sycamore is the same species as Sycamore that has been cut from the log at a different angle (quartered). The resulting lumber is more stable and exhibits dramatic flaking patterns that run perpendicular to the grain. Common Names: American Plane, American Lacewood, Buttonwood, Platanus occidentalis.
Takedown request   |   View complete answer on ocoochhardwoods.com


Is sycamore good for flooring?

Quarter-sawn Sycamore flooring has an even light yellow and tan appearance. The flooring makes for a very desirable floor aesthetically. Sycamore is not sensitive to sunlight and will not darken considerably with an oil-based finish.
Takedown request   |   View complete answer on countyfloors.com


What type of wood is best for chainsaw carving?

The best softwoods suitable for chainsaw carving are cottonwood and ponderosa. Although cottonwood is classified as a hardwood it is very soft and pleasant to carve, same as basswood being put in the “hardwood” category but still works as softwood for chainsaw carvers.
Takedown request   |   View complete answer on woodiswood.com


What is the hardest wood to carve?

Here, we list the top 10 hardest woods in the world, and provide a bit of information about each type:
  • Australian Buloke – 5,060 IBF. ...
  • Schinopsis brasiliensis – 4,800 IBF. ...
  • Schinopsis balansae – 4,570 IBF. ...
  • Lignum vitae – 4,500 IBF. ...
  • Piptadenia Macrocarpa – 3,840 IBF. ...
  • Brazilian Olivewood – 3,700 IBF. ...
  • Brazilian Ebony – 3,692 IBF.
Takedown request   |   View complete answer on hitchcockandking.co.uk


Is maple good for chainsaw carving?

Maple wood is excellent for chainsaw carving.
Takedown request   |   View complete answer on woodworkly.com


Is sycamore good for spoon carving?

Sycamore (the English version a maple – Acer pseudoplantanus, not American sycamore a plane – Platanus occidentalis) is a lovely wood to carve and dries hard and durable. It was the wood of choice for Welsh Cawl spoons and for clog soles in Wales.
Takedown request   |   View complete answer on davecockcroft.com


What is the difference between a sycamore and a cottonwood tree?

Sycamores produce a yellowish-brown, dry fruit, known as achenes. The fruit has "hairs," which allows the wind to carry it long distances. Cottonwoods are fast growing trees which have a crown height between 500 and 100 feet. They produce large crowns, up to 75 feet wide.
Takedown request   |   View complete answer on hunker.com


Is Red oak good for carving?

Yes, Oak is good for carving. Oak is a popular ideal wood for carving because of its great properties. Because of being strong and sturdy Oak wood carvings has long-term durability. But carving with oak is not simple as carving with basswood or pine due to various factors.
Takedown request   |   View complete answer on woodworkly.com


Why do sycamore trees make you sick?

Atypical Myopathy is another name for this and obviously is related to grazing in the region of sycamore trees. The helicopter seeds and the leaves are poisonous, containing the poison Hypoglycin A (HGA) which causes muscle damage.
Takedown request   |   View complete answer on equine-vets.com