Is sub-base necessary?

Do I really need a Sub-base? The short answer is: if the pavement will be trafficked by vehicles, then yes, but if it will be foot-traffic only, then not necessarily. The type of paving or surfacing that will be used is one of the key factors in determining whether a sub-base will be required.

Can you lay a patio without a sub base?

You do need to put something under paving slabs. Paving slabs should not be laid directly on to soft ground or grass. What's crucial to patio laying success is a sub-base to provide the support paving slabs require. You'll need a sub-base, which is the main load-bearing layer of your patio.

What happens if you dont compact sub base?

Each time a vehicle pulls into a garage and stops, that action creates a plate compactor effect. If the backfill under the slab has not been properly compacted, the structural fill will eventually settle, leaving voids.

What is the purpose of sub base?

Subbase is often the main load-bearing layer of the pavement. Its role is to spread the load evenly over the subgrade. The materials used may be either unbound granular, or cement-bound.

Does concrete need a sub base?

Subbase for Concrete Slab

The subbase placement is optional and it serves as a work platform for construction of the slab and provide more uniform support for the slab. As the thickness of subbase increases, the ultimate load carrying capacity of slab increases.

Should You Get a Sub for Your Studio?

Can I pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

What happens if you don't put gravel under concrete?

Because concrete is a very porous material, it will absorb any moisture that it contacts. This can cause pooling. Without crushed stone, pooling water will settle under it and erode your slab. Adding a layer of crushed stone will add proper drainage, as well as create a barrier between your slab and the ground.

Can I use gravel as a sub-base?

This unstable structure means all gravels are not suitable for patio sub bases. The typical reason for wanting to use gravel for a patio base is recycling existing materials. It is much more expensive to skip used gravel and buy in fresh sub base.

Can I use sand as a sub-base?

Simply put, sand isn't sturdy enough to work well as a subbase for something like a driveway. With areas like patios, which don't require a ton of load-bearing, sand as a subbase works fine, though it's not as reliable as gravel.

Can I use broken slabs as a sub-base?

It will be fine.

Is compacting necessary?

Compaction decreases the likelihood of settlement after a building, roadway, runway or parking lot is constructed which could result in premature pavement failure, costly maintenance or repairs. Soil compaction is a crucial part of the construction process as it provides a strong working platform.

Can you compact without a compactor?

A lawn roller or hand tamper can be used to compact the moist soil, or you can walk over it.

Should I wet sub-base before compacting?

You'll want to ensure that the water penetrates the entire depth of the sub-base material from top to bottom, but you'll want to avoid flooding the surface. If the base is too wet, you'll find that your plate compactor sinks too deep into surface. If this is case, allow the aggregate to dry out.

Can you lay patio slabs straight onto soil?

While it is possible to lay paving slabs on soil, it is not generally advised. The durability of any paving with a soil base can depend on many factors, including: Type of soil: Heavy clay soil will be far more durable and less likely to be compromised by British weather conditions.

Can I lay slabs on just sand?

So Can You Ever Lay On Just Sand? We'd always, always recommend bedding slabs down. Whilst you may get away with it in some instances, the vast majority of slabs won't stay put when laid straight onto sand. We'd recommend bedding the slabs down with a simple mortar mix each and every time.

How thick should a sub-base be for a patio?

The depth of the mortar bed should be approximately 35-40mm deep. Ideally starting from a right angle or straight edge, place the slab down. Gently tap with a rubber mallet or press down with your hands and use a spirit level to ensure to make sure the slab is level and in line with your proposed design.

How thick should my sub-base be?

The subbase should be laid to a minimum of 75mm on a area which will be having foot traffic, 100mm - 125mm thick for domestic driveways. The subbase will need to compact using a vibrating drum or a "waker plate". The finished surface for the sub-base should not deviate by more then +/- 10mm.

Can you pour concrete on top of sand?

Pour concrete over a solid, well-drained base

Because concrete slabs “float” on the soil, soft ground or voids underneath may cause unsupported areas to crack under heavy weight like vehicles. Pack about 4 in. of sand or gravel over clay and other poorly draining soils to provide even support.

Can you lay pavers on just sand?

How to lay pavers on sand? For the installation of pavers, use coarse sand. The sand intends to strengthen a smooth, high layer over the rock and create a firm, solid pavement surface. Coarse sand is cheaper than sandboxes' fine sand, making it an affordable and practical choice.

Can you use 20mm gravel as sub-base?

0-20mm ballast is perfect for sub-base and concrete foundations. 20mm screened ballast is versatile and can be used on driveways, footpaths, oversite fill as well as sub-bases.

Do you need sub-base for gravel grid?

Yes it is absolutely essential that you have a good quality base beneath your gravel driveway to ensure it will take car traffic etc... without sinking in places, it is also important to use a good quality weed control membrane, regards, Dave.

Can you use aggregate as sub-base?

A sub base is an aggregate or aggregate mix that forms a sound, load-bearing base layer for applications such as the construction of roads, paths and pavements. A sub base aggregate can also be used as a base for patios and artificial grass.

How many inches of gravel do you need for concrete?

Excavate the slab area to a depth of about 7 inches, allowing 3 inches for a gravel base and 4 inches for concrete.

Can you make concrete without gravel?

can you make concrete without gravel? A typical concrete mix cannot be made without gravel. Concrete is made from a mixture of cement, sand, gravel (crushed stone), and water. A mix ratio of 1 part cement, 2 parts sand, 3 parts gravel, and water, will give you a strong concrete mix.

Is 3 inches of concrete enough?

A concrete patio slab should be at least 4 inches thick and have a compressive strength of 3,000 PSI. You're free to make it thicker or stronger, but unless specifically required for your patio build, it's likely overkill to surpass 4 inches in thickness.