Is spray foam better than regular insulation?

R-value is a simple “the higher, the better” statistic. On paper, spray foam is the clear winner in this category, as closed cell foam can reach staggering R-value heights of up to 7.0. It also doesn't sag or settle over time, a side effect that fiberglass insulation suffers from when it's installed incorrectly.

What are the disadvantages of spray foam insulation?

Is spray foam insulation worth it?

Closed-cell spray foam is the king of the insulations when it comes to both R-value per inch and cost. Nothing else comes close, really. Unlike its open-cell cousin, closed-cell spray foam is not vapor permeable and will not hold water. This makes it an excellent option in case of water intrusion.

Is spray foam insulation better than fiberglass insulation?

Spray foam insulation has a higher R-value than fiberglass, making it a better insulator. Another difference between them is that spray foam is watertight while fiberglass cracks under moisture. However, installing spray foam requires a professional while fiberglass is easy to install yourself.

Is spray foam better than batts?

The advantages of batt insulation center on cost and ease of installation, while the advantages of spray foam are focused on a high R-value per inch of thickness. The disadvantage of batt insulation, on the other hand, lies in its lower R-value per inch, while spray foam insulation's disadvantages revolve around cost.

Spray Foam Insulation vs. Fiberglass

Where should you not use spray foam insulation?

Can mold grow on spray foam insulation?

As a product, spray foam insulation does not attract mold. And unlike wood or metal, spray foam does not rot, rust or deteriorate. This means that an area properly sprayed with foam insulation will never become a food source or a hospitable environment for a mold colony.

How long does spray foam insulation last?

Typical Insulation Lifespan

The International Association of Certified Home Inspectors states that spray foam insulation, wrap tape and housewrap insulation can last for more than 80 years. At the same time, cellulose, loose-fill, foamboard, loose fill and rock wool insulation can last up to 100 years.

What is the R-value of 4 inches of spray foam?

Spray Foam Insulation R-Value

Open cell spray foam insulation is R-3.6 to R-3.9 per inch. This R-Value is normal for open cell spray foam.

Why do lenders not like spray foam insulation?

So why is it a problem for mortgage lenders? By sealing the roof space with this material, air circulation can be restricted to the roof and timbers. This can lead to condensation, which in turn can eventually lead to the rotting of the wooden roof supports.

Should I spray foam my attic?

That's because open-cell spray foam can transmit air and moisture. Closed-cell spray foam is a better choice for keeping subfloor moisture at optimal levels, while open-cell spray foam is a better choice for walls and attics, because it allows homes to “breathe,” Yates said.

Is spray insulation a good idea?

Spray foam great insulating properties and is relatively easy to get into difficult to reach areas where traditional insulation simply wouldn't work or would be very difficult to make work.

Does spray foam increase home value?

Home inspections coupled with lower energy bills will certify your home's thermal efficiency and value. Investing in ThermoSeal Spray Foam Insulation will boost your home's resale value making it the best investment money can buy.

Can you get a mortgage on a house with spray foam insulation?

Mortgage lenders generally rely on the surveyor to identify the insulation present and either use that valuation to make a judgment call, some lenders and most Equity Release providers refuse to lend against properties with spray foam insulation as a blanket rule.

Is spray foam insulation safe for homeowners?

It is very important to clarify that spray foam insulation, when installed properly by professionals, is a safe type of insulation. In fact, once it has cured properly, it will even contribute to improving the indoor air quality of your home.

Will termites eat through foam insulation?

Researchers have concluded that termites do not eat the foam board insulation but they will tunnel through it. Insulation also provides potential protection from predators and also retains moisture, two requirements of termites.

Does spray foam crack?

The curing process after spray foam is applied inherently entails shrinkage and hardening. Not only can such shrinkage result in pulling back from stud bays and other connections - which often leads to gaps in the insulation layer - it can lead to cracking within the foam structure itself.

Can spray foam rot your roof?

Studies show that open-cell spray foam is risky in colder climates. Indoor moisture diffuses through the foam and comes in contact with the cold roof sheathing. The spray foam traps the moisture against the roof, which results in eventual decay.

What happens when spray foam insulation gets wet?

You know your home has spray foam insulation if wall and floor cavities are filled with hard white foam. Though spray foam doubles as a moisture barrier and creates an air-tight seal, the leak is still problematic because water can damage the wood surrounding the insulation.

Which insulation is best?

Fiberglass, cotton, and mineral wool can all work as loose-fill material, but the far and away top choice for blown-in insulation is fiberglass. Contrary to batts insulation, blown-in fiberglass insulation is perfect for filling in tight voids around wiring, pipes, or any area with awkward framing.

Is spray foam insulation more expensive than fiberglass?

Spray foam insulation is considerably more expensive than fiberglass insulation. In some cases, the price of spray foam insulation can exceed that of fiberglass by three times over. As such, fiberglass is often the insulation material of choice for those searching for an inexpensive insulation solution.

How thick should spray foam insulation be?

“Normally, what we teach is that all foam applications should be installed in 3/4-inch to 3-inch-thick lifts. If foam is applied thick and quick — say, 4 inches thick — you gain yield. You can cover more wall with less foam. But the foam will be less dense.