Is OSB board good for subfloor?

A well-installed subfloor should last as long as the house itself, but OSB is slightly more flexible than plywood, so it is not the best choice under heavy flooring like ceramic or stone tile.

Is plywood or OSB better for subfloor?

OSB has a lower resale value than plywood due to its lower strength. For this reason, few homeowners prefer OSB in their homes. Apart from costs, plywood is superior in all the other areas, such as the strength of the structure. For this reason, it's a superior material for use on the subfloor.

Can you use OSB board as a subfloor?

Most local codes allow OSB to be used for subflooring. It's always best to check with your local permitting office before using OSB for your subfloor. One advantage that OSB has over plywood is its larger formatting. For plywood, 8-foot and 10-foot long sheets of plywood are standard.

Is OSB good for underlayment?

Instead of alternating thin layers that can delaminate when they get wet, OSB consists of criss-crossing chips that are highly resistant to separation. An OSB board absorbs moisture less readily than plywood, and the main problem with an OSB subfloor getting wet is that the edges of the individual sheets can swell.

What is best material for subfloor?

Plywood. Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

Which is better, OSB or Plywood?

How thick should OSB subfloor be?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch.

Can you use OSB for bathroom subfloor?

OSB Subflooring

However, OSB is known for swelling around the edges when exposed to water. For tile flooring, this can cause bending and cracking, which is why it is discouraged as a subfloor material for tiling.

What happens if OSB board gets wet?

Your framing lumber and the oriented strand board (OSB) are going to be fine. The glues used to make OSB are water-resistant because the manufacturers know that virtually no one can build a home that won't get wet before the roof and siding is applied.

Which side goes down on OSB subfloor?

OSB also has stamping that reads “This Side Down”. This directs the worker on the correct orientation of the board when installing. The side with the stamp is the smoother side. When installed smooth side down, the rough surface will then face up and give the worker traction for safety.

Can I install vinyl plank flooring over OSB?

Yes, provided it meets the specifications required for subfloor preparation. Bear in mind that plywood and OSB substrates tend to get 'roughed up' during construction, and any imperfections in the surface will eventually telegraph through to the surface of the floor.

Whats stronger OSB or plywood?

Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists. However, nail-holding ability controls performance in shear wall applications.

What can I use instead of a subfloor?

The most affordable alternatives to plywood are undoubtedly particle boards. Made by condensing wood particles, particle boards are also much more lightweight than plywood and MDF. Its slick and smooth finish makes it a great flooring material.

Which is more water resistant OSB or plywood?

Plywood is porous and is susceptible to damage when exposed to water for longer time. OSB is not water resistant and hence cannot be used for exterior projects.

What is the best plywood to use for a subfloor?

Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring. The tongue-and-groove edges interlock to resist movement along the panel edges and create an overall stiffer floor.

Do you nail or screw subfloor?

Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.

Is OSB board water resistant?

As a general rule, most OSB are water resistant. Due to their construction process using wood strands, resins and wax they come fairly water resistant. However, if you're looking for a truly waterproof OSB you need to make sure it is stamped stating so.

How long will OSB last?

Panels protected by shingles or steel roofing, or behind siding or brick veneer will normally last as long as the structure stands. OSB, which is protected from the elements or sealed with paint or stain, can last for decades. Some exterior OSB wall panels are even guaranteed for 50 years.

What can I put on OSB to make it waterproof?

Sealing OSB. For cases where OSB is more likely to be exposed to moisture, it's a good idea to coat the OSB on the surface and edges with a waterproofing product, such as Thompson Water Seal, Flex Seal, or Liquid Rubber's waterproofing sealant. Even latex paint will work.

Does OSB board warp?

OSB is built by pressing smallers strands of wood together with glue and wax in a hot press. OSB looks a lot like a collage of different wood chips. Unlike it's plywood counterpart, OSB lacks the forces that tend the wood to warp, and so is easier to get perfect dimensions and avoid warping tendencies.

Is OSB cheaper than plywood?

OSB is less expensive than plywood. To build a typical 2,400-square foot home, OSB may cost $700 less than plywood. OSB is considered by many to be a “green” building material because it can be made from smaller-diameter trees, such as poplars, that are often farmed.

Can 7/16 OSB be used for subfloor?

Oriented strand board, or OSB, is a wood structural panel that can also be used for flooring. It is made from shredded strands of wood pressed together with wax and a special adhesive, then hot pressed into a panel with up to 50 layers of strands. OSB can be used for subfloors, although it is not as common as CDX.

Why is OSB so expensive?

OSB is expensive because it takes a long time to expand lumber mills and increase their supply output.

What thickness should a subfloor be?

Subfloor sheets for both OSB and plywood come in 4 by 8 or 4 by 12 sheets. Thicknesses for products used for subfloors are generally 23/32 inch (just under 3/4 inch), but thicker sheets are available where building codes call for them.

What is the best subfloor for a bathroom?

Pressure treated 3/4″ plywood subfloor is the best subfloor material for bathrooms. Pressure treated plywood is water resistant and will withstand the humid, damp bathroom environment much better than untreated plywood or OSB.