Is Oak a tonewood?

Oak is an affordable yet neglected tonewood. Its tonal characteristics are decent (lively, warm, clear) but its working characteristics (large pores, brittle, coarse) make it a second-class choice for bodies, necks and fretboards. It can be and is used to varying results in guitars and basses.

Is oak good for guitar bodies?

Oak can be used as a tonewood and is somewhat commen for acoustic guitars but when compaired to other tonewoods it's hard to work with. It's also a bit heavy and dence for electric guitars so if you use it, it won't sound "normal". That may or may not be a good thing.

Is White Oak a good tonewood?

White Oak is another wood with a low velocity of sound and a high degree of internal damping. It's stiffer than almost all the other tonewoods, and also very dense. This gives it a “bright” sound across the tonal spectrum, with strong fundamentals, and a rapid note decay.

What kind of wood is tonewood?

There are two kinds of Ash Tone Wood: Northern Hard Ash and Southern Soft Ash more commonly known as Swamp Ash. Swamp ash tonewood is taken from trees that have their roots growing below water level, and is a relatively lightweight, porous wood found in the swamps (typically the Louisiana Bijou) in the Southern USA.

Can oak be used for a guitar neck?

Oak would be plenty fine for a neck as you won't find many domestic hardwoods stronger than oak.

Ben's opinion on using oak in a guitar build - Podcast 116

Does oak make good tonewood?

Oak can be a good tonewood, though it is rare to find it in commercially-available acoustic and classical guitars.

What wood is best for guitar body?

Mahogany, mainly used in the acoustic world, for back and sides. It is the most commonly used hardwood because it's relatively economical, durable, attractive, easy to work with and resonant. Mahogany became popular in guitars because it is attractive and cheaper to get than rosewood.

What wood is best for acoustic guitar?

What wood is good for acoustic guitars?

Spruce and cedar are the most frequently used woods for the soundboard of an acoustic guitar. This is the most common wood used for the tops, it is highly resonant, and has a well balanced and bright tone.

Is Poplar a good tonewood?

Poplar is a relatively common electric guitar body material, up there with basswood and swamp ash, though not as popular as mahogany and alder. Its lightweight and neutral tone make it a well-rounded wood, tone-wise.

Is black walnut a good tonewood?

Black walnut is a prized tonewood sought after for its gorgeous dark grain structure, especially in the heartwood. The structure of walnut ranges from dark to lighter shades of brown with pronounced interlaying yellow or goldish strips. The most popular kind is flamed (claro) walnut.

What does mahogany sound like?

As a guitar top, dense mahogany has a solid, punchy tone with low overtone content and good high-end response. Mahogany back and sides often emphasize bass and treble, with more overtone coloration and a “woody” sound (as opposed to the more metallic sound of, say, rosewood back and sides).

Is Walnut good for guitars?

Walnut is remarkably easy to bend and work into guitar backs and sides. It's a great choice for acoustic and classical guitars and is an option available with several big-name manufacturers/brands. Walnut back and sides will yield a strong low-end and midrange response while maintaining the clarity it's known for.

Is Pine a good guitar wood?

Pine is a good yet rare tonewood for solid electric guitar bodies and acoustic guitar tops. However, it's largely too soft and weak for use in necks (unless laminated with other wood), back and sides, or fretboards. It's lightweight and offers a warm tone with clear highs and decent projection.

Is Cedar a good wood for guitars?

Cedar is the most popular top tonewood for classical guitars and is an excellent choice for steel-string acoustics as well. A variety of cedars can be seen in acoustic guitar tops and necks, though it's uncommon to see it used as a back and sides material and certainly as a fretboard material.

What is the most soundproof wood?

Is maple a good tonewood?

In addition to its stunning visual appeal, maple is also a highly regarded tonewood. The tone and sound maple instruments produce are unique because the tonewood has amazing strength and is quite dense. The unique curls or strips in the bigleaf maple wood make it visually appealing and desired by instrument builders.

What wood is a Les Paul made of?

Its typical design features a solid mahogany body with a carved maple top and a single cutaway, a mahogany set-in neck with a rosewood fretboard, two pickups with independent volume and tone controls, and a stoptail bridge, although variants exist.

What wood has the best resonance?

Honduras Rosewood, a very unique wood with unparalleled sound qualities grows in the heart of Central America. The beauty of its resonance can even be heard on a raw-cut piece of wood Honduras Rosewood, which is also known for its hardness and durability.

What kind of wood does Fender use?

When you're looking over the specs of a Fender electric guitar or bass, one of the first things you'll see listed is the kind of wood the body is made of. And with few exceptions, two mainstay woods have been used throughout Fender history for fashioning electric instrument bodies — alder and ash.

Is cherry wood good for guitars?

Cherry is a rarely-used, medium-weight wood with a clean, balanced, articulate tone, making it a good choice for guitar bodies. Its stiffness and projection make it a decent top wood, while its bendability and strength make it a good back/side wood. Cherry is never used in fretboards.

Is Ash good guitar wood?

Ash is a very strong and dense hardwood that typically features straight grain and light colour. Sonically is produces more treble and good sustain which results in a brighter and more pronounced tone than some other tone woods.