Is Lime Away safe for fiberglass?

For hard water stains, soap scum and calcium deposits, use a mineral deposit removal product such as Lime-A-Way, CLR or Zud. For areas with black grime or algae, use a mixture of equal parts of household bleach and water.

How do you remove limescale from fiberglass?

What should you not use LIME-A-WAY with?

LIME-A-WAY^® is not recommended for use on natural marble, stone, terrazzo, polished or anodized aluminum, metallic or painted surfaces, colored grout or counter tops. Please see product label for full details and precautions.

Does CLR damage fiberglass?

Yes, CLR is found to be safe on fiberglass. Always spot test first in an inconspicuous area.

How do you get hard water stains off a fiberglass tub?

Combine an equal amount of baking soda with water or white vinegar to create a thick paste. Apply the paste to the bathtub while it remains wet by gently rubbing it over the hard water stain. After you apply the paste, let it sit for 10 to 15 minutes and then wipe it off with a soft sponge or a nylon brush.

HOW TO REMOVE HARD WATER STAINS || CLEAN LIMESCALE OFF FIXTURES

Can I use lime away on a fiberglass tub?

Remove Soap Scum and Stains

For hard water stains, soap scum and calcium deposits, use a mineral deposit removal product such as Lime-A-Way, CLR or Zud. For areas with black grime or algae, use a mixture of equal parts of household bleach and water.

What is best cleaner for fiberglass tubs?

Use mild, household acids like vinegar and hydrogen peroxide. For abrasive effects, mix your mild acid with baking soda and dishwashing soap. Leave your cleaning paste overnight, then wipe it off and rinse with cold water.

What is the best way to clean fiberglass?

Before you give up on trying to scrub away the stains, try the cleaning process Home Depot recommends for tough stains on fiberglass: Smear on a paste of baking soda and water, and cover that with a towel soaked in vinegar. Wait one hour, then rub with a cloth or sponge. Rinse. Wipe again with a clean microfiber cloth.

Can I use CLR on gelcoat?

CLR is what I use, and it works great. I use it on my motor as well, and it comes out like new. The gel coat will look like you just had it detailed.

What is the best way to clean a fiberglass shower?

What is better CLR or Lime Away?

Both CLR and Lime Away are excellent tools for cleaning your kitchen and bathroom. Lime Away's spray bottle makes it the easier to apply option. CLR seems to have a slight edge in how effectively it removes certain stains. Either will be far more effective than any all-purpose cleaner with minimal scrubbing needed.

Is Lime Away corrosive?

HARMFUL IF SWALLOWED. Read precautions on back. / KEEP OUT OF REACH OF CHILDREN DANGER: CORROSIVE. HARMFUL IF SWALLOWED.

How long should Lime Away sit?

Apply a generous amount of LIME-A-WAY® Toilet Bowl Cleaner directly onto tough stains. For severe, tough stains, if possible remove water from the bowl before applying liquid. Let soak for 15 minutes, do not close the bowl lid. Brush entire bowl thoroughly with a bowl brush and then flush.

Can you use lime away on acrylic tubs?

You can use vinegar and lime away to remove them. To prevent them, it's best to only use approved cleaners and products to clean your acrylic bathtub.

Will vinegar remove oxidation from fiberglass?

Vinegar Fiberglass Cleaner

Make sure that you get the spray into any cracks or crevices while spraying. Sprinkle baking soda onto the sprayed surface of the fiberglass. Pour some of the vinegar onto the sponge and gently wipe down the area using a circular motion.

Can I use CLR on a fiberglass boat?

Fiberglass and Stainless Steel Parts

Use CLR® Calcium, Lime & Rust Remover— for gunk that can build-up on stainless steel components like your boat ladder, cleats, cup holders, and connector flanges. You can also use it to keep your boat's fiberglass body clean and smooth.

How do I get hard water stains off my fiberglass boat?

Go get one cup of white vinegar, then mix it in two gallons of water. Dip a clean cloth into the solution, and then wipe your boat down. Rinse with warm water afterwards, then squeegee for a thorough clean. Easy peasy!

How do you clean a fiberglass hull?

If you want your fiberglass boat to regain some of its lost luster, a simple soap and water wash is the easiest first step to follow. Rinse off your boat with warm, clean fresh water. Use a specialized boat cleaning soap, and follow the instructions for mixing amounts into a bucket of water.

Can you use OxiClean on fiberglass?

It will also clean most stains on fiberglass, teak, and sails. I love this stuff. OxiClean does not ruin clothes when used properly.

Can you use Windex on fiberglass?

Just basic soap and water will usually do the trick and won't damage the fiberglass. Most window cleaners like Windex and similar products are safe to use without causing damage to the glass or the fiberglass framing. Avoid using abrasive cleaners that could scratch the glass.

Is Mr clean Magic Eraser safe for fiberglass tub?

Spray and clean with a sponge, and save the balance to clean mirrors, windows and appliances. Some people insist that there's no better method for cleaning your fiberglass shower than to use a magic eraser. They recommend that you use an oven cleaner with the magic eraser.

How do you make a dull fiberglass tub shine?

Is my tub fiberglass or acrylic?

Look around the tub's edges and see if it appears thinner; this could be an indication that it is acrylic. Acrylic tubs usually come in more colors than fiberglass tubs, as fiberglass tubs are commonly white. Acrylic also feels warmer to the touch than fiberglass, and tubs made of acrylic have smoother finishes.

How do I get my fiberglass tub white again?

Fiberglass bathtubs may start to turn a yellowish color as a result of soap scum or hard water. These stains can be very difficult to remove. However, a mixture of cream of tartar and hydrogen peroxide will easily remove any stain and restore the tub to its original white color.