Is it worth stripping copper wire for scrap?

If you chose to strip it, you will end up with 90 pounds of copper don't forget 10 pounds in plastic waste and in today's market you will get $1.90 per pound for stripped copper wire so your 90 pounds will net you $171.00 difference of $21.00 between stripping it or selling the way it is, just want to mention one thing ...

Is stripping scrap wire worth it?

So is stripping copper wire worth it? Yes, absolutely if you have a wire stripper. If not, then sometimes, but most likely only if you have wires you're sure have a high copper recovery rate.

What wire is worth stripping for scrap?

The most valuable type of scrap copper wire is bare bright copper. This uncoated and unalloyed copper is stripped of insulation, paint, and other impurities, making it easy to reuse or recycle. As such, it is usually the first thing that scrap buyers look for.

Is burnt copper worth less?

(When you burn copper wire, it loses about half its weight, depending on the type of wire.) On the other hand, if you were to strip the same wire, you would make at least $31! If you DO want to strip the wire yourself, you will generally get Copper #1, the highest value copper available.

Is Romex stripping worth it?

By stripping the Romex® Wire you can make between 10 and 30% more money depending on what level of time and investment that you put into it. Through talking to multiple scrappers over the years we have found that about 50% of people sell as is and 50% will strip it down further.

Is It Worth Stripping Copper Wire For Scrap? Should You Buy a Stripper?

Why do Scrappers cut cords?

It is a reusable, recyclable material. Most scrap yards pay more for pre-stripped wires, and non-stripped power cords are heavily discounted by scrap yards so that you will get less payment.

What is the best thing to scrap for money?

What appliances have the most copper?

Household appliances

Refrigerators, stoves, and air conditioners in particular are great sources of copper as they require a larger power supply and therefore tend to contain thick insulated copper wire.

Is 12 wire worth stripping?

the way it is with insulation, that would translate in to $130.00 for your 100lbs of 12-gauge wire, without stripping it. If you were to strip it, your 75lbs of copper would bring you $1.90 per pound $142.50 the difference between stripping and selling it the way it was would be $12.50.

What has the most copper in it to scrap?

Older appliances have more copper which gives you more scrap and more money. Washers, dryers, refrigerators, and air conditioners make great scrap appliances for their copper coils.

How do you clean scrap copper wire?

To clean the copper wire, first, mix together 1 tablespoon of salt with 1 cup of vinegar to make a cleaning solution. Let the wire soak in the solution for 10 minutes to an hour. Then, use a nylon brush or sponge to scrub off any corrosion or dirt.

How do you remove insulation from copper wire for recycling?

By simply squeezing the handles about 3/4" from the end of the wire and then twisting it slightly the insulation will be cut free. Then by pulling the wire strippers towards the end of the wire, the insulation should slide right off of the copper wire.

Can you burn insulation off copper wire?

NO BURNING: First and foremost, we would like to reiterate that you should NEVER under any circumstances “burn” your copper wire to remove the insulation. Not only does it harm the environment from the fumes, but it will downgrade your copper at the scrap yard.

What is considered clean copper?

Narrowing in on copper

Bare bright copper wire is defined as clean, bare, uncoated, unalloyed copper wire, not smaller than No. 16 gauge wire. Bare bright also should be free of copper tubing, burnt copper wire and nonmetallics.

What is the highest paying scrap metal?