Is it safe to put Clorox in your well?

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.

Is it good to put bleach in your well?

You can disinfect your well with household chlorine bleach, such as Javex®. Use fresh chlorine bleach to ensure an effective disinfection of the well.

What happens if you pour bleach in your well?

According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.

How much Clorox should I put in my well water?

CALCULATE AND POUR: Pour 3 pints of chlorine bleach per 100 gallons of water plus an additional 3 pints into your well as described above. MIX: Attach a clean garden hose to the outdoor faucet nearest the well and place the end of the hose inside the well.

How much bleach is safe to put in a well?

Add 1 litre (1 quart) of household bleach for every 1.5 metres (5 feet) of depth of water. If you don't know how high the water stands, use the well casing depth to estimate how much household bleach to use.

How to Disinfect Your Well

How long after bleaching well Can I drink water?

Once the chlorinated water has reached all the appliances, fixtures and faucets, let the chlorinated water stand in the well and plumbing system for 8 hours. WHILE THE CHLORINE IS IN THE SYSTEM DO NOT DRINK THE WATER. CONTACT WITH THE WATER MAY CAUSE SKIN, EYE AND NOSE IRRITATION. 12.

How long after bleaching well can I shower?

Step 6 WAIT at least 12 hours before turning faucets back on. Do not drink, cook, bathe, or wash with water from your faucets during this time because it has high amounts of chlorine in it.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

What is a natural way to clean well water?

You can boil the well water for 5 minutes. With this, all the bacteria inside it will be eliminated. However, boiling will not be able to remove the solids and other materials inside the well water. The use of chlorine drops or iodine tablets can effectively kill the bacteria in the well water.

What kind of bleach do you put in a well?

Use liquid household bleach containing 5.25% chlorine for the disinfection process. Do not use bleach with a "fresh scent," lemon fragrance, or other cleaners added. One gallon of bleach will treat up to an 8-inch diameter well containing 100 feet of water.

How do you sanitize a well?

Rinse the inside of the well casing with a garden hose or bucket for 5-10 minutes. Open all faucets inside the home and run the water until you notice a strong odor of chlorine (bleach) at each faucet. Turn off all faucets and allow the solution to remain in the well and plumbing for a minimum of 12 hours.

How long will bleach treated water last?

Chemical treatments (including household bleach or iodine) can be used every 6 months to a year to keep the water potable. However, the best practice is to drain water storage, clean containers, and replace them with new potable water about every two years or sooner.

Should I put bleach in my water storage?

However, the use of bleach bottles for water storage is not recommended, because of the potential danger of accidentally drinking bleach instead of water. If bleach bottles are used for water storage, remove the bleach label and write “WATER” indelibly across the bottle.

How often should you chlorinate your well?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria.

How do you shock a well with chlorine bleach?

Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.

Can I put vinegar in my well?

The well has been flooded or exposed to bacterial contamination in another manner, such as a crack in well cap. Liquid chlorine in the form of household bleach and food grade white vinegar can be used to disinfect your well.

Should I shock my well?

Shock chlorination is a method of disinfecting a water well. It is recommended when a water system is contaminated with bacteria. Contamination can occur when the well is installed, when repairs are made to the pump or plumbing, or when rainfall runoff enters the well.

Can I put chlorine tablets in my well?

the well has been flooded or exposed to bacterial contamination in another manner, such as a crack in the well cap. Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well.

How long should you run water after chlorinating well?

How long should you wait to use water after you chlorinate a well? As said above, it might take anything from 30 minutes to 24 hours to remove all of the chlorine from a well. After that, you'll need to wait a little longer to ensure that chlorine has had enough time to circulate and flush from your home's plumbing.

What does it mean when your well water turns brown?

If your area has received more rainfall than usual, brown well water can result from rusty plumbing, rainwater runoff contamination, or septic cross-contamination.

How do you store well water long term?