Is it OK to put bleach in a well?

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.

Is it good to put bleach in your well?

You can disinfect your well with household chlorine bleach, such as Javex®. Use fresh chlorine bleach to ensure an effective disinfection of the well. Chlorine can evaporate and lose half of its strength in 6 months. Don't use scented bleach, to avoid adding extra chemicals to your water.

How long should you wait to drink water after you chlorinate a well?

Once the chlorinated water has reached all the appliances, fixtures and faucets, let the chlorinated water stand in the well and plumbing system for 8 hours. WHILE THE CHLORINE IS IN THE SYSTEM DO NOT DRINK THE WATER. CONTACT WITH THE WATER MAY CAUSE SKIN, EYE AND NOSE IRRITATION. 12.

What kind of bleach should I use in my well?

What Kind of Chlorine Bleach Should Be Used? Use the plain (and generally least expensive) unscented household chlorine bleach with at least 5% sodium hypochlorite found in supermarkets; do NOT buy fresh scent, lemon or other scented chlorine products.

How much bleach should I put in my well water?

4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach - (4 quarts in a gallon). Do not use excessive amounts of bleach - more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well.

How to Disinfect Your Well

How long can you leave bleach in a well?

Mix the bleach with the well water.

Then place the hose in the hole where you poured the bleach, allow the water to run back into the well for 15-20 minutes.

How often should you bleach a well?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.

Can I put Clorox bleach in my well?

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

What happens if you put too much bleach in well?

According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.

Can I shower after bleaching my well?

Step 6 WAIT at least 12 hours before turning faucets back on. Do not drink, cook, bathe, or wash with water from your faucets during this time because it has high amounts of chlorine in it.

What is a natural way to clean well water?

You can boil the well water for 5 minutes. With this, all the bacteria inside it will be eliminated. However, boiling will not be able to remove the solids and other materials inside the well water. The use of chlorine drops or iodine tablets can effectively kill the bacteria in the well water.

Can I put chlorine in my well?

the well has been flooded or exposed to bacterial contamination in another manner, such as a crack in the well cap. Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well.

How do you bleach a well system?

Overview. Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.

How often should a well be cleaned?

9. As a routine maintenance practice, clean your well at least once a year. If you have an iron or sulfur bacteria problem, clean more often.

How much bleach does it take to purify 50 gallons of water?

To disinfect your 50 gallon hot water heater requires 1.5 cups of bleach left in the tank for two hours or 3/4 cup of bleach left overnight. For a 30 gallon tank, cut the amount in half. Keep in mind that a bit too much usually doesn't hurt anything.

How can you tell if your well water is bad?

How do I get rid of E coli in my well water?

If E. coli is found present in your water sample, discontinue consumption of the water unless you treat it. Treatment can be achieved by boiling the water for at least one minute. Water should be treated for drinking, making baby formula, washing produce, brushing teeth, and making ice cubes.

How much does it cost to chlorinate a well?

To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 - $200.

Should I shock my well?

Shock chlorination is a method of disinfecting a water well. It is recommended when a water system is contaminated with bacteria. Contamination can occur when the well is installed, when repairs are made to the pump or plumbing, or when rainfall runoff enters the well.

Can bleach in your water hurt you?

Drinking a bleach solution can cause vomiting, nausea, throat, and stomach irritation. The vomit is likely to have a chlorine smell to it. Contact with chlorine gas can severely burn and irritate the eyes, skin, nose, and throat, possibly causing permanent damage.

Why does my well water smell like sewer?

If your cold well water smells like sewage, it can be the result of several causes: Hydrogen sulfide from iron, sulfur or other types of bacteria naturally occurring in your well water. Contaminated pipes with layers of bio-film caused by various types of iron, sulfur, or other types of bacteria.

How do you keep whites white with well water?

There are a couple of alternatives to get your whites white. Wash your whites with regular detergent, add 1/2 cup of hydrogen peroxide or a scoop of borax to each load, and line dry them in the sun. You can also purchase a product called Iron Out and add it to the rinse cycle after using bleach.

Do I need to clean my well?

Why Does My Well Need To Be Cleaned? The top two reasons your well may need cleaning are bacteria and encrustation. In the upper area of your well the presence of oxygen encourages aerobic bacterial growth and the oxidation of metals.