Is it better to run your pool pump during the day or at night?

It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
Takedown request   |   View complete answer on mrpoolman.com.au


When should I run my pool pump day or night?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
Takedown request   |   View complete answer on teddybearpools.com


Why is it better to run the pool pump at night?

The water moving around helps protect the chlorine from being burnt out from the sun. If you run your pump during the night, then the sun has all day to attack the chlorine that's standing still in your pool. That can cause algae fast! It's a great idea to have the pump running when people are using the pool.
Takedown request   |   View complete answer on chlorinekingpools.com


What time of day is best to run a pool pump?

The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
Takedown request   |   View complete answer on sunloverheating.com.au


How many hours per day should I run my pool pump?

Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
Takedown request   |   View complete answer on swimmingpool.com


Should I run my pool pump during the day or at night?



Does a pool pump use a lot of electricity?

Pool pumps can consume 3,000 to over 5,000 kWh per year. In addition, pumps may also circulate water through heaters, cleaners (also known as sweeps), water features, or fountains.
Takedown request   |   View complete answer on nrel.gov


Should I turn off pool pump when raining?

If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.
Takedown request   |   View complete answer on myperfectpool.com.au


What's the best time to run a pool filter?

For energy efficiency best time to run the pool's filtration system is during off-peak hours when the electricity demand is lower. This time is typically between 8 p.m. - 10 a.m. Also, to warm the pool you can run it during the day, to cool it at night.
Takedown request   |   View complete answer on knowledgebase.royalswimmingpools.com


How many hours a day should you run your pool pump in the winter?

Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
Takedown request   |   View complete answer on blog.hayward-pool.com


How many hours should I run my pool pump in the summer?

So how long should the average pool pump run during the summer? To make this process simple, it easier for homeowners to follow this basic guideline: for every 10 degrees of outdoor temperature run your pump for one hour. So if the average temperature is 60 degrees, run your pump for 6 hours.
Takedown request   |   View complete answer on crystalpoolsfl.com


Is it OK to run pool pump 24 hours a day?

A Rule of Thumb

Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.
Takedown request   |   View complete answer on poolsuppliescanada.ca


Can you swim with pool pump on?

Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.
Takedown request   |   View complete answer on troublefreepool.com


How much does it cost to run a pool pump per hour?

12 cents per kWh = 4.97 per day to operate the pool pump. Now if you are running the same pump, but with 230 Volt, the cost will be 2.49 per day.
Takedown request   |   View complete answer on beemerpools.ca


Does the pool pump need to be on all the time?

The water must be circulating so the chemicals get distributed throughout the water. You can — and should — add pool shock at night, though. The sun can burn shock off during the hot daytime hours, but you still need to have the pump running to circulate the water.
Takedown request   |   View complete answer on home.howstuffworks.com


How long can I leave my pool pump off?

Before leaving for your trip, make sure that the filter is clean and running so that it can catch any debris in the pool. Then, turn off the pump and use an extra filter to keep everything running smoothly while you are away. Be aware that the longest amount of time a pump should be off is two weeks.
Takedown request   |   View complete answer on poolownersacademy.com


Should I run my pool pump at night in winter?

Outside temperature will affect how long you run your pump. At temps above 65 degrees you need longer daily operation. And, at temps below 35 degrees run the pump for 24 hours to prevent freezing.
Takedown request   |   View complete answer on blog.intheswim.com


At what temperature will inground pool pipes freeze?

If you have an above ground pool with the pool filter system and plumbing above ground (like nearly all above ground pools), pipes and pumps can freeze up in less than an hour of minus 32 degrees. The same is true for inground pool equipment that is not running when temperatures are below freezing.
Takedown request   |   View complete answer on blog.intheswim.com


Will running pool pump prevent freezing?

Helpful tips to keep your pool and its equipment safe during freezing temperatures. Run your pool pump continuously when temperatures are near or below freezing. You don't need to run your heater, moving water likely will not freeze. Disconnect any aerators and lines to slides.
Takedown request   |   View complete answer on pinchapenny.com


How long should you wait to swim after adding chlorine?

Liquid chlorine — In general, it's a good idea to wait at least four hours after putting liquid chlorine in the pool. The size of your pool and the amount of chlorine added does play a factor in this, too. Once your levels reach 5 ppm or lower, you're ready to swim.
Takedown request   |   View complete answer on narellanpools.com


How long should I run my variable speed pool pump?

However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation.
Takedown request   |   View complete answer on clearcomfort.com


How long should you run filter after shocking pool?

While shocking your pool will help kill any germs any algae, it won't actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.
Takedown request   |   View complete answer on poolcareguy.com


Is rainwater good for swimming pool?

Rainwater itself does not cause algae, but it can provide the right environment for algae. Rain will bring phosphates, nitrates and other organic contaminants into the pool. As we discussed earlier, rain also reduces chlorine levels.
Takedown request   |   View complete answer on aquaramapoolsandspas.com


Should you shock your pool every week?

Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
Takedown request   |   View complete answer on sundancespasedmonton.com


How often do you backwash a pool filter?

As a general rule, you should be backwashing your pool about once a week or in conjugation with your scheduled maintenance. Another industry standard is to backwash when your filter's pressure gauge reads 8-10 PSI (pounds per square inch) over the starting level or “clean” pressure.
Takedown request   |   View complete answer on ecooutdoorusa.com