Is it better to run a pool pump at night or day?

The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
Takedown request   |   View complete answer on sunloverheating.com.au


Is it better to run pool filter at night or day?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
Takedown request   |   View complete answer on teddybearpools.com


Why is it better to run the pool pump at night?

The water moving around helps protect the chlorine from being burnt out from the sun. If you run your pump during the night, then the sun has all day to attack the chlorine that's standing still in your pool. That can cause algae fast! It's a great idea to have the pump running when people are using the pool.
Takedown request   |   View complete answer on chlorinekingpools.com


What is the best schedule for a pool pump?

Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
Takedown request   |   View complete answer on swimmingpool.com


How many hours a day should I run my pool pump?

The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
Takedown request   |   View complete answer on swimmingpool.eu


Should I run my pool pump during the day or at night?



Do pool pumps use a lot of electricity?

Outside of the air conditioner, the pool pump is the largest electricity consumer in the average pool-containing home. According to the study, at the national average of 11.8 cents per KWh, a pool pump alone can add as much as $300 a year to an electric bill.
Takedown request   |   View complete answer on archive.thinkprogress.org


Do you run pool pump while swimming?

Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
Takedown request   |   View complete answer on home.howstuffworks.com


Should I run my pool pump when it rains?

The extra filtering will help clean out the impurities rain has introduced into your pool's water. Pool pumps are made to withstand rain and it is beneficial to run your pump during or after rain.
Takedown request   |   View complete answer on myperfectpool.com.au


How many hours a day should you run your pool pump in the winter?

Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
Takedown request   |   View complete answer on blog.hayward-pool.com


How much does it cost to run a pool pump 24 hours a day?

12 cents per kWh = 4.97 per day to operate the pool pump. Now if you are running the same pump, but with 230 Volt, the cost will be 2.49 per day.
Takedown request   |   View complete answer on beemerpools.ca


Is it OK to run pool pump 24 hours a day?

A Rule of Thumb

Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.
Takedown request   |   View complete answer on poolsuppliescanada.ca


How long can pool water sit without chemicals?

Without Chemicals

This should occur within 24 hours. That means the parents must go through the hassle of filling the pool with fresh water each day. This is not a good use of water. The reason the water must be drained daily is that algae and bacteria are quick to grow in stagnant water.
Takedown request   |   View complete answer on hunker.com


How long should pool pump run in summer?

How long should I run my pool pump each day? Most pool filtration systems are sized to circulate and filter the water twice in 8 hours. We recommend that you run your pool pump 6-8 hours in the winter and 10-12 hours in the summer.
Takedown request   |   View complete answer on allpool.com


How often should you backwash your pool?

As a general rule, you should be backwashing your pool about once a week or in conjugation with your scheduled maintenance. Another industry standard is to backwash when your filter's pressure gauge reads 8-10 PSI (pounds per square inch) over the starting level or “clean” pressure.
Takedown request   |   View complete answer on ecooutdoorusa.com


How long should I run my pool pump after shocking?

A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.
Takedown request   |   View complete answer on myperfectpool.com.au


How long should I run my pool chlorinator?

As the weather gets warmer you'll also want to increase the running time for each session. By the middle of summer you should be running it for 4 hours in the morning and again for 4 hours in the evening to maintain optimum pool health. There are a number of factors that really impact the chlorine levels in your pool.
Takedown request   |   View complete answer on allchlor.com.au


At what temp will pool pump freeze?

If you have an above ground pool with the pool filter system and plumbing above ground (like nearly all above ground pools), pipes and pumps can freeze up in less than an hour of minus 32 degrees. The same is true for inground pool equipment that is not running when temperatures are below freezing.
Takedown request   |   View complete answer on blog.intheswim.com


What is the winter setting on pool pump?

After a backwash and rinse, place the valve to the “winterize” setting on the top mount valve. This will allow water to drain from the valve. Next, you're going to have to completely drain all the water from the filter tank. To do this simply unscrew and remove the drain cap on the bottom of the filter barrel.
Takedown request   |   View complete answer on blog.thepoolfactory.com


How often should you shock your pool in the winter?

Whether you decide to use pool shock or not, it's still important to test and monitor the water chemistry of a covered, winterized pool during the off-season. Do this at least twice a month when the water in your pool is not frozen.
Takedown request   |   View complete answer on lesliespool.com


Should I shock my pool before or after it rains?

Give your pool a good shock treatment 1 to 2 days before the storm hits. You can bring the chlorine level up pretty high to prolong the pool being depleted of chlorine.
Takedown request   |   View complete answer on poolboys.com


Do I need to shock my pool every week?

How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
Takedown request   |   View complete answer on sundancespasedmonton.com


Should I turn off pool filter when it rains?

Answer: It should not matter much. It could help to filter debris and contaminants the rain washes into the pool. However, lightning can be a concern with the filter running.
Takedown request   |   View complete answer on waterandhealth.org


Can a pool pump electrocute you?

But ungrounded pool pump motors pose the serious threat of electrocution. When a device or product is defective, improperly installed or maintained, or if a component of that device is worn or frayed, anyone who comes in contact with water charged with an electrical current is at risk of electric shock drowning.
Takedown request   |   View complete answer on masstorts.com


How do I reduce the power consumption of my pool pump?

8 Ways to Reduce Your Pool's Electricity Efficiency
  1. Use the smallest, most energy efficient pump for your pool size. ...
  2. Pool pumps often run longer than necessary. ...
  3. Install and use larger pool filters. ...
  4. Use a timer for shorter pumping cycles. ...
  5. Take a look at the plumbing going to the pool. ...
  6. Clog and debris-free drains.
Takedown request   |   View complete answer on apge.com


How do I make my pool pump more efficient?

As you design your new pool or make plans to upgrade your existing one, keep these 10 strategies in mind:
  1. Pick the right finish. ...
  2. Create a natural windbreak. ...
  3. Install a variable-speed pool pump. ...
  4. Optimize your pool's plumbing. ...
  5. Use advanced heating technology. ...
  6. Install an automatic pool cover. ...
  7. Use larger pool filters.
Takedown request   |   View complete answer on lathampool.com
Previous question
Can you make your own chlorine?